Garmin Updates: Software-/Firmware-Updates für viele Garmin Outdoor-GPS-Handgeräte, Outdoor-Uhren, GPS-Sportuhren und GPS-Fahrradcomputer in einer Übersicht und zum Download – inklusive Changelog. So erhält man eine Übersicht was wann geändert wurde und kann die einzelnen Versionen herunterladen!.

Garmin Dakota 10/20

Garmin Dakota 10/20

Garmin Dakota 10 (Bild: Garmin)

Garmin Dakota 10 (Bild: Garmin)

Dakota Software Versionen 4.70, 4.90, 5.10, 5.20, 5.30, 5.40, 5.50, 5.60, 5.70, 5.80

  • Version: 5.80
  • Datum: 09.10.2013
  • Installation: WebUpdater/Garmin Express
  • Download: Dakota_WebUpdater__580.gcd
  • Changes made from version 5.70 to 5.80:
  • Improved pairing behavior with cadence sensors (Dakota 20)
  • Fixed possible shutdown when using the Geocaching – Active dashboard
  • Version: 5.70
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 5.60 to 5.70:
  • Added support for VIRB Remote (Dakota 20). Setup > Main Menu to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Version: 5.60
  • Datum: 22.01.2013
  • Installation: WebUpdater
  • Changes made from version 5.50 to 5.60:
  • Fixed shutdown that could occur when using elevation plot while in auto-route navigation.
  • Fixed date for marked MOB waypoints.
  • Fixed issue writing correct temperature data to track logs.
  • Version: 5.50
  • Datum: 20.09.2012
  • Installation: WebUpdater
  • Changes made from version 5.40 to 5.50:
  • Fixed inability to edit archived tracks.
  • Fixed potential issue with reporting tempe temperature data.
  • Improved map drawing at low zoom levels.
  • Version: 5.40
  • Datum: 14.09.2012
  • Installation: WebUpdater
  • Changes made from version 5.30 to 5.40:
  • Fix potential system hang or crash when powering on.
  • Fixed Photo Viewer photo rotation for Dakota 20.
  • Fixed incorrect display of 'Memory Full' error message associated with the loading of particular map sets.
  • Version: 5.30
  • Datum: 29.08.2012
  • Installation: WebUpdater
  • Changes made from version 5.20 to 5.30:
  • Added Adventure support with latest version of BaseCamp. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
  • Added support for new tempe sensor. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
  • Changes made from version 5.10 to 5.20:
  • Improved GPS response at low speeds
  • Changes made from version 4.90 to 5.10:
  • Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
  • Fixed potential naming issues with imported routes from BaseCamp
  • Fixed issue with 'Hut' point type in TOPO Australia & New Zealand maps
  • Fixed issue with reviewing BlueChart® g2 depth points from the map page
  • Changes made from version 4.70 to 4.90:
  • Added Photo Viewer application (go to Setup -> Main Menu to add to the current profile)
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Updated the Geocaching – Nearest dashboard
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue that could cause some geocaches to not import
  • Fixed issue with track log recording while using the stopwatch
  • Modified default map trails to appear as dashed red lines
  • Changes made from version 4.60 to 4.70:
  • Fixed issue introduced in 4.60 where raster maps would be drawn as fully transparent (this issue affected BirdsEye™, Garmin Custom Maps, and Garmin GB Discoverer™ maps)
  • Changes made from version 4.30 to 4.60:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Fixed issue with multilingual custom POI files
Garmin eTrex 10

Garmin eTrex 10

Garmin eTrex 10 (Bild: Garmin)

Garmin eTrex 10 (Bild: Garmin)

eTrex 10 Software Version 2.40, 2.50, 2.60, 2.70, 2.90, 3.10, 3.20

  • Version: 3.20
  • Datum: 27.09.2013
  • Installation: WebUpdater
  • Download: eTrex10_Webupdater__320.gcd
  • Changes made from version 3.10 to 3.20:
  • Added confirmation of initial language selection
  • Fixed display of geocache coordinates with non-default map datum
  • Version: 3.10
  • Datum: 09.07.2013
  • Installation: WebUpdater
  • Changes made from version 2.90 to 3.10:
  • Improved ability to clear unit settings on power up: now only requires menu key and enter key to be held when powering the unit on
  • Improved load times for geocache descriptions
  • Fixed issue with reviewing individual route points from the Route Planner application
  • Fixed issue with displaying tracks on the map after performing an area calculation
  • Version: 2.90
  • Datum: 03.10.2012
  • Installation: WebUpdater
  • Changes made from version 2.70 to 2.90::
  • Fixed cause of a warning message when device is ejected from a PC.
  • Changes made from version 2.60 to 2.70:
  • Fixed issues with Farsi language
  • Changes from version 2.50 to version 2.60:
  • Added marine colors mode
  • Improved GPS response at low speeds
  • Fixed issue with altitude values in track logs
  • Fixed issue with track log naming when using BaseCamp
  • Fixed issue with compass CDI pointer
  • Fixed issue with distance units in geocache dashboard
  • Changes made from version 2.40 to 2.50:
  • Improved support for Bulgarian
  • Added project waypoint to waypoint page option menu
  • Fixed issue displaying location in large data fields for certain position formats
  • Changes made from version 2.20 to 2.40:
  • Fixed issue where location large data fields draw incorrectly
Garmin eTrex 20/30

Garmin eTrex 20/30

Garmin eTrex 30 (Bild: Garmin)

Garmin eTrex 30 (Bild: Garmin)

eTrex 20/30 Software Versionen 2.40, 2.50, 2.60, 2.61 Beta, 2.70, 2.71 Beta, 2.73 Beta, 2.80, 2.87 Beta, 2.90, 3.00, 3.10, 3.20, 3.30, 3.40, 3.60, 3.70, 3.80, 3.90, 4.00, 4.10, 4.20, 4.30

  • Version: 4.30
  • Datum: 14.07.2015
  • Installation: Garmin Express
  • Download: eTrex20_30_Webupdater__430.gcd
  • Changes made from version 4.20 to 4.30:
  • Improved 'Save Portion' track feature. When saving a portion, the device now remembers that position in the track log so it can be used as a track segment for future portion saving.
  • Fixed possible erroneous track point on power on.
  • Fixed formatting issue with certain map names in the map information list.
  • Version: 4.20
  • Datum: 21.01.2015
  • Installation: Garmin Express
  • Changes made from version 4.10 to 4.20:
  • Fixed several track distance statistic issues
  • Version: 4.10
  • Datum: 15.10.2014
  • Installation: Garmin Express
  • Changes made from version 4.00 to 4.10:
  • Fixed possible issue where BirdsEye satellite imagery would be permanently disabled after booting
  • Version: 4.00
  • Installation: Garmin Express
  • Changes made from version 3.90 to 4.00:
  • Improved cartography support (Garmin Hunt View maps)
  • Improved boot time when a large amount of BirdsEye satellite imagery is present
  • Improved pairing behavior with cadence sensors (eTrex 30 devices)
  • Fixed possible issue with waypoint ordering when sorting method is set to 'Nearest'
  • Version: 3.90
  • Datum: 10.07.2014
  • Installation: Garmin Express
  • Changes made from version 3.80 to 3.90:
  • Fixed issue with power off pressure trending (eTrex 30 devices).
  • Version: 3.80
  • Datum: 19.06.2014
  • Installation: Garmin Express
  • Changes made from version 3.70 to 3.80:
  • Fixed issue with barometer when auto calibration is turned off.
  • Fixed missing ascent, descent, and elevation statistics when reviewing certain tracks.
  • Fixed possible shutdown when displaying the option menu in Czech.
  • Version: 3.70
  • Datum: 25.03.2014
  • Installation: Garmin Express
  • Changes made from version 3.60 to 3.70:
  • Improved total ascent and total descent calculations
  • Improved average ascent, average descent, and vertical speed data fields
  • Version: 3.60
  • Datum: 18.02.2014
  • Installation: Garmin Express
  • Changes made from version 3.40 to 3.60:
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Version: 3.40
  • Datum: 21.10.2013
  • Installation: WebUpdater
  • Changes made from version 3.20 to 3.40:
  • Added confirmation of initial language selection
  • Fixed issue with saving the 'lock on road' setting across a power cycle
  • Version: 3.30
  • Datum: 27.09.2013
  • Installation: WebUpdater
  • Changes made from version 3.20 to 3.30:
  • Added confirmation of initial language selection
  • Fixed issue with saving the 'lock on road' setting across a power cycle
  • Version: 3.20
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 3.10 to 3.20:
  • Added support for VIRB Remote (eTrex 30). Main Menu > MENU Key > Change Item Order to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Fixed issue with route calculations always avoiding seasonally closed roads
  • Fixed possible issue when missing a turn while using the Active Route application
  • Version: 3.10
  • Datum: 09.07.2013
  • Installation: WebUpdater
  • Changes made from version 3.00 to 3.10:
  • Fixed issue with incorrect letter capitalization of certain map points
  • Fixed issue where wirelessly transmitting a geocache to another device would result in an error message when trying to view the received geocache in BaseCamp
  • Fixed potential issue with city searching
  • Version: 3.00
  • Datum: 11.04.2013
  • Installation: WebUpdater
  • Changes made from version 2.90 to 3.00:
  • Fixed several issues with sorting photos in the photo viewer application.
  • Fixed issue with prompted routing.
  • Fixed issue with saving a track’s ’show on map' status across a power cycle.
  • Fixed issue with displaying tracks on the map after performing an area calculation.
  • Fixed issue with BirdsEye imagery’s status not being saved to each profile.
  • Fixed issue with tempe sensor’s status not being saved to each profile (eTrex 30 devices).
  • Fixed potential shutdown when viewing certain tracks or routes in German or Russian.
  • Fixed possible issue with reviewing a track’s information.
  • Fixed possible issue with searching for an address in cities with extremely long names.
  • Version: 2.90
  • Datum: 25.02.2013
  • Installation: WebUpdater
  • Changes made from version 2.80 to 2.90:
  • Added Adventure support with latest version of BaseCamp. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
  • Added support for new tempe sensor on eTrex 30 devices. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
  • Improved accuracy of compass calibration on eTrex 30 devices. A new manual compass calibration is required (Setup > Heading > Calibrate Compass).
  • Improved map drawing at low zoom levels.
  • Improved load times for geocache descriptions.
  • Improved Ascent and Descent calculations.
  • Fixed issue with preserving routes imported from BaseCamp (identical maps required).
  • Fixed issue with picture rotation when using the photo viewer on eTrex 30 devices.
  • Fixed possible error message when disconnecting the device from a computer.
  • Fixed possible issue with viewing geocache descriptions in night mode.

 

  • Version: 2.87 Beta
  • Datum: 09.10.2012
  • Installation: Download
  • Changes made from version 2.80 to 2.87:
  • Added Adventure support with latest version of BaseCamp.
  • Added support for new tempe sensor on eTrex 30 devices
  • Improved accuracy of compass calibration on eTrex 30 devices. A new manual compass calibration is required.
  • Improved map drawing at low zoom levels.
  • Improved load times for geocache descriptions.
  • Fixed issue with preserving routes imported from BaseCamp (identical maps required).
  • Fixed issue with picture rotation when using the photo viewer on eTrex 30 devices.
  • Fixed possible error message when disconnecting the device from a computer.

 

  • Version: 2.80
  • Datum: 07.06.2012
  • Installation: WebUpdater
  • Changes made from version 2.70 to 2.80:
  • Added ability to sort waypoints alphabetically
  • Improved GPS response at low speeds
  • Improved ability to clear unit settings on power up: now only requires menu key and enter key to be held when powering the unit on
  • Improved size of roads drawn on map in 'automotive mode' orientation
  • Improved elevation data stored in track logs (etrex 30)
  • Fixed issue that was causing some devices to display a 'memory full' message followed by bad device behavior
  • Fixed issue with distance to destination data field
  • Fixed occasional overlapping of data fields in the elevation application
  • Fixed issue where waypoints and geocaches could be lost

 

  • Changes made from version 2.71 to 2.73 Beta:
  • Improved ability to clear unit settings on power up: now only requires menu key and enter key to be held when powering the unit on
  • Improved size of roads drawn on map in 'automotive mode' orientation
  • Fixed issue that was causing some devices to display a 'memory full' message followed by bad device behavior
  • Problems with this beta software may be reported to etrexBeta@garmin.com
  • Changes made from version 2.70 to 2.71 Beta:
  • Improved GPS response at low speeds
  • Improved elevation data stored in track logs (etrex 30)
  • Fixed issue with distance to destination data field
  • Fixed occasional overlapping of data fields in the elevation application
  • Problems with this beta software may be reported to etrexBeta@garmin.com

 

  • Changes made from version 2.60 to 2.70:
  • Improved GPS response at low speeds
  • Fixed issue that could occur when restoring map zoom level defaults
  • Fixed issue with track distance data field in stopwatch application

 

  • Changes made from version 2.60 to 2.61 Beta:
  • Improved GPS response at low speeds

 

  • Changes made from version 2.50 to 2.60:
  • Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
  • Fixed potential naming issues with imported routes from BaseCamp
  • Fixed issue with reviewing BlueChart® g2 depth points from the map page
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Changes made from version 2.40 to 2.50:
  • Fixed issue where project waypoint feature would only work once per power cycle.
  • Changes made from version 2.30 to 2.40:
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Improved behavior on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue where the progress bar would not display any progress when importing waypoints, tracks, routes, and geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue with track log recording while using the stopwatch
  • Fixed potential shutdown while scrolling through Garmin Connect photos
  • Fixed minor graphical issue with the backlight slider on the status page
  • Modified default map trails to appear as dashed red lines
Garmin eTrex 20x/30x

Garmin eTrex 20x/30x

eTrex 20x/30x Software Versionen 2.00, 2.10, 2.30, 2.40, 2.50

  • Version: 2.40, 2.50
  • Datum: 29.11.2016 (2.50)
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Improved display Battery Save operation.
  • Changes made from version 2.30 to 2.40:
  • Improved detection of USB connection to a PC.
  • Version: 2.30
  • Datum: 18.12.2015
  • Installation: Garmin Express
  • Download: eTrex20x_30x_Webupdater__230.gcd
  • Changes made from version 2.10 to 2.30:
  • Improved date select page.
  • Fixed issue with missing battery icon on dashboard.
  • Fixed issue with missing digit in direction number when panning the map.
  • Version: 2.10
  • Datum: 13.07.2015
  • Installation: Garmin Express
  • Changes made from version 2.00 to 2.10:
  • Added Screen Capture feature (Setup > Display > Screen Capture).
  • Improved 'Save Portion' track feature. When saving a portion, the device now remembers that position in the track log so it can be used as a track segment for future portion saving.
  • Fixed possible erroneous track point on power on.
  • Fixed formatting issue with certain map names in the map information list.
  • Version: 2.00
  • Datum: 13.05.2015
  • Installation: Garmin Express
Garmin eTrex 20/35 Touch

