Tipp: Alle Infos zu Software-Updates!

Übersicht über aktuelle Updates für die Garmin Modelle Montana 600/650/650t, Oregon 450/450t/550/550t, GPSmap 62/62s/62st/78/78s, Dakota 10/20 und eTrex 10/20/30. Die Installation erfolgt – außer bei Beta-Software – über den Garmin WebUpdater, dabei unbedingt die jeweiligen Hinweise beachten!

Montana Software Versionen 3.10, 3.20, 3.30, 3.40, 3.50, 3.60, 3.63 Beta, 3.64 Beta, 3.66 Beta, 3.67 Beta, , 3.68 Beta, 3.70, 3.80, 3.90

  • Changes made from version 3.80 to 3.90:
  • Fixed possible software hang with 'white screen' when powering unit off in mount.
  • Fixed Address/Intersection searching when set to French language.
  • Changes made from version 3.70 to 3.80:
  • Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
  • Improved the readability of the scale text on the course deviation indicator (CDI) while in night mode
  • Fixed issue with downloading certain voices from the Garmin Garage
  • Fixed issue with reviewing BlueChart® g2 depth points from the map page
  • Fixed issue with NMEA In
  • Changes made from version 3.60 to 3.70:
  • Added new configurable data field options: Alarm Timer (from alarm clock page), Automotive Turn (lane assist), Avg. Lap, Compass Heading, Current Lap, Date, Elevation Above Ground, GPS Elevation, GPS Heading, Grade (must be moving), Lap Distance, Laps, Last Lap, Location of Destination, None (blank field), Stopwatch Timer, Total Lap, Track Distance (reset when current track is cleared), Vertical Dist. to Dest, Vertical Dist. to Next. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/12/configurable-data-fields.html) for more information
  • Added data field categories
  • Added trip computer setup for additional configurability (this includes adding multiple trip computer pages)
  • Improved elevation data stored in track logs
  • Improved serial support
  • Improved Arabic keyboard
  • Improved display of configurable data fields in night mode
  • Fixed 3D View to rotate based on compass heading
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue with track log recording while using the stopwatch
  • Fixed issue that could cause some geocaches not to import
  • Fixed issue with entering the next stage of a geocache while the Routing Activity is set to Prompted
  • Fixed an issue that could occur while reviewing certain geocache descriptions
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed potential issue that could occur while reviewing certain photos
  • Fixed potential issue related to shortcuts and orientation change
  • Fixed potential issue related to setting custom background images
  • Fixed potential issue with entering a street number during an address search
  • Fixed issues with NMEA output using the AMPS Rugged Mount
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Changes made from version 3.67 to 3.68 Beta:
  • Fixed issue with power off barometric pressure trending
  • Fixed issue with barometric pressure plot when stationary
  • Fixed issue with display when entering USB mass storage
  • Fixed issue with current lap data field in dashboards
  • Improved Arabic keyboard
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 3.66 to 3.67 beta:
  • Improved display of configurable data fields in night mode
  • Fixed issue where barometer and compass data was not reported in demo mode
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Changes made from version 3.64 to 3.66 beta:
  • Fixed issue with mount profile setup
  • Fixed issue where the compass would not work unless the unit had a satellite fix
  • Fixed issue with Mac version of WebUpdater
  • Fixed intermittent issue with map drawing
  • Changes made from version 3.63 to 3.64 beta:
  • Added full profile support for Trip Computer Setup.
  • Improved display of configurable data field categories.
  • Fixed issues with supported configurable data fields in the nuvi dashboard.
  • Fixed issues with NMEA output using the AMPS Rugged Mount.
  • Changes made from version 3.60 to 3.63 beta:
  • Added new data fields: Alarm Timer (from alarm clock page), Automotive Turn (lane assist), Avg. Lap, Compass Heading, Current Lap, Date, Elevation Above Ground, GPS Elevation, GPS Heading, Grade (must be moving), Lap Distance, Laps, Last Lap, Location of Destination, None (blank field), Stopwatch Timer, Total Lap, Track Distance (reset when current track is cleared), Vertical Dist. to Dest, Vertical Dist. to Next.
  • Added data field categories.
  • Added trip computer setup for additional configurability. This includes adding multiple trip computer pages.
  • Improved elevation data stored in track logs.
  • Improved serial support
  • Fixed 3D View to rotate based on compass heading.
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue with track log recording while using the stopwatch
  • Fixed issue that could cause some geocaches not to import
  • Fixed issue with entering the next stage of a geocache while the Routing Activity is set to Prompted
  • Fixed an issue that could occur while reviewing certain geocache descriptions
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed potential issue that could occur while reviewing certain photos
  • Fixed potential issue related to shortcuts and orientation change
  • Fixed potential issue related to setting custom background images
  • Fixed potential issue with entering a street number during an address search