Garmin eTrex 20/35 Touch

eTrex Touch Software Versionen 2.20, 2.40, 2.50, 2.60, 2.70, 2.80, 2.90, 3.00, 3.10, 3.20, 3.40, 3.50, 3.60

Garmin eTrex 35 Touch (Bild: Garmin)

Garmin eTrex 35 Touch (Bild: Garmin)

  • Version: 3.60
  • Datum: 28.02.2017
  • Installation: Garmin Express
  • Changes made from version 3.50 to 3.60:
  • Fixed issue where auto-start setting would not work.
  • Fixed issue where activities would fail to sync to GCM after completing.
  • Fixed issue where touching the screen would wake up the unit when it was in battery save mode.
  • Version: 3.50
  • Datum: 01.12.2016
  • Installation: Garmin Express
  • Changes made from version 3.40 to 3.50:
  • Fixed intermittent issue where device was not recognized for mass storage when connected via USB.
  • Fixed ability to set custom name for FIT activities.
  • Fixed precision and other data issues with FIT activities.
  • Fixed potential waypoint distance mismatch on the Find page.
  • Fixed area units on the Track Review page.
  • Fixed possible shutdown on the Notifications page.
  • Fixed issue where the dashboard would flash when restoring defaults on the map page.
  • Fixed possible shutdown on the Review Map page.
  • Fixed possible shutdown on the Calendar page.
  • Fixed possible shutdown on the Proximity Alarms page.
  • Fixed possible shutdown on the Route List page.
  • Fixed possible freeze when deleting waypoints.
  • Version: 3.40
  • Datum: 22.07.2016
  • Installation: Garmin Express
  • Changes made from version 3.20 to 3.40:
  • Added support for optional MTP interface mode (Setup > System > USB Mode)
  • Version: 3.20
  • Datum: 11.05.2016
  • Installation: Garmin Express
  • Download: eTrexTouch25_35_Webupdater__320.gcd
  • Changes made from version 3.10 to 3.20:
  • Fixed possible issue causing European Topo Active maps to not update properly
  • Fixed issue with saved track stats precision
  • Version: 3.10
  • Datum: 06.04.2016
  • Installation: Garmin Express
  • Download: eTrexTouch25_35_Webupdater__310.gcd
  • Changes made from version 3.00 to 3.10:
  • Fixed issue where some large data fields would be blank
  • Fixed shutdown when setting manual safety shading setting
  • Version: 3.00
  • Datum: 08.01.2016
  • Installation: Garmin Express
  • Download: eTrexTouch25_35_Webupdater__300.gcd
  • Changes made from version 2.90 to 3.00:
  • Fixed possible shutdown when reviewing POIs on the map
  • Version: 2.90
  • Datum: 18.12.2015
  • Installation: Garmin Express
  • Changes made from version 2.80 to 2.90:
  • Fixed issue with incorrect map orientation and zoom level on map page.
  • Fixed issue with time display in night mode.
  • Fixed issue calorie calculation.
  • Fixed issue with speed display in data fields.
  • Fixed issue with importing adventures from SD cards.
  • Version: 2.80
  • Datum: 26.10.2015
  • Installation: Garmin Express
  • Changes made from version 2.70 to 2.80:
  • Fixed possible shutdown on certain keyboards
  • Fixed possible issue loading maps on power up
  • Version: 2.70
  • Datum: 30.09.2015
  • Installation: Garmin Express
  • Changes made from version 2.60 to 2.70:
  • Added ability to copy reverse for FIT activities.
  • Improved naming consistency for Tracks and Activities. Track is now used only in reference to GPX track files. Activity is used to refer to the current activity.
  • Improved foreign language keyboard layouts.
  • Improved display of right to left languages.
  • Improved panning on the altimeter page.
  • Improved separation of activity data and trip data.
  • Fixed possible issue that prevented geocache filters from working.
  • Fixed selected keyboard language to save through power cycle.
  • Fixed possible issue with Trip Time data field.
  • Version: 2.60
  • Datum: 26.08.2015
  • Installation: Garmin Express
  • Changes made from version 2.50 to 2.60:
  • Added turn information to map page during navigation
  • Added ability to customize auto pause threshold
  • Added option to restore the current profile to its default settings in Setup > Reset
  • Improved the Reset All Settings option in Setup > Reset. This option now resets all the profiles
  • Version: 2.50
  • Datum: 11.08.2015
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Improved the fit history application to work more like track manager
  • Improved main menu font in Classic Mode
  • Fixed potential shutdown when starting navigation
  • Fixed potential issue where a long list would show blank items after scrolling
  • Fixed potential issue where button would cover up review information
  • Fixed issue where WAAS setting would not save through a power cycle
  • Version: 2.40
  • Datum: 31.07.2015
  • Installation: Garmin Express
  • Version: 2.20
  • Datum: 10.07.2015
  • Installation: Garmin Express
Garmin GPSmap 62sc/stc

Garmin GPSmap 62sc/stc

GPSmap 62sc/stc Software Versionen: 2.90, 3.00, 3.10, 3.20, 3.30, 3.31 Beta, 3.40, 3.60, 3.70, 3.90, 4.00, 4.20, 4.30, 4.50, 4.60, 4.70, 4.80, 4.90, 5.10

  • Version: 5.10
  • Datum: 18.12.2015
  • Installation: Garmin Express
  • Download: GPSMAP62sc_62stc_WebUpdater__510.gcd
  • Changes made from version 4.90 to 5.10:
  • Fix possible route page crash.
  • Fix issue importing adventures from SD cards.
  • Version: 4.90
  • Datum: 14.07.2015
  • Installation: Garmin Express
  • Changes made from version 4.80 to 4.90:
  • Improved 'Save Portion' track feature. When saving a portion, the device now remembers that position in the track log so it can be used as a track segment for future portion saving.
  • Fixed possible erroneous track point on power on.
  • Fixed formatting issue with certain map names in the map information list.
  • Version: 4.80
  • Datum: 06.01.2015
  • Installation: Garmin Express
  • Changes made from version 4.70 to 4.80:
  • Fixed possible shutdown in when reviewing a route in Russian
  • Fixed several track distance statistic issues
  • Fixed waypoint distances being listed incorrectly for Waypoint Averaging
  • Version: 4.70
  • Datum: 15.10.2014
  • Installation: Garmin Express
  • Changes made from version 4.60 to 4.70:
  • Fixed possible issue where BirdsEye satellite imagery would be permanently disabled after booting
  • Version: 4.60
  • Installation: Garmin Express
  • Changes made from version 4.50 to 4.60:
  • Improved cartography support (Garmin Hunt View maps)
  • Improved boot time when a large amount of BirdsEye satellite imagery is present
  • Version: 4.50
  • Datum: 07.07.2014
  • Installation: Garmin Express
  • Changes made from version 4.30 to 4.50:
  • Fixed issue with barometer when auto calibration is turned off.
  • Fixed issue with power off pressure trending.
  • Fixed missing ascent, descent, and elevation statistics when reviewing certain tracks.
  • Fixed possible shutdown when displaying the option menu in Czech.
  • Version: 4.30
  • Datum: 24.03.2014
  • Installation: Garmin Express
  • Changes made from version 4.20 to 4.30:
  • Improved average ascent, average descent, and vertical speed data fields
  • Fixed potential shutdown when reviewing a route
  • Fixed potential issue when programming a chirp
  • Version: 4.20
  • Datum: 06.02.2014
  • Installation: Garmin Express
  • Changes made from version 4.00 to 4.20:
  • Added support for additional ActiveRouting cartography
  • Improved support for Garmin LakeVu HD cartography
  • Improved display of marine-specific lines in BlueChart g2 maps
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Version: 4.00
  • Datum: 30.09.2013
  • Installation: WebUpdater
  • Changes made from version 3.90 to 4.00:
  • Improved pairing behavior with cadence sensors
  • Fixed potential issue when logging a geocache as found
  • Version: 3.90
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 3.70 to 3.90:
  • Added support for VIRB Remote. Main Menu > MENU Key > Change Item Order to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Added Icelandic keyboard
  • Fixed issue with route calculations always avoiding seasonally closed roads
  • Fixed possible issue when missing a turn while using the Active Route application
  • Version: 3.70
  • Datum: 13.06.2013
  • Installation: WebUpdater
  • Changes made from version 3.60 to 3.70:
  • Added support for additional ActiveRouting cartography
  • Fixed issue with incorrect letter capitalization of certain map points
  • Fixed issue where wirelessly transmitting a geocache to another device would result in an error message when trying to view the received geocache in BaseCamp
  • Fixed potential issue when editing a waypoint’s position in certain languages
  • Version: 3.60
  • Datum: 13.03.2013
  • Installation: WebUpdater
  • Changes made from version 3.40 to 3.60:
  • Improved map performance in densely-populated urban areas.
  • Improved EXIF image orientation data in camera photos.
  • Improved EXIF compass heading data in camera photos.
  • Fixed trail searching when using multiple active routing maps.
  • Fixed issue with saving a track’s ’show on map' status across a power cycle.
  • Fixed issue with displaying tracks on the map after performing an area calculation.
  • Fixed possible issue with searching for an address in cities with extremely long names.
  • Fixed possible issue with viewing geocache descriptions in night mode.
  • Fixed minor graphical issue with certain data fields on the map.
  • Version: 3.40
  • Datum: 15.11.2012
  • Installation: WebUpdater
  • Changes made from version 3.30 to 3.40:
  • Added quick access to the geocaching options from the compass and map pages.
  • Added 'Geocache Start Page' option to geocache setup page (Setup -> Geocaches).
  • Improved ascent and descent calculations.
  • Fixed potential shutdown when searching for adventures.
  • Fixed issues with alphabetical sort from waypoint manager.
  • Fixed potential issues with geocaching dashboard.

 

  • Version: 3.31 Beta
  • Datum: 19.10.2012
  • Installation: Download
  • Changes made from version 4.50 to 4.52 Beta:
  • Added quick access to the geocaching options from the compass and map pages.
  • Added 'Geocache Start Page' option to geocache setup page (Setup -> Geocaches ).
  • Improved ascent and descent calculations.
  • Fixed potential shutdown when searching for adventures.
  • Fixed issues with alphabetical sort from waypoint manager.
  • Fixed potential issues with geocaching dashboard.
  • Issues with this beta software may be reported to 62-78Beta@garmin.com

 

  • Version: 3.30
  • Datum: 20.09.2012
  • Installation: WebUpdater
  • Changes made from version 3.20 to 3.30:
  • Improved map drawing at low zoom levels.
  • Fixed inability to edit archived tracks.
  • Fixed display of geocache coordinates with non-default map datum.
  • Fixed overlapping position text for right to left languages.
  • Fixed overlapping position text in data fields.
  • Fixed minor display issue when navigating to a waypoint, geocache, track, route, or photo that is part of an adventure.
  • Version: 3.20
  • Datum: 29.08.2012
  • Installation: WebUpdater
  • Changes made from version 3.10 to 3.20:
  • Added Adventure support with latest version of BaseCamp. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
  • Added support for new tempe sensor. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
  • Fixed Find Next Closest geocaching option when routing is set to Prompted.
  • Version: 3.10
  • Datum: 18.06.2012
  • Installation: WebUpdater <liAdded new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added ability to sort waypoints alphabetically
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Improved camera white balance
  • Fixed issue with preserving routes imported from BaseCamp (identical maps required)
  • Fixed issue where the map would sometimes not refresh when using the active route page
  • Fixed issue with the Glide Ratio data field
  • Fixed Spell Search in German
  • Fixed possible issue with Where To? > Address searching
  • Version: 3.00
  • Datum: 12.06.2012
  • Installation: WebUpdater
  • Changes made from version 2.80 to 3.00:
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added ability to sort waypoints alphabetically
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Improved camera white balance
  • Fixed issue with preserving routes imported from BaseCamp (identical maps required)
  • Fixed issue where the map would sometimes not refresh when using the active route page
  • Fixed issue with the Glide Ratio data field
  • Fixed Spell Search in German
  • Fixed possible issue with Where To? > Address searching
  • Version: 2.90
  • Datum: 25.05.2012
  • Installation: Download
  • Changes made from version 2.80 to 2.90:
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed issue with preserving routes imported from Basecamp (identical maps required)
  • Problems with this software may be reported to 62-78Beta@garmin.com
Garmin GPSmap 62/78

Garmin GPSmap 62/78(s/st)

Garmin GPSmap 62 (Bild: Garmin)

Garmin GPSmap 62s (Bild: Garmin)

GPSMAP 62/78(s/st) Software Versionen 3.40, 3.50, 3.60 Beta, 3.71 Beta, 3.80, 3.90 Beta, 4.03 Beta, 4.10, 4.20, 4.30, 4.40, 4.50, 4.52 Beta, 4.60, 4.80, 4.90, 5.0, 5.10, 5.30, 5.40, 5.60, 5.70, 5.80, 5.90, 6.10, 6.30, 6.70

  • Version: 6.70
  • Datum: 31.01.2017
  • Installation: Garmin Express
  • Changes made from version 6.30 to 6.70:
  • Added backup of critical data.
  • Fixed possible route crash.
  • Fixed adventures not importing from SD cards.
  • Version: 6.30
  • Datum: 14.07.2015
  • Installation: Garmin Express
  • Download: GPSMAP62_78_WebUpdater__630.gcd
  • Changes made from version 6.10 to 6.30:
  • Improved 'Save Portion' track feature. When saving a portion, the device now remembers that position in the track log so it can be used as a track segment for future portion saving.
  • Fixed possible erroneous track point on power on.
  • Fixed formatting issue with certain map names in the map information list.
  • Version: 6.10
  • Datum: 19.03.2015
  • Installation: Garmin Express
  • Changes made from version 5.90 to 6.10:
  • Fixed possible shutdown when scrolling through the waypoints list
  • Version: 5.90
  • Datum: 06.01.2015
  • Installation: Garmin Express
  • Changes made from version 5.80 to 5.90:
  • Fixed possible shutdown in when reviewing a route in Russian
  • Fixed several track distance statistic issues
  • Fixed waypoint distances being listed incorrectly for Waypoint Averaging
  • Version: 5.80
  • Datum: 15.10.2014
  • Installation: Garmin Express
  • Changes made from version 5.70 to 5.80:
  • Fixed possible issue where BirdsEye satellite imagery would be permanently disabled after booting
  • Version: 5.70
  • Datum: 26.09.2014
  • Installation: Garmin Express
  • Changes made from version 5.60 to 5.70:
  • Improved cartography support
  • Improved boot time when a large amount of BirdsEye satellite imagery is present
  • Version: 5.60
  • Datum: 08.07.2014
  • Installation: Garmin Express
  • Changes made from version 5.40 to 5.60:
  • Fixed issue with barometer when auto calibration is turned off (62s, 62st, 78s, 78sc models).
  • Fixed issue with power off pressure trending (62s, 62st, 78s, 78sc models).
  • Fixed missing ascent, descent, and elevation statistics when reviewing certain tracks.
  • Fixed possible shutdown when displaying the option menu in Czech.
  • Version: 5.40
  • Datum: 24.03.2014
  • Installation: Garmin Express
  • Changes made from version 5.30 to 5.40:
  • Improved average ascent, average descent, and vertical speed data fields
  • Fixed potential shutdown when reviewing a route
  • Fixed potential issue when programming a chirp (62s, 62st, 78s, 78sc models)
  • Version: 5.30
  • Datum: 06.02.2014
  • Installation: Garmin Express
  • Changes made from version 5.10 to 5.30:
  • Added support for additional ActiveRouting cartography
  • Improved support for Garmin LakeVu HD cartography
  • Improved display of marine-specific lines in BlueChart g2 maps
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Version: 5.10
  • Datum: 30.09.2013
  • Installation: WebUpdater
  • Changes made from version 5.00 to 5.10:
  • Improved pairing behavior with cadence sensors (62s, 62st, 78s, 78sc models)
  • Fixed potential issue when logging a geocache as found
  • Version: 5.0
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 4.90 to 5.00:
  • Added support for VIRB Remote (62s, 62st, 78s, 78sc models). Main Menu > MENU Key > Change Item Order to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Added Icelandic keyboard
  • Fixed issue with route calculations always avoiding seasonally closed roads
  • Fixed possible issue when missing a turn while using the Active Route application
  • Version: 4.90
  • Datum: 13.06.2013
  • Installation: WebUpdater
  • Changes made from version 4.80 to 4.90:
  • Added support for additional ActiveRouting cartography
  • Fixed issue with incorrect letter capitalization of certain map points
  • Fixed issue where wirelessly transmitting a geocache to another device would result in an error message when trying to view the received geocache in BaseCamp (62s, 62st, 78s, 78sc)
  • Version: 4.80
  • Datum: 13.03.2013
  • Installation: WebUpdater
  • Changes made from version 4.60 to 4.80:
  • Improved map performance in densely-populated urban areas.
  • Fixed trail searching when using multiple active routing maps.
  • Fixed issue with saving a track’s ’show on map' status across a power cycle.
  • Fixed issue with displaying tracks on the map after performing an area calculation.
  • Fixed possible issue with searching for an address in cities with extremely long names.
  • Fixed possible issue with viewing geocache descriptions in night mode.
  • Fixed minor graphical issue with certain data fields on the map.
  • Version: 4.60
  • Datum: 15.11.2012
  • Installation: WebUpdater
  • Changes made from version 4.50 to 4.60:
  • Added quick access to the geocaching options from the compass and map pages.
  • Added 'Geocache Start Page' option to geocache setup page (Setup -> Geocaches ).
  • Improved ascent and descent calculations.
  • Fixed potential shutdown when searching for adventures.
  • Fixed issues with alphabetical sort from waypoint manager.
  • Fixed potential issues with geocaching dashboard.

 

  • Version: 4.52 beta
  • Datum: 19.10.2012
  • Installation: Download
  • Changes made from version 4.50 to 4.52 Beta:
  • Added quick access to the geocaching options from the compass and map pages.
  • Added 'Geocache Start Page' option to geocache setup page (Setup -> Geocaches ).
  • Improved ascent and descent calculations.
  • Fixed potential shutdown when searching for adventures.
  • Fixed issues with alphabetical sort from waypoint manager.
  • Fixed potential issues with geocaching dashboard.
  • Issues with this beta software may be reported to 62-78Beta@garmin.com

 

  • Version: 4.50
  • Datum: 20.09.2012
  • Installation: WebUpdater
  • Changes made from version 4.40 to 4.50:
  • Improved map drawing at low zoom levels.
  • Fixed inability to edit archived tracks.
  • Fixed ability to use NMEA depth for waypoints and tracks.
  • Fixed display of geocache coordinates with non-default map datum.
  • Fixed overlapping position text for right to left languages.
  • Fixed overlapping position text in data fields.
  • Version: 4.40
  • Datum: 30.08.2012
  • Installation: WebUpdater
  • Changes made from version 4.30 to 4.40:
  • Added Adventure support with latest version of BaseCamp. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
  • Added support for new tempe sensor. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
  • Version: 4.30
  • Datum: 18.06.2012
  • Installation: WebUpdater
  • Changes made from version 3.90 to 4.30:
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added ability to sort waypoints alphabetically
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed issue with preserving routes imported from BaseCamp (identical maps required)
  • Fixed issue where the map would sometimes not refresh when using the active route page
  • Fixed issue with the Glide Ratio data field
  • Fixed Spell Search in German
  • Fixed possible issue with Where To? > Address searching
  • Version: 4.20
  • Datum: 12.06.2012
  • Installation: WebUpdater
  • Changes made from version 3.90 to 4.20:
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added ability to sort waypoints alphabetically
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed issue with preserving routes imported from BaseCamp (identical maps required)
  • Fixed issue where the map would sometimes not refresh when using the active route page
  • Fixed issue with the Glide Ratio data field
  • Fixed Spell Search in German
  • Fixed possible issue with Where To? > Address searching
  • Version: 4.10
  • Datum: 25.05.2012
  • Installation: Download
  • Changes made from version 3.90 to 4.10:
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed Spell Search in German
  • Problems with this software may be reported to 62-78Beta@garmin.com

 

  • Changes made from version 3.90 Beta to 4.03 Beta:
  • Added new route activity types
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed issue with preserving routes imported from Basecamp (identical maps required)
  • Fixed Spell Search in German
  • Problems with this beta software may be reported to 62-78Beta@garmin.com
  • Changes made from version 3.80 to 3.90 Beta:
  • Added symbol filtering to FIND > Waypoints and Waypoint Manager
  • Improved GPS response at low speeds
  • Fixed daylight saving time issue in Sun and Moon application
  • Fixed issue that could occur when restoring map zoom level defaults
  • Fixed issues with support for Canada BlueChart g2 maps

 

  • Changes made from version 3.60 to 3.80:
  • Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
  • Improved elevation data stored in track logs
  • Fixed issue with 'Hut' point type in TOPO Australia & New Zealand maps
  • Fixed issue with magnetic north offset when projecting a waypoint

 

  • Changes made from version 3.60 Beta to 3.71 Beta:
  • Improved elevation data stored in track logs
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Problems with the software may be reported to 62-78Beta@garmin.com

 

  • Changes made from version 3.50 to 3.60:
  • Fixed an issue with the reporting of pressure from the barometric altimeter (GPSMAP 62s/62st/78s/78sc)
  • Changes made from version 3.40 to 3.50:
  • Added Photo Viewer application
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed bug that could cause some geocaches to not import
  • Fixed issue with track log recording while using the stopwatch
  • Fixed issue with the anchor drag alarm
  • Fixed issue with total ascent and total descent fields not displaying values greater than 9999 meters
  • Modified default map trails to appear as dashed red lines
  • Fixed potential issue with screenshot color reproduction
  • Changes made from version 3.00 to 3.40:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Added Garmin Spanner mode to GPSMAP 78, GPSMAP 78s, and GPSMAP 78sc devices
  • Fixed issue with multilingual custom POI files
  • Fixed issue with setting proximity alerts. The unit of measure can be changed by entering the 'Proximity Alarms' page, pressing the 'Menu' key, and selecting 'Change Units'
Garmin GPSmap 64/64s/64st

Garmin GPSmap 64/64s/64st

Garmin GPSmap 64 (Bild: Garmin)

Garmin GPSmap 64 (Bild: Garmin)

GPSmap 64 Software Versionen: 2.40, 2.50, 2.60, 2.80, 2.90, 3.00, 3.10, 3.20, 3.40, 3.70, 3.90, 4.00, 4.20, 4.30, 4.50, 4.70

  • Version: 4.70
  • Datum: 28.02.2017
  • Installation: Garmin Express
  • Changes made from version 4.50 to 4.70:
  • Fixed issue where the compass wouldn’t work when the bike sensor was on.
  • Fixed issue where track portions were being saved incorrectly.
  • Version: 4.50
  • Datum: 22.07.2016
  • Installation: Garmin Express
  • Changes made from version 4.30 to 4.50:
  • Added support for optional MTP interface mode (Setup > System > USB Mode)
  • Version: 4.30
  • Datum: 06.04.2016
  • Installation: Garmin Express
  • Download: GPSMAP64_WebUpdater__430.gcd
  • Changes made from version 4.20 to 4.30:
  • Added support for Bike Speed Sensor
  • Added support for Bike Cadence Sensor
  • Version: 4.20
  • Datum: 18.12.2015
  • Installation: Garmin Express
  • Download: GPSMAP64_WebUpdater__420.gcd
  • Changes made from version 4.00 to 4.20:
  • Improved Bluetooth pairing.
  • Fixed importing adventures from SD cards.
  • Fixed possible routing crash.
  • Version: 4.00
  • Datum: 14.07.2015
  • Installation: Garmin Express
  • Changes made from version 3.90 to 4.00:
  • Improved 'Save Portion' track feature. When saving a portion, the device now remembers that position in the track log so it can be used as a track segment for future portion saving.
  • Fixed possible erroneous track point on power on.
  • Fixed formatting issue with certain map names in the map information list.
  • Fixed output of SNR in $GPGSV NMEA sentence.
  • Version: 3.90
  • Datum: 23.04.2015
  • Installation: Garmin Express
  • Changes made from version 3.70 to 3.90:
  • Improved map load times
  • Fixed possible shutdown when scrolling through the waypoints list
  • Version: 3.70
  • Datum: 02.02.2015
  • Installation: Garmin Express
  • Changes made from version 3.40 to 3.70:
  • Improved 3-axis compass performance
  • Version: 3.40
  • Datum: 02.01.2015
  • Installation: Garmin Express
  • Changes made from version 3.20 to 3.40:
  • Fixed shutdown on charging page when PAGE or QUIT buttons are pressed
  • Fixed possible shutdown in when reviewing a route in Russian
  • Fixed device not reconnecting to a tempe wireless temperature sensor across a power cycle
  • Fixed several track distance statistic issues
  • Fixed waypoint distances being listed incorrectly for Waypoint Averaging
  • Version: 3.20
  • Datum: 16.09.2014
  • Installation: Garmin Express
  • Changes made from version 3.10 to 3.20:
  • Improved cartography support
  • Improved boot time when a large amount of BirdsEye satellite imagery is present
  • Version: 3.10
  • Datum: 11.07.2014
  • Installation: Garmin Express
  • Changes made from version 3.00 to 3.10:
  • Fixed issue with power off pressure trending (64s/64st models).
  • Version: 3.00
  • Datum: 21.06.2014
  • Installation: Garmin Express
  • Changes made from version 2.90 to 3.00:
  • Fixed issue with geocaching 'Next Stage' feature.
  • Fixed potential issue with geocache filters.
  • Version: 2.90
  • Datum: 19.06.2014
  • Installation: Garmin Express
  • Changes made from version 2.80 to 2.90:
  • Added support for Android version of Garmin Connect Mobile app (for LiveTrack).
  • Improved 3-axis compass performance.
  • Fixed missing 'AA Battery Type' option when not using the optional rechargeable battery pack in Setup > System. This only affected the standard (yellow) GPSMAP 64 model.
  • Fixed issue with barometer when auto calibration is turned off.
  • Fixed missing ascent, descent, and elevation statistics when reviewing certain tracks.
  • Fixed possible shutdown when using custom waypoint symbols.
  • Fixed possible shutdown when displaying the option menu in Czech.
  • Version: 2.80
  • Datum: 28.05.2014
  • Installation: Garmin Express
  • Changes made from version 2.60 to 2.80:
  • Fixed freeze when 'Geocaches' is present in the page sequence
  • Version: 2.60
  • Datum: 28.03.2014
  • Installation: Garmin Express
  • Changes made from version 2.50 to 2.60:
  • Fixed issue causing possible slow boot times
  • Version: 2.50
  • Datum: 24.03.2014
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Improved average ascent and average descent data fields
  • Improved vertical speed and grade data fields
  • Improved transfer speed between device and BaseCamp Mobile or Garmin Connect Mobile (64s/64st models)
  • Fixed potential issue when programming a chirp (64s/64st models)
  • Fixed potential shutdown when using smart notifications
  • Fixed displaying duplicate smart notifications in certain instances
  • Version: 2.40
  • Datum: 18.02.2014
  • Installation: Garmin Express
  • Changes made from version 2.20 to 2.40:
  • Added support for additional ActiveRouting cartography
  • Improved display of marine-specific lines in BlueChart g2 maps
Garmin Montana 600/650

Garmin Montana 600/650

Garmin Montana 600 (Bild: Garmin)

Garmin Montana 600 (Bild: Garmin)

Montana Software Versionen 3.10, 3.20, 3.30, 3.40, 3.50, 3.60, 3.63 Beta, 3.64 Beta, 3.66 Beta, 3.67 Beta, , 3.68 Beta, 3.70, 3.80, 3.90, 3.93 Beta, 3.94 Beta, 3.96 Beta, 3.97 Beta, 3.98 Beta, 3.99 Beta, 4.01 Beta, 4.02 Beta, 4.03 Beta, 4.04 Beta, 4.10, 4.20, 4.40, 4.50, 4.60, 4.70, 4.80, 4.90, 5.0, 5.10, 5.20, 5.30, 5.40, 5.60, 5.70, 5.90, 6.10, 6.20, 6.40, 6.50, 6.80, 7.00, 7.10, 7.20