Beta-Version, keine Installation über den WebUpdater (siehe Garmin)

  • Changes made from version 3.50 to 3.60:
  • Added option to configure power button. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/the-need-for-speed.html) for more information.
  • Added shortcut option to toggle certain settings. See TrailTech for more information.
  • Added option to set off route recalculation from Setup > Routing.
  • Added page indicator to main menu.
  • Added scrollbars to lists.
  • Added option to avoid or allow unpaved roads in pedestrian routing.
  • Fixed shutdowns related to data field dashboards on the main menu.
  • Fixed issues with incorrect number of menu items on main menu pages.
  • Fixed display of long geocache descriptions and logs.
  • Fixed geocache ratings overlapping descriptions.
  • Fixed issue where street search would incorrectly display No Results.
  • Fixed issue where compass would not work after the unit was removed from an automotive mount.
  • Fixed issue where the route distance could be incorrect.
  • Fixed issue where calendar left and right buttons were not always responsive.
  • Changes made from version 3.40 to 3.50:
  • Improvements to the geocaching experience. See TrailTech(http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Increased maximum number of characters allowed in Address and POI searches
  • Fixed possible shutdown with some shortcuts executed from the drawer
  • Fixed possible shutdown on powerup with mount related profile changes
  • Fixed inability to change data fields on status page dashboards
  • Fixed display of photos on review pages
  • Fixed possible shutdown when viewing a custom poi with a photo
  • Fixed potential paging issues with long geocaches logs
  • Changes made from version 3.30 to 3.40:
  • Fixed shutdown viewing routes on map
  • Fixed satellite dashboard on the map
  • Fixed issue where parts of map review page were not responsive to touch
  • Fixed issue with right side controls where dashboard and icons could overlap on main menu
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue where background would not update correctly behind dashboards
  • Changes made from version 3.20 to 3.30:
  • Fixed spanner mode prompt
  • Fixed issues reviewing very long routes in route planner
  • Fixed issue with disappearing dashboard on the main menu
  • Fixed issue where selected dashboard would not show up unless page was exited and reentered.
  • Fixed issues with missing map scale.
  • Fixed shutdown related to proximity alarm POIs.
  • Added Large Data Field Dashboard.
  • Added Satellite Dashboard.
  • Added ability to sort photos On A Specific Date in Photo Viewer.
  • Added View Map button to Waypoint Manager > Edit waypoint.
  • Changes made from version 3.10 to 3.20:
  • Fixed display issues during spell searches
  • Fixed ability to enable mapsets using shortcuts
  • Fixed ability to mute or unmute volume using shortcuts
  • Fixed issue with repeated anchor drag alarms
  • Fixed issue where Move Waypoint could move the wrong waypoint
  • Fixed issues with dashboards disappearing
  • Fixed issues with Find Next Closest while geocaching
  • Fixed issue where part of the map was unresponsive to touches
  • Fixed issue where nuvi mode speed field could be red while not speeding
  • Modified default map trails to appear as dashed red lines
  • Added ability to add multiple points to a route without leaving the map
  • Changes from version 2.80 to version 3.10:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Added Restore Defaults option to setup pages
  • Fixed issue where proximity alarms would not be audible
  • Fixed issue that occurred with the altimeter page when using a 24-hour clock
  • Fixed issue where the map would sometimes not refresh when using the active route page
  • Fixed an issue where the dashboard would sometimes appear while panning on the map
  • Fixed issue with saving tracks in area calculation page
  • Fixed issue with highlighting of some shortcuts in the drawer
  • Fixed issue with the keyboard layout in landscape orientation when the system language was set to French
  • Fixed issues that sometimes occurred when exiting Where To? > Address or Where To? > Intersection
  • Modified the 'Arriving at Destination' message banner so that it no longer appears when navigating to a geocache