  • Version:7.20
  • Datum: 28.02.2017
  • Installation: Garmin Express
  • Changes made from version 7.10 to 7.20:
  • Fixed issue where touching the screen would wake up the unit when it was in battery save mode.
  • Fixed possible freeze when the unit was in mass storage mode and then unplugged.
  • Version:7.10
  • Datum: 17.11.2016
  • Installation: Garmin Express
  • Changes made from version 7.00 to 7.10:
  • Fixed issue where waypoint time would show 'am' for waypoints marked as 12:xx pm.
  • Fixed issue where the trip computer total time was not being reset when the 'reset both track and trip data' option was selected.
  • Fixed intermittent issue where device was not recognized for mass storage when connected via USB.
  • Version:7.00
  • Datum: 22.07.2016
  • Installation: Garmin Express
  • Changes made from version 6.80 to 7.00:
  • Added support for optional MTP interface mode (Setup > System > Interface)
  • Version: 6.80
  • Datum: 20.11.2015
  • Installation: Garmin Express
  • Download: Montana_WebUpdater__680.gcd
  • Changes made from version 6.50 to 6.80:
  • Added ETRS89 datum
  • Fixed possible issue with viewing a route on the map
  • Fixed possible incorrect geocache terrain score on map
  • Fixed date field in certain languages
  • Version: 6.50
  • Datum: 15.07.2015
  • Installation: Garmin Express
  • Changes made from version 6.40 to 6.50:
  • Improved 'Save Portion' track feature. When saving a portion, the device now remembers that position in the track log so it can be used as a track segment for future portion saving.
  • Fixed possible erroneous track point on power on.
  • Version: 6.40
  • Datum: 06.01.2015
  • Installation: Garmin Express
  • Changes made from version 6.20 to 6.40:
  • Fixed several track distance statistic issues
  • Fixed waypoint distances being listed incorrectly for Waypoint Averaging
  • Fixed certain alarm tones using the internal beeper instead of using the automotive mount speaker (when present)
  • Version: 6.20
  • Datum: 19.09.14
  • Installation: Garmin Express
  • Changes made from version 6.10 to 6.20:
  • Improved cartography support
  • Improved boot time when a large amount of BirdsEye satellite imagery is present
  • Version: 6.10
  • Datum: 07.07.14
  • Installation: Garmin Express
  • Changes made from version 5.90 to 6.10:
  • Fixed issue with barometer when auto calibration is turned off.
  • Fixed missing ascent, descent, and elevation statistics when reviewing certain tracks.
  • Fixed issue with power off pressure trending.
  • Fixed issue with geocaching filter when the OpenCaching.com geocaching style is selected.
  • Version: 5.90
  • Datum: 07.04.14
  • Installation: Garmin Express
  • Changes made from version 5.70 to 5.90:
  • Improved average ascent and average descent data fields
  • Improved vertical speed and grade data fields
  • Version: 5.70
  • Datum: 07.02.14
  • Installation: Garmin Express
  • Changes made from version 5.40 to 5.70:
  • Added support for additional ActiveRouting cartography
  • Improved display of marine-specific lines in BlueChart g2 maps
  • Improved boot time when large amounts of photos are present
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Fixed possible issue with +/- buttons when using Sight N' Go
  • Fixed possible issue with the Distance to Destination data field in nuvi mode
  • Version: 5.60 Von Garmin zurückgezogen!
  • Datum: 30.01.14
  • Installation: Garmin Express
  • Changes made from version 5.40 to 5.60:
  • Added support for additional ActiveRouting cartography
  • Improved display of marine-specific lines in BlueChart g2 maps
  • Improved boot time when large amounts of photos are present
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Fixed possible issue with +/- buttons when using Sight N' Go
  • Fixed possible issue with the Distance to Destination data field in nuvi mode
  • Version: 5.40
  • Datum: 25.09.2013
  • Installation: WebUpdater
  • Changes made from version 5.30 to 5.40:
  • Improved pairing behavior with cadence sensors
  • Fixed Latvian keyboard
  • Fixed issue with reordering the list of profiles in Setup > Profiles
  • Fixed possible shutdown when viewing the Elevation Plot in landscape orientation
  • Fixed possible shutdown when selecting a route in the Route Planner application
  • Fixed possible shutdown when exiting the Photo Viewer application
  • Fixed possible issue with the Geocaching dashboard
  • Version: 5.30
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 5.20 to 5.30:
  • Added support for VIRB Remote. Setup > Main Menu to add. See TrailTech (//garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Improved guidance text on the map when using certain maps
  • Fixed issue with route calculations always avoiding seasonally closed roads
  • Version: 5.20
  • Datum: 12.07.2013
  • Installation: WebUpdater
  • Changes made from version 5.10 to 5.20:
  • Added Icelandic keyboard
  • Version: 5.10
  • Datum: 13.06.2013
  • Installation: WebUpdater
  • Changes made from version 5.00 to 5.10:
  • Added support for additional ActiveRouting cartography
  • Improved support for Garmin LakeVu HD cartography
  • Fixed issue with incorrect letter capitalization of certain map points
  • Fixed issue where wirelessly transmitting a geocache to another device would result in an error message when trying to view the received geocache in BaseCamp
  • Version: 5.0
  • Datum: 30.05.2013
  • Installation: WebUpdater
  • Changes made from version 4.90 to 5.00:
  • Added support for additional ActiveRouting cartography
  • Fixed uppercase Czech keyboard in landscape orientation
  • Fixed 'Low Battery' message when using AA batteries and disconnecting from external power
  • Fixed issue with waypoint deletion when results are filtered
  • Fixed issue with using shortcuts to change routing activities
  • Fixed issue with using shortcuts to change map statuses
  • Fixed issue with certain shortcuts remaining highlighted after being selected
  • Fixed issue with repeatedly changing the vehicle in map setup
  • Fixed possible issue with 'Track Distance' data field not being reset
  • Version: 4.90
  • Datum: 10.04.2013
  • Installation: WebUpdater
  • Changes made from version 4.80 to 4.90:
  • Fixed issue with a data field in nuvi mode while navigating with the device in landscape orientation.
  • Fixed issue with overlapping text when reviewing certain geocaches.
  • Version: 4.80
  • Datum: 09.04.2013
  • Installation: WebUpdater
  • Changes made from version 4.70 to 4.80:
  • Improved EXIF compass heading data in camera photos (650 and 650t models).
  • Fixed issue with changing profiles when the altimeter dashboard is active on the main menu.
  • Fixed issue with certain characters on the Czech or Polish keyboards in landscape orientation.
  • Fixed issue with shortcuts that enable or disable maps remaining highlighted after being selected.
  • Fixed issue with displaying tracks on the map after performing an area calculation.
  • Fixed issue with saving a track’s ’show on map' status across a power cycle.
  • Fixed potential issue with renaming tracks or routes.
  • Fixed potential issue with viewing geocache descriptions in night mode.
  • Version: 4.70
  • Datum: 30.01.2013
  • Installation: WebUpdater
  • Changes made from version 4.60 to 4.70:
  • Improved Ascent and Descent calculation.
  • Improved map performance in densely-populated urban areas.
  • Improved EXIF image direction data in camera photos (650 and 650t models).
  • Fixed potential issue with 'External Power Only' automatic mount detection option. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/the-need-for-speed.html#MountDetection) for more information.
  • Fixed issue where default vehicle names and default background image names were not being translated.
  • Fixed issue with trip odometer where distance between two tracks would be incorrectly added to the total distance.
  • Fixed potential issue where waypoint averaging would not create a correct waypoint gpx file.
  • Fixed issue with distorted battery icon when on landscape charging page and when charge reaches 100%
  • Fixed potential issue with numerical keyboard in landscape orientation
  • Version: 4.60
  • Datum: 20.09.2012
  • Installation: WebUpdater
  • Changes made from version 4.50 to 4.60:
  • Improved map drawing at low zoom levels.
  • Fixed inability to edit archived tracks.
  • Fixed ability to use NMEA depth for waypoints and tracks.
  • Fixed display of geocache coordinates with non-default map datum.
  • Fixed position display on waypoint page.
  • Fixed overlapping position text for right to left languages.
  • Version: 4.50
  • Datum: 10.09.2012
  • Installation: WebUpdater
  • Changes made from version 4.40 to 4.50:
  • Fixed intermittent shutdown when pressing the menu button on the map.
  • Fixed vertical spacing and font of the location data field.
  • Version: 4.40
  • Datum: 30.08.2012
  • Installation: WebUpdater
  • Changes made from version 4.20 to 4.40:
  • Added Adventure support with latest version of BaseCamp. See TrailTech (//garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
  • Added support for new tempe sensor. See TrailTech (//garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
  • Added ability to view multicolored satellites on the Satellite page.
  • Added ability to delete multiple waypoints.
  • Added ability to clear the Recent Finds list.
  • Improved load times for geocache descriptions.
  • Version: 4.20
  • Datum: 12.06.2012
  • Installation: WebUpdater
  • Changes made from version 4.10 to 4.20
  • Added ability to sort waypoints alphabetically
  • Improved search speed in Where To? menus
  • Fixed review of individual route points through the Route Planner
  • Fixed issue with the Glide Ratio data field
  • Fixed occasional map display issue when using Topo Deutschland 2012 Pro or Garmin TransAlpin 2012 Pro
  • Version: 4.10
  • Datum: 25.05.2012
  • Installation: WebUpdater
  • Changes made from version 3.90 to 4.10
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added symbol filtering to Where To? > Waypoints and Waypoint Manager
  • Added ability to toggle map between Track Up and North Up by touching the North arrow
  • Added ability to set a via point while navigating a calculated route
  • Added ability to remove the red pin while panning the map
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Improved touch screen responsiveness
  • Improved font sizes for Arabic and Farsi languages
  • Improved camera white balance
  • Fixed issues with support for Canada BlueChart g2 maps
  • Fixed issue with NMEA
  • Fixed issue with track distance data field when track logging is off
  • Fixed issue with track log naming when using BaseCamp
  • Fixed issue with geocache visits in Calendar application
  • Fixed issue with charging indication when unit is fully charged
  • Fixed issues with map set selections across Profiles
  • Fixed issue where current geocache description review would reset to top after leaving page
  • Fixed issue with changing date on Tide reviews
  • Fixed issue where imported points from Garmin POI Loader would not alert user after a Profile change
  • Fixed potential shutdown caused by altimeter calibration
  • Fixed Where To? > Address searching
  • Fixed possible shutdown caused by the Small Data Fields dashboard
  • Fixed 'Go' button in chirp details
  • Fixed orientation change when viewing Help
  • Fixed shutdown caused by sorting Photo Viewer multiple times

 

  • Changes made from version 4.03 Beta to 4.04 Beta:
  • Fixed issue with WAAS correction data
  • Fixed issue with empty map list directly after power on
  • Fixed potential shutdown caused by altimeter calibration
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 4.02 Beta to 4.03 Beta:
  • Improved map draw speed
  • Fixed setup of Main Menu and Drawer
  • Fixed North Arrow touchable accuracy when using nüvi dashboard
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 4.01 beta to 4.02 beta:
  • Fixed issue where imported points from Garmin POI Loader would not alert user after a Profile change
  • Fixed issue with changing date on Tide reviews
  • Fixed issue where current geocache description review would reset to top after leaving page
  • Fixed issue with flashing Elevation Plot while following a track
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 3.99 to 4.01 Beta:
  • Fixed issues with map set selections across Profiles
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 3.98 to 3.99 Beta:
  • Improved touchable accuracy of red pin removal
  • Fixed issues with Direct Routing
  • Fixed routing behavior after changing Activity type during an active route
  • Fixed issue causing Routing Avoidance selections not to be saved
  • Fixed issues when disconnecting from mass storage
  • Fixed issues with map set selections across Profiles
  • Fixed issue causing 'Use' button to not display on the map
  • Fixed display of waypoint icons in Recent Finds list
  • Fixed issue with Favorites menu caused by changing Profiles and restarting unit
  • Fixed issue with main menu dashboard caused by changing Profiles via shortcut on main menu
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 3.97 to 3.98 Beta:
  • Added ability to remove the red pin while panning the map
  • Added ability to set a via point while navigating a calculated route
  • Added new route activity types
  • Improved GPS response at low speeds
  • Improved camera white balance
  • Improved Arabic fonts
  • Fixed issue with preserving routes imported from Basecamp (identical maps required)
  • Fixed Where To? > Address bug that would prevent finding an address
  • Fixed issue related to not ignoring first screen press after backlight times out
  • Fixed shutdown related to a shortcut that locks a specific orientation
  • Problems with this beta software may be reported to MontanaBeta@garmin.com

 

  • Changes made from version 3.96 to 3.97:
  • Fixed issue with Trip Computer setup
  • Fixed issue with North Arrow map orientation toggle
  • Fixed inability to select turn/guidance information on map while in nuvi mode and navigating
  • Fixed issue resulting in bad point information on the map
  • Fixed issue with reviewing a list of multiple points from the map
  • Fixed 'Go' button on chirp details page
  • Fixed issue with charging indication when unit is fully charged
  • Fixed issue with list controls incorrectly appearing enabled
  • Fixed Photo Viewer when language is set to Arabic
  • Fixed issue with 'lock on road' setting not saving during a power cycle
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 3.94 to 3.96:
  • Added ability to toggle map between Track Up and North Up by touching the North arrow
  • Improved ability to select the geocache photos button when reviewing a geocache
  • Fixed issue with viewing the Elevation/Distance plot when routing
  • Fixed issue with Go button not showing up on map when viewing certain Where To? points
  • Fixed issue causing a freeze when adding certain items to the Main Menu or Drawer
  • Fixed issue with help files shutting down the device
  • Fixed orientation change when viewing help
  • Fixed issue causing a freeze when configuring the power key
  • Fixed 'Go' button in chirp details
  • Fixed possible shutdown caused by the Small Data Fields dashboard
  • Fixed Where To? > Address searching
  • Fixed issues with spell searching: spell city, geocache name, etc.
  • Fixed point selection on the Elevation Plot
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 3.93 to 3.94:
  • Fixed issues causing crashes with 3.93 beta release
  • Fixed issue with geocache visits in calendar application
  • Problems with this beta software may be reported to MontanaBeta@garmin.com

 

  • Changes made from version 3.90 to 3.93 Beta:
  • Added symbol filtering to Where To? > Waypoints and Waypoint Manager
  • Improved GPS response at low speeds
  • Improved touch screen responsiveness
  • Improved font sizes for Arabic and Farsi languages
  • Fixed issues with support for Canada BlueChart g2 maps
  • Fixed issue with NMEA
  • Fixed issue with track distance data field when track logging is off
  • Fixed issue with track log naming when using BaseCamp
  • Problems with this beta software may be reported to MontanaBeta@garmin.com

 

  • Changes made from version 3.80 to 3.90:
  • Fixed possible software hang with 'white screen' when powering unit off in mount.
  • Fixed Address/Intersection searching when set to French language.
  • Changes made from version 3.70 to 3.80:
  • Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
  • Improved the readability of the scale text on the course deviation indicator (CDI) while in night mode
  • Fixed issue with downloading certain voices from the Garmin Garage
  • Fixed issue with reviewing BlueChart® g2 depth points from the map page
  • Fixed issue with NMEA In
  • Changes made from version 3.60 to 3.70:
  • Added new configurable data field options: Alarm Timer (from alarm clock page), Automotive Turn (lane assist), Avg. Lap, Compass Heading, Current Lap, Date, Elevation Above Ground, GPS Elevation, GPS Heading, Grade (must be moving), Lap Distance, Laps, Last Lap, Location of Destination, None (blank field), Stopwatch Timer, Total Lap, Track Distance (reset when current track is cleared), Vertical Dist. to Dest, Vertical Dist. to Next. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/12/configurable-data-fields.html) for more information
  • Added data field categories
  • Added trip computer setup for additional configurability (this includes adding multiple trip computer pages)
  • Improved elevation data stored in track logs
  • Improved serial support
  • Improved Arabic keyboard
  • Improved display of configurable data fields in night mode
  • Fixed 3D View to rotate based on compass heading
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue with track log recording while using the stopwatch
  • Fixed issue that could cause some geocaches not to import
  • Fixed issue with entering the next stage of a geocache while the Routing Activity is set to Prompted
  • Fixed an issue that could occur while reviewing certain geocache descriptions
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed potential issue that could occur while reviewing certain photos
  • Fixed potential issue related to shortcuts and orientation change
  • Fixed potential issue related to setting custom background images
  • Fixed potential issue with entering a street number during an address search
  • Fixed issues with NMEA output using the AMPS Rugged Mount
  • Fixed issue with magnetic north offset when projecting a waypoint

 

  • Changes made from version 3.67 to 3.68 Beta:
  • Fixed issue with power off barometric pressure trending
  • Fixed issue with barometric pressure plot when stationary
  • Fixed issue with display when entering USB mass storage
  • Fixed issue with current lap data field in dashboards
  • Improved Arabic keyboard
  • Problems with this beta software may be reported to MontanaBeta@garmin.com
  • Changes made from version 3.66 to 3.67 beta:
  • Improved display of configurable data fields in night mode
  • Fixed issue where barometer and compass data was not reported in demo mode
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Changes made from version 3.64 to 3.66 beta:
  • Fixed issue with mount profile setup
  • Fixed issue where the compass would not work unless the unit had a satellite fix
  • Fixed issue with Mac version of WebUpdater
  • Fixed intermittent issue with map drawing
  • Changes made from version 3.63 to 3.64 beta:
  • Added full profile support for Trip Computer Setup.
  • Improved display of configurable data field categories.
  • Fixed issues with supported configurable data fields in the nuvi dashboard.
  • Fixed issues with NMEA output using the AMPS Rugged Mount.
  • Changes made from version 3.60 to 3.63 beta:
  • Added new data fields: Alarm Timer (from alarm clock page), Automotive Turn (lane assist), Avg. Lap, Compass Heading, Current Lap, Date, Elevation Above Ground, GPS Elevation, GPS Heading, Grade (must be moving), Lap Distance, Laps, Last Lap, Location of Destination, None (blank field), Stopwatch Timer, Total Lap, Track Distance (reset when current track is cleared), Vertical Dist. to Dest, Vertical Dist. to Next.
  • Added data field categories.
  • Added trip computer setup for additional configurability. This includes adding multiple trip computer pages.
  • Improved elevation data stored in track logs.
  • Improved serial support
  • Fixed 3D View to rotate based on compass heading.
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue with track log recording while using the stopwatch
  • Fixed issue that could cause some geocaches not to import
  • Fixed issue with entering the next stage of a geocache while the Routing Activity is set to Prompted
  • Fixed an issue that could occur while reviewing certain geocache descriptions
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed potential issue that could occur while reviewing certain photos
  • Fixed potential issue related to shortcuts and orientation change
  • Fixed potential issue related to setting custom background images
  • Fixed potential issue with entering a street number during an address search

 

  • Changes made from version 3.50 to 3.60:
  • Added option to configure power button. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/the-need-for-speed.html) for more information.
  • Added shortcut option to toggle certain settings. See TrailTech for more information.
  • Added option to set off route recalculation from Setup > Routing.
  • Added page indicator to main menu.
  • Added scrollbars to lists.
  • Added option to avoid or allow unpaved roads in pedestrian routing.
  • Fixed shutdowns related to data field dashboards on the main menu.
  • Fixed issues with incorrect number of menu items on main menu pages.
  • Fixed display of long geocache descriptions and logs.
  • Fixed geocache ratings overlapping descriptions.
  • Fixed issue where street search would incorrectly display No Results.
  • Fixed issue where compass would not work after the unit was removed from an automotive mount.
  • Fixed issue where the route distance could be incorrect.
  • Fixed issue where calendar left and right buttons were not always responsive.
  • Changes made from version 3.40 to 3.50:
  • Improvements to the geocaching experience. See TrailTech(//garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Increased maximum number of characters allowed in Address and POI searches
  • Fixed possible shutdown with some shortcuts executed from the drawer
  • Fixed possible shutdown on powerup with mount related profile changes
  • Fixed inability to change data fields on status page dashboards
  • Fixed display of photos on review pages
  • Fixed possible shutdown when viewing a custom poi with a photo
  • Fixed potential paging issues with long geocaches logs
  • Changes made from version 3.30 to 3.40:
  • Fixed shutdown viewing routes on map
  • Fixed satellite dashboard on the map
  • Fixed issue where parts of map review page were not responsive to touch
  • Fixed issue with right side controls where dashboard and icons could overlap on main menu
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed issue where background would not update correctly behind dashboards
  • Changes made from version 3.20 to 3.30:
  • Fixed spanner mode prompt
  • Fixed issues reviewing very long routes in route planner
  • Fixed issue with disappearing dashboard on the main menu
  • Fixed issue where selected dashboard would not show up unless page was exited and reentered.
  • Fixed issues with missing map scale.
  • Fixed shutdown related to proximity alarm POIs.
  • Added Large Data Field Dashboard.
  • Added Satellite Dashboard.
  • Added ability to sort photos On A Specific Date in Photo Viewer.
  • Added View Map button to Waypoint Manager > Edit waypoint.
  • Changes made from version 3.10 to 3.20:
  • Fixed display issues during spell searches
  • Fixed ability to enable mapsets using shortcuts
  • Fixed ability to mute or unmute volume using shortcuts
  • Fixed issue with repeated anchor drag alarms
  • Fixed issue where Move Waypoint could move the wrong waypoint
  • Fixed issues with dashboards disappearing
  • Fixed issues with Find Next Closest while geocaching
  • Fixed issue where part of the map was unresponsive to touches
  • Fixed issue where nuvi mode speed field could be red while not speeding
  • Modified default map trails to appear as dashed red lines
  • Added ability to add multiple points to a route without leaving the map
  • Changes from version 2.80 to version 3.10:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (//garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Added Restore Defaults option to setup pages
  • Fixed issue where proximity alarms would not be audible
  • Fixed issue that occurred with the altimeter page when using a 24-hour clock
  • Fixed issue where the map would sometimes not refresh when using the active route page
  • Fixed an issue where the dashboard would sometimes appear while panning on the map
  • Fixed issue with saving tracks in area calculation page
  • Fixed issue with highlighting of some shortcuts in the drawer
  • Fixed issue with the keyboard layout in landscape orientation when the system language was set to French
  • Fixed issues that sometimes occurred when exiting Where To? > Address or Where To? > Intersection
  • Modified the 'Arriving at Destination' message banner so that it no longer appears when navigating to a geocache
Garmin Montana 610/680

Garmin Montana 610/680

  • Version: 2.60, 2.70
  • Datum: 28.02.2017
  • Installation: Garmin Express
  • Changes made from version 2.60 to 2.70:
  • Fixed issue where touching the screen would wake up the unit when it was in battery save mode.
  • Fixed possible freeze when the unit was in mass storage mode and then unplugged.
  • Changes made from version 2.50 to 2.60:

  • Fixed issue where the trip computer total time was not being reset when the 'reset both track and trip data' option was selected.
  • Fixed intermittent issue where device was not recognized for mass storage when connected via USB.
  • Fixed issue where waypoint time would show 'am' for waypoints marked as 12:xx pm.
  • Fixed the Waas 'D' indicator on the GPS page to allow the letter to draw.
  • Fixed issue where the 'Track On' shortcut would not start the track log.
  • Version: 2.50
  • Datum: 22.07.2016
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Added support for optional MTP interface mode (Setup > System > Interface)
  • Version: 2.40
  • Datum: 16.02.2016
  • Installation: Garmin Express
  • Download: Montana610_680_240.gcd
  • Changes made from version 2.30 to 2.40:
  • Fixed issue with incorrect trip computer time.
  • Fixed issue with track points being recorded while tracking was paused.
  • Fixed heart rate related data fields
  • Fixed issue with wrong road signs being shown in certain countries.
  • Version: 2.30
  • Datum: 19.11.2015
  • Installation: Garmin Express
  • Download: Montana610_680_230.gcd
  • Changes made from version 2.20 to 2.30:
  • vAdded ETRS89 Datum
  • Fixed issue with importing Adventures from sd cards
  • Fixed possible issue when viewing routes on map
  • Fixed incorrect geocache terrain score on map dashboard
  • Version: 2.10
  • Datum: 31.08.2015
  • Installation: Garmin Express
Garmin Monterra

Garmin Monterra

Garmin Monterra (Bild: Garmin)

Garmin Monterra (Bild: Garmin)

Monterra Software Versionen: 1.16, 1.18, 1.19, 2.90, 3.20, 3.50, 1.24, 1.26, 4,10, 1.29, 1.30

  • Version: 1.30
  • Datum: 16.11.2015
  • Installation: Monterra System Updates
  • Download: MonterraOutdoorSoftware_130.apk
  • Changes made from version 1.29 to 1.30:
  • Fixed hidden route line on certain maps
  • Version: 1.29
  • Datum: 24.09.2015
  • Installation: Monterra System Updates
  • Changes made from version 1.28 to 1.29:
  • Fixed translations
  • Version: 4.10
  • Datum: 06.08.2015
  • Installation: siehe Garmin Support
  • Version 4.10_1.28
  • Added a notification sound when approaching route vias in direct nav mode
  • Added access to Android recovery menu by holding volume down during startup
  • Improved map rendering speed when terrain layer is disabled
  • Improved raster map rendering
  • Improved stability when rapidly using pinch-to-zoom
  • Improved POIs to show up to 1.2mi zoom level instead of 300ft
  • Fixed issue with map layers sometimes panning at different rates
  • Fixed issue with map zoom level not persisting across opening/closing the app
  • Fixed grayscale Birdseye imagery drawing incorrectly
  • Fixed issue with not being able to toggle off some non-basemap images
  • Fixed issue with not showing icons for GPI points
  • Fixed issue with not being able to tap custom POIs on map
  • Fixed issue with direct routes limiting to only 50 points
  • Fixed issue with compass always pointing north when navigating a track
  • Fixed issue with elevation dashboard and widget not centering on new data
  • Fixed Mark Waypoint app not using adjusted elevation
  • Fixed issue with map datum and spheroid not saving with profiles
  • Fixed issue with routes not recalculating on profile change
  • Fixed issue with speed alert POIs displaying incorrect speed
  • Fixed issue with custom POI comments not linking URLs correctly
  • Version: 1.26
  • Datum: 19.12.2014
  • Installation: Monterra System Updates
  • Version 1.26
  • Fix Arabic labels being reversed on map
  • Fixed issue preventing calibrating altimeter to negative elevations
  • Version: 1.24
  • Datum: 22.09.2014
  • Installation: Monterra System Updates
  • Changes made from version 1.23 to 1.24:
  • Fix not being able to update GPS firmware over Express
  • Fix marine depth labels not respecting unit settings
  • Version: 3.50
  • Datum: 11.08.2014
  • Installation: Monterra System Updates (Garmin Express)
  • Version 3.50_1.23
  • Added mapping support for BlueChart g2, g2 Vision, and LakeVu maps
  • Added marine search support to Where To? app
  • Added anchor drag and off-course alarms when a marine map is installed
  • Added Man Overboard app
  • Added USGS 24k quad information to review page
  • Added toast notification on startup if a map could not be unlocked or authenticated
  • Improved BirdsEye drawing
  • Improved compass accuracy
  • Fixed not showing boating ramp POIs on TOPO maps
  • Fixed user-north compass mode to match other Garmin products
  • Fixed arrow not showing on compass when navigating on a track
  • Fixed always resetting track data on save
  • Fixed some options incorrectly being visible for archived tracks
  • Fixed map drawing issue when picking a point for proximity alarms
  • Fixed not being able to filter waypoints by symbol after rotating device
  • Fixed changes to routes being discarded after rotating device
  • Fixed occasional issue when opening/importing GPX files
  • Version: 3.20 (1.21)
  • Datum: 10.06.2014
  • Installation: Monterra System Updates (Garmin Express)
  • Version 3.20_1.21
  • Added two additional zoom levels at 20/30ft (5/10m)
  • Improved city search
  • Improved map information bar dropdown behavior
  • Fixed geocache size getting cut off on widget in certain languages
  • Fixed saving waypoints in incorrect locations for certain Map Datums
  • Fixed additional routing avoidance issues
  • Fixed elevation plot not scrolling with new data
  • Fixed possible issue if device started in a powered mount
  • Fixed possible issue with User Grids in certain languages
  • Fixed a drawing issue with certain patterned areas
  • Fixed transparent maps not drawing with only the basemap enabled
  • Fixed geocaching dashboard not switching to the closest geocache
  • Fixed daily and weekly track auto-archive
  • Fixed geocache filtering not respecting empty filters
  • Fixed Where To? > Photos and Videos not updating with new photos
  • Fixed various display issues with the Satellite app
  • Version: 2.90 (1.20)
  • Datum: 05.05.2014
  • Installation: Monterra System Updates (Garmin Express)
  • Version 2.90_1.20
  • Added support for shaped routes created in BaseCamp
  • Added ’search near city' to 'Where To?' menu
  • Improved demo mode behavior
  • Improved map browsing behavior
  • Improved performance of Route Manager
  • Improved handling of certain routing avoidances
  • After installing this update, routing avoidances will be reset to defaults
  • Fixed not displaying general route calculation errors
  • Fixed city search not searching all installed maps
  • Fixed British Grid coordinates only showing 9 digits
  • Fixed black track logs appearing as cyan
  • Fixed time zones not updating correctly with Daylight Saving Time
  • Fixed some addresses having incorrect positions on map
  • Fixed not respecting rotation lock in powered mount
  • Fixed screen timeout inconsistencies
  • Fixed Gallery app instability when sorting by location
  • Fixed translation issues
  • Version: 1.19
  • Datum: 31.03.2014
  • Installation: Monterra System Updates
  • Changes made from version 1.18 to 1.19
  • Added setting to pause music while navigation voice plays
  • Added settings widget to adjust screen brightness and orientation lock
  • Improved Birdseye image quality
  • Fixed not calculating distance or ETE for direct routing
  • Fixed intersection search for certain maps
  • Fixed some waypoints not appearing on MPC maps
  • Fixed inconsistencies with large datafield dashboard
  • Fixed translation issues
  • Fixed some text getting cut off on huge font size
  • Fixed not being able to reprogram chirp
  • Fixed preloaded waypoints becoming unreadable in Basecamp after opening
  • Fixed GB Discoverer layering issue
  • Fixed HTML not parsing in geocache logs
  • Fixed certain paths not changing color based on routing activity
  • Fixed map legend not updating with auto-zoom
  • Fixed some aviation data fields not displaying correctly
  • Fixed geocache details not displaying full geocache name
  • Fixed possible issue when viewing a route with many vias
  • Version: 1.18
  • Datum: 07.03.2014
  • Installation: Garmin Express
  • Added elevation to saved waypoints
  • Added Arabic support for map labels
  • Improved compass accuracy and responsiveness
  • Improved route calculation performance
  • Improved geocache dashboard and widget behavior
  • Improved map visibility at high latitudes
  • Fixed issue with selected geocache filter not being saved
  • Fixed 'None' voice reverting to first available voice after reboot
  • Fixed UTM coordinates being incorrect after reboot
  • Fixed issue with long route calculations
  • Fixed navigation not stopping after a geocache is logged
  • Fixed issues with geocache descriptions
  • Fixed destination geocache icon not showing
  • Fixed missing EarthCache icon
  • Fixed map re-centering on current location when device rotated
  • Fixed proximity alert radius units not changing with locale
  • Fixed issues with GPS fix and elevation in powered mount
  • Fixed using English names for some map labels
  • Fixed turn prompts in languages other than English
  • Fixed issue involving projecting a waypoint from Sight N Go
  • Version: 1.16
  • Datum: 17.12.2013
  • Installation: Garmin Express
  • Changes made from version 1.15 to 1.16:
  • Improved compass calibration process
  • Improved address search
  • Fixed issue with direct route line not updating with change in position
  • Fixed issue with Sight 'N Go not locking onto proper position
  • Fixed issue with Geocaching Application when in various languages
  • Fixed issue with chirp pairing process
  • Fixed issue with time data field in 24 hour time format
  • Fixed issue with OTA update not showing a time greater than one hour
  • Fixed issue where GPX files imported via Bluetooth could be added twice
  • Fixed intermittent issue with importing GPX files via NFC
  • Fixed intermittent issue with dashboards on device rotation
  • Fixed intermittent issue where keyboard would appear on home screen after the Home button is pressed
Garmin Oregon x50