Infos: Garmin

Oregon x50 Software Versionen 4.80, 5.00, 5.10, 5.20, 5.40

  • Changes made from version 5.20 to 5.40:
  • Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
  • Fixed potential naming issues with imported routes from BaseCamp
  • Fixed issue with 'Hut' point type in TOPO Australia & New Zealand maps
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Fixed issue with track log recording while using the stopwatch
  • Fixed mass storage issue when used without batteries
  • Changes made from version 5.10 to 5.20:
  • Fixed potential power-up issue introduced in previous release.
  • Changes made from version 5.10 to 5.20:
  • Fixed potential power-up issue introduced in previous release.
  • Changes made from version 5.00 to 5.10:
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where the photo orientation would be incorrect in the photo viewer
  • Fixed potential shutdown while scrolling through Garmin Connect photos
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed bug that could cause some geocaches to not import
  • Changes made from version 4.80 to 5.00:
  • Modified default map trails to appear as dashed red lines
  • Fixed issue where geocache icons would sometimes not draw on the map while using Garmin GB Discoverer™ maps
  • Changes made from version 4.50 to 4.80:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Fixed issue with multilingual custom POI files

Hinweise beachten: Garmin

GPSMAP 62/78 Software Versionen 3.40, 3.50, 3.60, 3.71 Beta

  • Changes made from version 3.60 to 3.71 Beta:
  • Improved elevation data stored in track logs
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Problems with the software may be reported to 62-78Beta@garmin.com
  • Changes made from version 3.50 to 3.60:
  • Fixed an issue with the reporting of pressure from the barometric altimeter (GPSMAP 62s/62st/78s/78sc)
  • Changes made from version 3.40 to 3.50:
  • Added Photo Viewer application
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed bug that could cause some geocaches to not import
  • Fixed issue with track log recording while using the stopwatch
  • Fixed issue with the anchor drag alarm
  • Fixed issue with total ascent and total descent fields not displaying values greater than 9999 meters
  • Modified default map trails to appear as dashed red lines
  • Fixed potential issue with screenshot color reproduction
  • Changes made from version 3.00 to 3.40:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Added Garmin Spanner mode to GPSMAP 78, GPSMAP 78s, and GPSMAP 78sc devices
  • Fixed issue with multilingual custom POI files
  • Fixed issue with setting proximity alerts. The unit of measure can be changed by entering the 'Proximity Alarms' page, pressing the 'Menu' key, and selecting 'Change Units'

Hinweise beachten: Garmin

Dakota Software Versionen 4.70, 4.90

  • Changes made from version 4.70 to 4.90:
  • Added Photo Viewer application (go to Setup -> Main Menu to add to the current profile)
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Updated the Geocaching – Nearest dashboard
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue that could cause some geocaches to not import
  • Fixed issue with track log recording while using the stopwatch
  • Modified default map trails to appear as dashed red lines
  • Changes made from version 4.60 to 4.70:
  • Fixed issue introduced in 4.60 where raster maps would be drawn as fully transparent (this issue affected BirdsEye™, Garmin Custom Maps, and Garmin GB Discoverer™ maps)
  • Changes made from version 4.30 to 4.60:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Fixed issue with multilingual custom POI files

Hinweise beachten: Garmin

eTrex 10 Software Version 2.40, 2.50

  • Changes made from version 2.40 to 2.50:
  • Improved support for Bulgarian
  • Added project waypoint to waypoint page option menu
  • Fixed issue displaying location in large data fields for certain position formats
  • Changes made from version 2.20 to 2.40:
  • Fixed issue where location large data fields draw incorrectly

eTrex 20/30 Software Versionen 2.40, 2.50

  • Changes made from version 2.40 to 2.50:
  • Fixed issue where project waypoint feature would only work once per power cycle.
  • Changes made from version 2.30 to 2.40:
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Improved behavior on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue where the progress bar would not display any progress when importing waypoints, tracks, routes, and geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue with track log recording while using the stopwatch
  • Fixed potential shutdown while scrolling through Garmin Connect photos
  • Fixed minor graphical issue with the backlight slider on the status page
  • Modified default map trails to appear as dashed red lines
Aktuelle Garmin Updates: Montana, Oregon 450/550, GPSmap 62/78, Dakota, eTrex 10/20/30 was last modified: Juli 23rd, 2017 by Joachim Bardua

Pin It on Pinterest

Share This