Garmin Oregon x50

Garmin Oregon 450 (Bild: Garmin)

Garmin Oregon 450 (Bild: Garmin)

Oregon x50 Software Versionen 4.80, 5.00, 5.10, 5.20, 5.40, 5.50, 5.57 Beta, 5.60, 5.70, 5.80, 5.90, 6.00, 6.10, 6.20, 6.30, 6.40, 6.60

  • Version: 6.60
  • Datum: 06.02.2014
  • Installation: Garmin Express
  • Download: Oregonx50_WebUpdater__660.gcd
  • Changes made from version 6.40 to 6.60:
  • Added support for additional ActiveRouting cartography
  • Improved display of marine-specific lines in BlueChart g2 maps
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Version: 6.40
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 6.30 to 6.40:
  • Added support for VIRB Remote. Setup > Main Menu to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Fixed issue with route calculations always avoiding seasonally closed roads
  • Version: 6.30
  • Datum: 19.06.2013
  • Installation: WebUpdater
  • Changes made from version 6.20 to 6.30:
  • Added support for additional ActiveRouting cartography
  • Fixed issue with incorrect letter capitalization of certain map points
  • Fixed issue where wirelessly transmitting a geocache to another device would result in an error message when trying to view the received geocache in BaseCamp
  • Version: 6.20
  • Datum: 21.03.2013
  • Installation: WebUpdater
  • Changes made from version 6.10 to 6.20:
  • Improved map performance in densely-populated urban areas.
  • Fixed trail searching when using multiple active routing maps.
  • Fixed issue with saving a track’s ’show on map' status across a power cycle.
  • Fixed issue with displaying tracks on the map after performing an area calculation.
  • Fixed potential shutdown when viewing certain tracks or routes in German or Russian.
  • Fixed minor graphical issue with certain data fields on the map.
  • Version: 6.10
  • Datum: 15.11.2012
  • Installation: WebUpdater
  • Changes made from version 6.00 to 6.10:
  • Improved ascent and descent calculations.
  • Version: 6.00
  • Datum: 20.09.2012
  • Installation: WebUpdater
  • Changes made from version 5.90 to 6.00:
  • Improved map drawing at low zoom levels.
  • Fixed inability to edit archived tracks.
  • Fixed ability to use NMEA depth for waypoints and tracks.
  • Fixed display of geocache coordinates with non-default map datum.
  • Fixed potential issue with reporting tempe temperature data.
  • Fixed overlapping position text for right to left languages.
  • Version: 5.90
  • Datum: 29.08.2012
  • Installation: WebUpdater
  • Changes made from version 5.80 to 5.90:
  • Added Adventure support with latest version of BaseCamp. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/garmin-adventures.html) for more information.
  • Added support for new tempe sensor. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
  • Version: 5.80
  • Datum: 12.06.2012
  • Installation: WebUpdater
  • Changes made from version 5.50 to 5.80:
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed issue with preserving routes imported from BaseCamp (identical maps required)
  • Fixed Spell Search in German
  • Fixed possible issue with Where To? > Address searching
  • Version: 5.70
  • Datum: 31.05.2012
  • Installation: Download
  • Changes made from version 5.60 to 5.70:
  • Fixed an issue with the reporting of pressure from the barometric altimeter
  • Fixed possible issue with changing avoidance settings while actively routing
  • Problems with this software may be reported to OregonBeta@garmin.com
  • Version: 5.60
  • Datum: 25.05.2012
  • Changes made from version 5.50 to 5.60:
  • Added new route activity types and improved BaseCamp compatibility. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/05/get-active-with-garmin.html) for more information.
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed issue with preserving routes imported from Basecamp (identical maps required)
  • Fixed Spell Search in German
  • Problems with this software may be reported to OregonBeta@garmin.com

 

  • Changes made from version 5.50 Beta to 5.57 Beta:
  • Added new route activity types
  • Added support for Kenwood NMEA Waypoint Sentence
  • Improved GPS response at low speeds
  • Fixed issue with preserving routes imported from Basecamp (identical maps required)
  • Fixed Spell Search in German
  • Problems with this beta software may be reported to OregonBeta@garmin.com

 

  • Changes made from version 5.40 to 5.50:
  • Improved GPS response at low speeds.
  • Fixed potential issue when exiting geocache descriptions
  • Changes made from version 5.20 to 5.40:
  • Added Geocaching with Photos (http://garmin.blogs.com/softwareupdates/2012/01/geocaching-with-photos.html)
  • Fixed potential naming issues with imported routes from BaseCamp
  • Fixed issue with 'Hut' point type in TOPO Australia & New Zealand maps
  • Fixed issue with magnetic north offset when projecting a waypoint
  • Fixed issue with track log recording while using the stopwatch
  • Fixed mass storage issue when used without batteries
  • Changes made from version 5.10 to 5.20:
  • Fixed potential power-up issue introduced in previous release.
  • Changes made from version 5.00 to 5.10:
  • Improvements to the geocaching experience. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/09/improved-geocaching.html) for more information.
  • Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
  • Fixed issue with very long geocache descriptions
  • Fixed shutdown when reviewing certain geocache descriptions
  • Fixed issue where the photo orientation would be incorrect in the photo viewer
  • Fixed potential shutdown while scrolling through Garmin Connect photos
  • Fixed issue where some auto-archived tracks would be named in English regardless of user language
  • Fixed bug that could cause some geocaches to not import
  • Changes made from version 4.80 to 5.00:
  • Modified default map trails to appear as dashed red lines
  • Fixed issue where geocache icons would sometimes not draw on the map while using Garmin GB Discoverer™ maps
  • Changes made from version 4.50 to 4.80:
  • Added support for advanced geocache logging with OpenCaching.com. See TrailTech (http://garmin.blogs.com/softwareupdates/2011/08/advanced-geocache-logging-with-opencachingcom.html) for more information.
  • Fixed issue with multilingual custom POI files
Garmin Oregon 6x0

Garmin Oregon 6×0 (600/650/t)

Garmin Oregon 600/650 (Bild: Garmin)

Garmin Oregon 600/650 (Bild: Garmin)

Oregon 6×0 Software Versionen: 2.60, 2.70, 2.80, 2.90, 3.10, 3.30, 3.50, 3.60, 3.70, 3.80, 3.90, 4.10, 4.20, 4.30, 4.40, 4.60, 4.80, 4.90, 5.00

  • Version: 5.00
  • Datum: 21.07.2016
  • Installation: Garmin Express
  • Changes made from version 4.90 to 5.00:
  • Added support for optional MTP interface mode (Setup > System > USB Mode)
  • Version: 4.90
  • Datum: 06.05.2016
  • Installation: Garmin Express
  • Download: Oregon6x0_WebUpdater__490.gcd
  • Changes made from version 4.80 to 4.90:
  • Added support for Bike Speed Sensor
  • Added support for Bike Cadence Sensor
  • Fixed issue with saved track stats precision
  • Version: 4.80
  • Datum: 18.12.2015
  • Installation: Garmin Express
  • Download: Oregon6x0_WebUpdater__480.gcd
  • Changes made from version 4.60 to 4.80:
  • Improved address search.
  • Fixed issue importing adventures from SD cards.
  • Version: 4.60
  • Datum: 14.07.2015
  • Installation: Garmin Express
  • Changes made from version 4.40 to 4.60:
  • Improved 'Save Portion' track feature. When saving a portion, the device now remembers that position in the track log so it can be used as a track segment for future portion saving.
  • Fixed possible erroneous track point on power on.
  • Fixed output of SNR in $GPGSV NMEA sentence.
  • Version: 4.40
  • Datum: 21.01.2015
  • Installation: Garmin Express
  • Changes made from version 4.30 to 4.40:
  • Fixed several track distance statistic issues
  • Version: 4.30
  • Datum: 08.10.2014
  • Installation: Garmin Express
  • Changes made from version 4.20 to 4.30:
  • Fixed possible issue where the internal battery pack would not charge
  • Fixed possible graphical issue in landscape orientation while using nuvi mode
  • Version: 4.20
  • Datum: 17.09.2014
  • Installation: Garmin Express
  • Changes made from version 4.10 to 4.20:
  • Improved cartography support
  • Improved boot time when a large amount of BirdsEye satellite imagery is present
  • Version: 4.10
  • Datum: 02.07.2014
  • Installation: Garmin Express
  • Changes made from version 3.90 to 4.10:
  • Fixed issue with barometer when auto calibration is turned off.
  • Fixed Cyrillic cardinal direction characters in waypoint position editing.
  • Fixed missing ascent, descent, and elevation statistics when reviewing certain tracks.
  • Fixed issue with geocaching 'Next Stage' feature.
  • Fixed possible shutdown when using custom waypoint symbols.
  • Version: 3.90
  • Datum: 27.03.2014
  • Installation: Garmin Express
  • Changes made from version 3.80 to 3.90:
  • Improved average ascent and average descent data fields
  • Improved vertical speed and grade data fields
  • Version: 3.80
  • Datum: 06.02.2014
  • Installation: Garmin Express
  • Changes made from version 3.60 to 3.80:
  • Added a separate zoom level setting for geocaches (Setup > Map > Advanced Map Setup > Zoom Levels > Geocaches)
  • Added support for additional ActiveRouting cartography
  • Improved GLONASS performance
  • Improved display of marine-specific lines in BlueChart g2 maps
  • Improved boot time when large amounts of photos are present
  • Fixed map display of highway shields
  • Fixed issue with incorrect letter capitalization of certain map points
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Fixed possible issue with +/- buttons when using Sight N' Go
  • Version: 3.70 Von Garmin zurückgezogen!
  • Datum: 30.01.2014
  • Installation: Garmin Express
  • Changes made from version 3.60 to 3.70:
  • Added a separate zoom level setting for geocaches (Setup > Map > Advanced Map Setup > Zoom Levels > Geocaches)
  • Added support for additional ActiveRouting cartography
  • Improved GLONASS performance
  • Improved display of marine-specific lines in BlueChart g2 maps
  • Improved boot time when large amounts of photos are present
  • Fixed map display of highway shields
  • Fixed issue with incorrect letter capitalization of certain map points
  • Fixed issue retrieving PLSS data in certain TOPO US 24k maps
  • Fixed possible issue with +/- buttons when using Sight N' Go
  • Version: 3.60
  • Datum: 10.12.2013
  • Installation: Garmin Express
  • Changes made from version 3.50 to 3.60:
  • Fixed calories not being displayed when using a heart rate monitor.
  • Fixed erroneous temperature values below 0 degrees C when using a tempe wireless temperature sensor.
  • Fixed proximity warning alert text being unreadable in some situations.
  • Fixed possible shutdown when using the Favorites dashboard.
  • Version: 3.50
  • Datum: 05.11.2013
  • Installation: WebUpdater
  • Changes made from version 3.30 to 3.50:
  • Fixed issue with wirelessly transferring geocaches stored in .ggz files.
  • Fixed issues with entering coordinates in languages other than English.
  • Fixed elevation plot display problems.
  • Fixed potential shutdown when setting up the Page Loop feature.
  • Version: 3.30
  • Datum: 30.09.2013
  • Installation: WebUpdater
  • Changes made from version 3.10 to 3.30:
  • Improved GPS performance
  • Improved battery save mode: The first press of the user key or the power key to turn the screen on will no longer execute that key’s customized function
  • Improved pairing behavior with cadence sensors
  • Fixed Latvian keyboard
  • Fixed issue with geocache ratings when using the 'Next Stage' feature for multicaches
  • Fixed display of certain map names when viewing the list of maps loaded on the device
  • Fixed inconsistent exponent formats in the Calculator application
  • Fixed possible shutdown when viewing the Elevation Plot in landscape orientation
  • Fixed possible shutdown when selecting a route in the Route Planner application
  • Fixed possible shutdown when exiting the Photo Viewer application
  • Fixed possible shutdown when using the Geocaching dashboard in the Compass application
  • Fixed possible shutdown when using certain dashboards on the Main Menu
  • Fixed possible shutdown when sorting tracks alphabetically in the Track Manager application
  • Fixed possible shutdown when selecting a track from the Calendar application
  • Fixed possible issue with overwriting waypoints received by the Share Wirelessly application
  • Version: 3.10
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 2.90 to 3.10:
  • Added support for VIRB Remote. Setup > Main Menu to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Improved 3-axis compass performance
  • Improved guidance text on the map when using certain maps
  • Fixed an issue with the geocaching quick filter in languages other than English
  • Fixed a possibility of certain geocaches not appearing on the map immediately after turning on the device
  • Version: 2.90
  • Datum: 29.07.2013
  • Installation: WebUpdater
  • Changes made from version 2.80 to 2.90:
  • Fixed issue with route calculations always avoiding seasonally closed roads
  • Fixed USB compatibility issue
  • Version: 2.80
  • Datum: 28.06.2013
  • Installation: WebUpdater
  • Changes made from version 2.70 to 2.80:
  • Added Icelandic keyboard
  • Added support for additional ActiveRouting cartography
  • Fixed missing menu button in the geocaching application when landscape controls are set to display on the right side of the screen
  • Fixed geocaches with a size of 'Not Chosen' not properly displaying on the map
  • Fixed minor graphical issue with certain geocaches when being displayed in a list
  • Version: 2.70
  • Datum: 29.05.2013
  • Installation: WebUpdater
  • Added support for new ActiveRouting cartography
  • Improved support for Garmin LakeVü HD cartography
  • Improved photo quality (650/650t models)
  • Fixed potential shutdown when viewing Calendar application
  • Fixed issue with waypoint distances in Waypoint Averaging application
  • Fixed issue with waypoint deletion when results are filtered
  • Fixed issue with reimporting new GPX/GGZ files
  • Fixed issue with unknown geocache containers being marked as Large
  • Fixed issue with scroll arrows on current track info page
  • Fixed intermittent issue with vehicle appearing off center in 3D View application
  • Fixed uppercase Czech keyboard in landscape orientation
  • Version: 2.60
  • Datum: 19.04.2013
  • Installation: WebUpdater
  • Changes made from version 2.30 to 2.60:
  • Improved map manipulation: Better zooming, rotating and panning
  • Improved Track Manager: Adds Track Sorting, Searching and Track Information
  • Improved Track Settings: Allows for prompted data reset and trip recording control
  • Improved Geocaching Filters: Applies filtering to the map and dashboards
  • Improved Favorites dashboard: Adds editing capability directly into dashboard
  • Improved Page Loop functionality: Allows for faster paging
  • General visual and stability improvements
Garmin Oregon 7x0

Garmin Oregon 7×0 (700/750/t)

Garmin Oregon 700 (©Garmin)

Garmin Oregon 700 (©Garmin)

Oregon 7×0 Software Versionen: 2.40, 2.50, 2.60, 2.62 Beta, 2.70, 2.80, 3.10

  • Version: 3.10
  • Datum: 02.03.2017
  • Installation: Garmin Express
  • Changes made from version 2.90 to 3.10:
  • Fixed issue where track portions were being saved incorrectly.
  • Fixed issue where a geocache list deleted from geocaching.com would still show up on the device.
  • Fixed issue where the course line would always be drawn from the vehicle on the map.
  • Version: 2.80
  • Datum: 01.12.2016
  • Installation: Garmin Express
  • Changes made from version 2.70 to 2.80:
  • Improved speed and reliability of weather and geocaching live features when using Wi-Fi.
  • Fixed various Connect IQ issues
  • Version: 2.70
  • Datum: 02.11.2016
  • Installation: Garmin Express
  • Changes made from version 2.60 to 2.70:
  • Added support for Connect IQ Apps and Widgets
  • Added background download of geocache descriptions, hints, and logs for geocaching.com premium members
  • Added power off pressure trend
  • Improved Geocache Lists experience by adding bookmark lists as well as fixing some issues
  • Fixed possible issues using Connect IQ Data Fields
  • Fixed possible issue where calories were not recording with a heart rate monitor connected
  • Fixed possible shutdown while measuring distance on the map
  • Fixed fit file support for track logs with greater than 20,000 points
  • Fixed possible issue reconnecting to speed and cadence sensors after a power cycle
  • Fixed display issue after rotating on the notification page
  • Fixed issue where live geocaches would overwrite geocaches loaded via .gpx file
  • Fixed inconsistant data reporting for current tracks and saved tracks
  • Fixed possible issues on the turn review page
  • Version: 2.62 Beta
  • Datum: 25.10.2016
  • Installation: Download
  • Changes made from version 2.60 to 2.62:
  • Added support for Connect IQ Apps and Widgets
  • Added background download of geocache descriptions, hints, and logs for geocaching.com premium members
  • Improved Geocache Lists experience by adding bookmark lists as well as fixing some issues
  • Fixed possible issues using Connect IQ Data Fields
  • Fixed possible issue where calories were not recording with a heart rate monitor connected
  • Fixed possible shutdown while measuring distance on the map
  • Fixed fit file support for track logs with greater than 20,000 points
  • Fixed possible issue reconnecting to speed and cadence sensors after a power cycle
  • Fixed display issue after rotating on the notification page
  • Fixed issue where live geocaches would overwrite geocaches loaded via .gpx file
  • Fixed inconsistant data reporting for current tracks and saved tracks
  • Version: 2.60
  • Datum: 05.08.2016
  • Installation: Garmin Express
  • Changes made from version 2.50 to 2.60:
  • Fixed issue when configuring multiple Connect IQ data fields
  • Fixed battery charging when connected to a PC
  • Version: 2.50
  • Datum: 19.07.2016
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Improved Geocaching Live features by adding ability to download the nearest geocaches to current location, near a waypoint, near a recent find, and near a map point while in the geocache list tab of geocaching.
  • Improved POI searches
  • Improved weather radar colors for regions outside the United States
  • Fixed intermittent issues with map presses and map cursor
  • Fixed intermittent issue when glonass was enabled
  • Fixed issue with current weather data when using a Wi-Fi connection
  • Fixed issue with unit to unit transfer of geocaches obtained through geocaching live
  • Fixed issues with Connect IQ data fields that use ANT
  • Version: 2.40
  • Datum: 01.07.2016
  • Installation: Garmin Express
  • Changes made from version 2.30 to 2.40:
  • Improved GPS performance.

Garmin epix

Garmin epix

Garmin epix Outdoor-GPS-Smartwatch

Garmin epix Outdoor-GPS-Smartwatch (Bild: Garmin)

epix Software Versionen: 1.85, 2.00, 2.10, 2.20, 2.30, 2.40, 2.50, 2.70, 2.80, 2.90, 2.93 Beta, 3.10, 3.20, 3.40

  • Version: 3.40
  • Datum: 02.02.2017
  • Installation: Garmin Express
  • Changes made from version 3.20 to 3.40:
  • Fixed issue with activity data field setup drawing the incorrect data field layout.
  • Fixed issue with invalid elevation data being shown for map points with no known elevation data.
  • Fixed issue with the screen unlocking during activities and after when lock screen was set.
  • Fixed issues with alarm snooze not working.
  • Fixed possible crash when too many Connect IQ data fields are installed.
  • Changes made from version 3.10 to 3.20:
  • Fixed a potential lockup when saving or discarding an activity.
  • Version: 3.10
  • Datum: 02.02.2016
  • Installation: Garmin Express
  • Download: EpixSystem_WebUpdater__320.gcd
  • Changes made from version 3.10 to 3.20:
  • Fixed a potential lockup when saving or discarding an activity.
  • Version: 3.10
  • Datum: 30.10.2015
  • Installation: Garmin Express
  • Download: EpixSystem_WebUpdater__310.gcd
  • Changes made from version 2.90 to 3.10:
  • Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation)
  • Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature
  • Added ability to configure the map detail level. Reduce map detail level to improve map drawing speeds (Settings > Map > Detail)
  • Added support for Connect IQ SDK 1.2.1
  • Fixed issue with storm alerts
  • Fixed issue with foot pod dropping as speed or distance source
  • Version: 2.93 Beta
  • Datum: 30.09.2015
  • Installation: Download
  • Changes made from version 2.90 to 2.93:
  • Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation)
  • Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature
  • Added ability to configure the map detail level. Reduce map detail level to improve map drawing speeds (Settings > Map > Detail)
  • Added support for Connect IQ SDK 1.2.0
  • Fixed issue with storm alerts
  • Installation Instructions: Connect your epix to your computer using the USB cable. Download and unzip Epix_293Beta.zip. Place the gupdate.GCD file in the \GARMIN folder of your device’s internal storage drive. Disconnect your device from the computer, approve the update on the watch, and wait for the update to finish. If you would like to revert to a previous public release software, follow the above steps but place the gupdate_XYY.GCD file in the \GARMIN folder. Rename the file to gupdate.GCD before disconnecting your device. NOTE: If you revert to an older version of software, all of your settings will be reset to defaults.
  • Version: 2.90
  • Datum: 10.09.2015
  • Installation: Garmin Express
  • Changes made from version 2.80 to 2.90:
  • Added ability to configure foot pod speed and distance (Settings > Sensors > Foot Pod)
  • Added the option to configure the navigation heading bug (Settings > Navigation > Heading Bug)
  • Added support for editing altitude and position for Saved Locations (Navigation > Saved Locations)
  • Added setting to control Bluetooth connection alerts (Settings > Bluetooth > Alerts)
  • Added support for Connect IQ SDK 1.1.4
  • Improved low battery notifications
  • Fixed issue with navigation persisting after saving/discarding an activity
  • Fixed issue with altimeter not working properly outside of activities
  • Version: 2.80
  • Datum: 13.07.2015
  • Installation: Garmin Express
  • Changes made from version 2.70 to 2.80:
  • Added Course navigation mode (Settings > Navigation > Type). An HSI Compass will be utilized on the Guide data page when navigating in this mode
  • Added support for Smart Notification Actions (interact with the incoming notifications directly from the pop-up or within the Notifications widget, e.g. clear a message or reject an incoming call)
  • Added support for trails found in ActiveRouting cartography
  • Added magnetic variation compass setting ( Settings > Sensors > Compass > North Ref. > User )
  • Improved support of edited locations from BaseCamp
  • Improved city spell search
  • Improved pace in UltraTrac
  • Improved map drawing performance for long activities and courses
  • Improved track log for open water swim activities
  • Fixed potential issue when loading large custom map files
  • Fixed a potential issue with navigating courses
  • Fixed an issue with utilizing the setting for Swim Stroke Type Detection
  • Fixed issues with Hide/Show Track Log and Hide/Show User Locations map settings
  • Version: 2.70
  • Datum: 23.07.2015
  • Installation: Garmin Express
  • Changes made from version 2.50 to 2.70:
  • Added support for HRM-Tri and HRM-Swim
  • Added a heading arrow indicator to data pages when in navigation mode
  • Added support for 'Auto' backlight mode (options are now available to configure backlight separately for keys, alerts and gestures: Settings > System > Backlight)
  • Added support for Walking sport type (Settings > Apps > Add New)
  • Added support for configuring LAP key behavior (Settings > Apps)
  • Added ability to delete all locations on device (Navigation > Saved Locations > UP (to get to bottom of list) > Delete All)
  • Added Back to Start option for straight-line navigation back to activity start
  • Added Hot Keys press-and-hold START and BACK key customization (Settings > System > Hot Keys)
  • Improved ascent and descent calculations
  • Fixed lap banner times for activities longer than one hour
  • Fixed issue with display of 3 digit speeds on ski data pages
  • Fixed issue with saving of lap ascent values
  • Fixed potential issue with steps being lost during an activity
  • Version: 2.50
  • Datum: 09.07.2015
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Added power alerts setup (Settings > Apps > Select Biking App > Alerts > Add New > Power)
  • Added 'Find My Phone' app (found at the bottom of the app list)
  • Added Foot Pod auto calibration support
  • Improved Connect IQ download experience via Garmin Connect Mobile
  • Fixed potential issue with 'Resume Later' app option
  • Fixed issues with metronome
  • Version: 2.40
  • Datum: 23.06.2015
  • Installation: Garmin Express
  • Changes made from version 2.30 to 2.40:
  • Improved GPS tracking performance (Requires GPS Software 2.90. Note: after applying GPS software updates, for best results please allow the device to track GPS signals continuously for 10 to 15 minutes. This one-time process will allow the device to re-accumulate satellite information lost in the update process)
  • Improved GPS distance accumulation (requires GPS Software 2.90)
  • Added support for Connect IQ SDK 1.1.3
  • Version: 2.30
  • Datum: 18.06.2015
  • Installation: Garmin Express
  • Changes made from version 2.20 to 2.30:
  • Added support for Connect IQ SDK 1.1.2
  • Improved Connect IQ experience and stability
  • Version: 2.20
  • Datum: 11.05.2015
  • Installation: Garmin Express
  • Changes made from version 2.10 to 2.20:
  • Improved drill log page
  • Fixed issue with recovery time not displaying correctly
  • Fixed issue with LiveTrack
  • Fixed issue with showing courses on the map page
  • Fixed potential shutdown during a workout activity
  • Version: 2.10
  • Datum: 22.04.2015
  • Installation: Garmin Express
  • Version: 2.00
  • Datum: 16.04.2015
  • Installation: Garmin Express
  • Version: 1.85
  • Datum: 01.04.2015
  • Installation: Garmin Express
Garmin fenix

Garmin fenix, D2, tactix

Garmin Fenix (Bild: Garmin)

Garmin Fenix (Bild: Garmin)

fenix Software Versionen 2.30, 2.40, 2.60, 2.70, 2.80, 2.90, 3.00, 3.10, 3.12 Beta, 3.13 Beta, 3.16 Beta, 3.20, 3.30, 3.40, 3.50, 3.60, 3.70, 3.90, 4.01 Beta, 4.00, 4.02 Beta, 4.05 Beta, 4.11 Beta, 4.12 Beta, 4.13 Beta, 4.14 Beta, 4.15 Beta, 4.16 Beta, 4.17 Beta, 4.18 Beta, 4.40, 4.50, 4.70, 4.80, 5.00

  • Version: 5.00
  • Datum: 07.08.2015
  • Installation: Garmin Express
  • Download: fenix_D2_tactix_500.gcd
  • Changes made from version 4.80 to 5.00:
  • Fixed issue with cadence values shown when viewing an Activity on Garmin Connect.
  • Version: 4.80
  • Datum: 23.09.2014
  • Installation: Garmin Express
  • Changes made from version 4.70 to 4.80:
  • Improved smart notification formatting
  • Improved communication with Garmin Connect Mobile
  • Fixed elapsed time calculation for long activities
  • Fixed possible issue with long activities missing data
  • Fixed issues with compass calibration
  • Fixed average power balance calculation
  • Version: 4.70
  • Datum: 17.07.2014
  • Installation: Garmin Express
  • Changes made from version 4.50 to 4.70:
  • Added support for Android Smart Notifications
  • Version: 4.50
  • Datum: 19.06.2014
  • Installation: Garmin Express
  • Changes made from version 4.40 to 4.50:
  • Added support for Android version of Garmin Connect Mobile app (automatic uploads, LiveTrack, faster GPS from downloaded satellite data file, ability to download Courses and Workouts)
  • Fixed potential issues with workout alerts
  • Version: 4.40
  • Datum: 22.05.2014
  • Installation: Garmin Express
  • Changes made from version 4.00 to 4.40:
  • Added ability to determine speed, distance, cadence and steps in Indoor mode (when no Foot Pod is present). Enable in Setup > System > GPS Mode > Indoor. Auto calibration occurs in Normal GPS Mode when FIT Activity is set to Running
  • Added a 'Ski-Snowboard' profile. Select this profile to enable a new alpine/downhill ski and snowboard experience
  • Added support for Smart Notifications. Note: the Apple Notification Center Service (ANCS) feature requires an Apple iPhone equipped with Bluetooth 4.0 wireless technology and iOS 7 or later. Enable in Setup > Bluetooth
  • Added support for Garmin Connect Mobile app (iOS only, automatic uploads, LiveTrack, faster GPS from downloaded satellite data file, ability to download Courses and Workouts)
  • Added support for Interval Workouts. Enable in Setup > Menu > Add Page > Workouts
  • Added support for Workouts loaded from Garmin Connect (garminconnect.com)
  • Added Bluetooth setting to be stored in profiles.
  • Added cadence output when using Indoor mode with no Foot Pod.
  • Added support for displaying next and final vertical distances during track navigation.
  • Improved display of sunrise and sunset time when used on the time page.
  • Improved average ascent, average descent, vertical speed and grade data fields.
  • Improved speed to load details page
  • Fixed issue with UTC time in watch mode
  • Fixed issue with Final ETE alert
  • Fixed issue with Jumpmaster

 

  • Version: 4.18 Beta
  • Datum: 16.05.2014
  • Installation: Download
  • Changes made from version 4.17 to 4.18:
  • Improved reliability of activity upload and connecting with Garmin Connect Mobile (iOS only)
  • Version: 4.17 Beta
  • Datum: 29.04.2014
  • Installation: Download
  • Changes made from version 4.16 to 4.17:
  • Fixed potential issue with transfer of workouts from Garmin Connect Mobile (iOS only)
  • Fixed potential issue with ANT sensors failing to reconnect.
  • Version: 4.16 Beta
  • Datum: 16.04.2014
  • Installation: Download
  • Changes made from version 4.15 to 4.16:
  • Improved BLE connectivity.
  • Improved ANT connections.
  • Fixed a possible issue with battery drain.
  • Version: 4.15 Beta
  • Datum: 21.03.2014
  • Installation: Download
  • Changes made from version 4.14 to 4.15:
  • Improved workout step tones to match message tones.
  • Improved average ascent, average descent, vertical speed and grade data fields
  • Fixed possible issue with unit to unit transfers
  • Fixed issue with Jumpmaster
  • Fixed issue keeping the unit from entering low power mode.
  • Fixed issue with Final ETE alert
  • Fixed issue with locating satellites page when starting a workout
  • Fixed workouts details page showing incorrect starting repeated step
  • Version: 4.14 Beta
  • Datum: 27.02.2014
  • Installation: Download
  • Changes made from version 4.13 to 4.14:
  • Add ability to download Courses and Workouts from Garmin Connect Mobile
  • Version: 4.13 Beta
  • Datum: 27.02.2014
  • Installation: Download
  • Changes made from version 4.12 to 4.13:
  • Improved BLE transfer speed
  • Improved speed to load details page
  • Fixed issue with sensors always on mode not going to low power mode
  • Issues with this beta software may be reported to fenix@garmin.com
  • Version: 4.12 Beta
  • Datum: 21.02.2014
  • Installation: Download
  • Changes made from version 4.11 to 4.12:
  • Fixed possible shutdown on power up introduced in 4.11
  • Issues with this beta software may be reported to fenix@garmin.com
  • Version: 4.11 Beta
  • Datum: 20.02.2014
  • Installation: Download
  • Changes made from version 4.05 to 4.11:
  • Added support for Garmin Connect Mobile app ( automatic uploads, LiveTrack, faster GPS from downloaded satellite data file )
  • Improved ski mode features
  • Improved workout support
  • Fixed issues with connecting ANT+ sensors
  • Issues with this beta software may be reported to fenix@garmin.com
  • Version: 4.05 Beta
  • Datum: 31.12.2013
  • Installation: Download
  • Changes made from version 4.02 to 4.05:
  • Added support for displaying next and final vertical distances during track navigation.
  • Improved display of sunrise and sunset time when used on the time page.
  • Improved vertical speed.
  • Fixed a possible issue where duplicate copies of fenix would show on paired phones.
  • Fixed a shutdown that could happen when using ANT accessories.
  • Version: 4.02 Beta
  • Datum: 12.12.2013
  • Installation: Download
  • Changes made from version 4.01 to 4.02:
  • Added Bluetooth setting to be stored in profiles.
  • Added cadence output when using Indoor mode with no Foot Pod.
  • Improved pace when using Indoor mode with no Foot Pod.
  • Fixed issue with tempe temperature not worked below 0 degrees C.
  • Fixed issue with Foot Pod data not reporting correctly.
  • Fixed issue with Foot Pod calibration not working properly.
  • Fixed issue with calories not being reported with a Heart Rate monitor.
  • Fixed issue with workouts not being loaded properly if the first 16 characters were exact matches.
  • Fixed issues with workout banner text formatting.
  • Fixed issue that would prevent pairing to Basecamp Mobile.
  • Fixed issue where ANT sensors would not reconnect after disabling Bluetooth.
  • Fixed issue with workouts not working with auto pause enabled.
  • Fixed issue where the lap key would not work if the track was paused or auto paused.
  • Fixed possible issue where there was an extra laps recorded in the FIT file during workouts.
  • Issues with this beta software may be reported to fenix@garmin.com

 

  • Version: 4.00
  • Datum: 04.12.2013
  • Installation: Garmin Express
  • Changes made from version 3.70 to 4.00:
  • Added project waypoint application. Setup > Menu to add.
  • Improved virtual partner.
  • Improved more and most intervals for the auto track method.

 

  • Version: 4.01 Beta
  • Datum: 04.12.2013
  • Installation: Download
  • Changes made from version 4.00 to 4.01:
  • Added ability to determine speed, distance, cadence and steps in Indoor mode (when no Foot Pod is present). Enable in Setup > System > GPS Mode > Indoor. Auto calibration occurs in Normal GPS Mode when FIT Activity is set to Running
  • Added a 'Ski-Snowboard' profile. Select this profile to enable a new alpine/downhill ski and snowboard experience
  • Added support for Smart Notifications. Note: the Apple Notification Center Service (ANCS) feature requires an Apple iPhone equipped with Bluetooth 4.0 wireless technology and iOS 7 or later. Enable in Setup > Bluetooth
  • Added support for Interval Workouts. Enable in Setup > Menu > Add Page > Workouts
  • Added support for Workouts loaded from Garmin Connect (garminconnect.com)
  • Issues with this beta software may be reported to fenix@garmin.com

 

  • Version: 3.90
  • Datum: 31.10.2013
  • Installation: Garmin Express
  • Changes made from version 3.70 to 3.90:
  • Added project waypoint application. Setup > Menu to add.
  • Improved virtual partner.
  • Improved more and most intervals for the auto track method.
  • Version: 3.70
  • Datum: 10.10.2013
  • Installation: Garmin Express
  • Changes made from version 3.50 to 3.70:
  • Added recording of distance with cadence sensor for indoor activities
  • Fixed potential issue with device becoming unresponsive after saving a track
  • Fixed issue with display of average heart rate in FIT History
  • Version: 3.60
  • Datum: 25.09.2013
  • Installation: WebUpdater
  • Changes made from version 3.50 to 3.60:
  • Added recording of distance with cadence sensor for indoor activities
  • Fixed potential issue with device becoming unresponsive after saving a track
  • Fixed issue with display of average heart rate in FIT History
  • Version: 3.50
  • Datum: 20.08.2013
  • Installation: WebUpdater
  • Changes made from version 3.40 to 3.50:
  • Added support for VIRB Remote. Setup > Menu to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
  • Added Virtual Partner (options found under Setup > Fitness > Virtual Partner)
  • Version: 3.40
  • Datum: 29.05.2013
  • Installation: WebUpdater
  • Added full support for GSC 10 Speed/Cadence bike sensor to allow calibration and display speed (options found under Setup > ANT Sensor > Bike Spd/Cad, Setup > Fitness > Bike Speed)
  • Added 'UTC (24 hr)' option to alternate time zone list. This option displays UTC time in 24-hour format regardless of system settings
  • Added support for 'Alt. Zones' to become a data page option
  • Version: 3.30
  • Datum: 13.05.2013
  • Installation: WebUpdater
  • Changes made from version 3.20 to 3.30:
  • Added support for new languages (transliterated): Croatian, Czech, Greek, Polish, Russian, Slovakian, and Slovenian. Note: Apply software update and then reconnect the device a second time to download the new language files.
  • Version: 3.20
  • Datum: 23.04.2013
  • Installation: WebUpdater
  • Changes made from version 3.10 to 3.20:
  • Added Indoor data page loop to profiles
  • Added altitude to fit activities in Indoor mode
  • Added '3D' speed and distance reporting. Includes both horizontal and vertical components in calculations. Setup > Sensors > Altimeter > 3D Data
  • Added 'Ski Mode' setting for Auto Pause feature. Intended use for downhill/alpine skiing. Pause the tracking time while not moving or while moving upward on the ski lift. Setup > Tracks > Auto Pause
  • Added 'Ski Mode' setting for Auto Lap feature. Intended use for downhill/alpine skiing. Lap extended to accommodate ski 'run' functionality. Use as an automatic run counter and to separate data for individual run statistics. Setup > Fitness > Auto Lap
  • Added ELAPSED data field option, displaying total time since tracking/activity start (pause time is included)
  • Fixed potential issue with calories being reset when a heart rate monitor disconnects
  • Fixed potential issue with incorrect max speed
  • Fixed alternate time zones during DST
  • Fixed display of headings over 180 in Sight N Go application
  • Fixed issue where Locating Satellites banner could appear when Indoor Training was started
  • Fixed potential shutdown editing waypoint names with the degree symbol
  • Fixed potential issue with .gpx files containing averaged waypoints
  • Fixed potential issue leading to spikes in speed output
  • Fixed potential issue causing battery to drain faster than normal
  • Fixed potential issue when reordering menu items in Setup > Menu
  • Fixed potential unit freeze when viewing geocache logs
  • Fixed autozoom on the map
  • Fixed potential issue locating satellites when marking a waypoint
  • Fixed potential issue with elevation units when switching profiles
  • Fixed potential issue where manually calibrated elevation would change back to a previous value
  • Fixed potential shutdown using hold keys set to MOB

 

  • Version: 3.16 Beta
  • Datum: 28.03.2013
  • Installation: Download
  • Changes made from version 3.13 to 3.16:
  • Added Indoor data page loop to profiles
  • Improved ski mode auto pause while on ski lifts
  • Improved ski mode auto lap run counter, runs are now added sooner on the downhill portion
  • Fixed alternate time zones during DST
  • Fixed display of headings over 180 in Sight? N? Go application
  • Fixed issue where Locating Satellites banner could appear when Indoor Training was started
  • Fixed potential shutdown editing waypoint names with the degree symbol
  • Fixed potential issue with .gpx files containing averaged waypoints
  • Fixed potential issue leading to spikes in speed output
  • Issues with this beta software may be reported to fenix@garmin.com
  • Version: 3.13 Beta
  • Datum: 07.03.2013
  • Installation: Download
  • Changes made from version 3.12 to 3.13:
  • Fixed potential issue causing battery to drain faster than normal
  • Fixed potential issue with calories being reset when a heart rate monitor disconnects
  • Fixed potential issue with incorrect max speed
  • Fixed issue with wireless transfer
  • Visit https://forums.garmin.com/showthread.php?34675-Fenix-3-12-Beta-Software&p=166405#post166405. A 'Skiing' profile is available for download there. This profile includes new settings enabled and relevant data fields that would be useful while downhill/alpine skiing.
  • Issues with this beta software may be reported to fenix@garmin.com.
  • Version: 3.12 Beta
  • Datum: 22.02.2013
  • Installation: Download
  • Added '3D' speed and distance reporting. Includes both horizontal and vertical components in calculations. Setup > Sensors > Altimeter > 3D Data.
  • Added 'Ski Mode' setting for Auto Pause feature. Intended use for downhill/alpine skiing. Pause the tracking time while not moving or while moving upward on the ski lift. Setup > Tracks > Auto Pause.
  • Added 'Ski Mode' setting for Auto Lap feature. Intended use for downhill/alpine skiing. Lap extended to accommodate ski 'run' functionality. A lap is performed at the bottom of each run (as soon as a ski lift is detected). Use as an automatic run counter and to separate data for individual run statistics. Setup > Fitness > Auto Lap.
  • Added ELAPSED data field option, displaying total time since tracking/activity start (pause time is included).
  • Visit https://forums.garmin.com/showthread.php?34675-Fenix-3-12-Beta-Software&p=166405#post166405. A 'Skiing' profile is available for download there. This profile includes new settings enabled and relevant data fields that would be useful while downhill/alpine skiing.
  • Issues with this beta software may be reported to fenix@garmin.com.

 

  • Version: 3.10
  • Datum: 19.01.2013
  • Installation: myDashboard
  • Changes made from version 3.00 to 3.10:
  • Added Search Near capability to waypoint list, geocache list, and city list
  • Added minimum and maximum speed alerts
  • Improved calorie calculation
  • Improved barometric pressure when GPS is off
  • Improved time interval and distance interval alerts
  • Improved 'til sunset' alert and now allow it to be set correctly in the hh:mm:ss format
  • Fixed issue where track log points would not be logged in indoor training mode with the barometer set to fixed
  • Fixed potential issue with daily and weekday alarm clock alarms
  • Fixed issues with FIT files created while in UltraTrac mode
  • Fixed issue with hiding tracks on the map
  • Fixed potential issue where temperature, altimeter, and barometer sensor values could go invalid
  • Fixed issue with waypoint name text in waypoint averaging application
  • Fixed intermittent issues with alert messages
  • Version: 3.00
  • Datum: 30.11.2012
  • Installation: myDashboard
  • Changes made from version 2.90 to 3.00:
  • Added ability to select Venezuela and UTC time zones
  • Added continuous altimeter auto calibration mode
  • Improved altimeter auto calibration. Settings are now: Off, At Start or Continuous. Use 'At Start' for an initial calibration from GPS when tracking has started. This will result in more consistent relative elevation change. Use 'Continuous' to continually calibrate the barometer towards the current GPS elevation. This will result in a more stable elevation during pressure changes due to weather.
  • Improved ETE/ETA calculations so they are more responsive to speed changes
  • Fixed cadence units overlap in bottom data field
  • Fixed issue with proximity alerts when GPS was off
  • Fixed potential issue with alert notification settings
  • Fixed issue where Track and FIT History details did not match for the same activity
  • Fixed issue with Time -> Til Sunset alert
  • Version: 2.90
  • Datum: 01.11.2012
  • Installation: myDashboard
  • Changes made from version 2.80 to 2.90:
  • Added indoor training support http://garmin.blogs.com/softwareupdates/2012/11/getting-fit-with-fenix.html
  • Added Foot Pod support
  • Added FIT History to main menu ( moved from Tracks )
  • Added additional details in FIT History
  • Added Save as Track option to FIT History
  • Added Delete option to FIT History
  • Added ability to Pan the map when reviewing Tracks, Routes and Waypoints
  • Added precision to heart rate zone data field
  • Added feet/hr vertical speed units
  • Improved vertical speed
  • Improved ANT sensor connection reliability
  • Improved calorie calculation
  • Improved performance of elevation data in fixed altimeter mode when GPS is not running
  • Improved performance of elevation data in sensors always on and sensors on demand modes
  • Improved waypoint list length
  • Fixed potential issue with alternate time zone DST calculations
  • Fixed potential issue with the active track showing incorrectly on the map
  • Fixed potential issue with Auto Light
  • Fixed potential issue with spell search for waypoints
  • Fixed potential issue with missing data when saving large FIT activities
  • Fixed issues with entering negative elevation values
  • Version: 2.80
  • Datum: 18.10.2012
  • Installation: myDashboard
  • Changes made from version 2.70 to 2.80:
  • Added ability to configure the Up and Down button behavior while viewing data pages (Setup > System > Hot Keys).
  • Added 'Auto Light' feature (Setup > Display > Backlight > Auto Light) with options 'Off', 'After Sunset' and 'Always'. When enabled backlight is automatically activated for key presses, messages, alerts, alarms, and lap banners.
  • Added 5 second option for Backlight Timeout.
  • Improved logging of track points in timed track method (Setup > Tracks > Method > Time) to allow points to be logged without a GPS position.
  • Improved FIT format support. Added markers for start/stop points and current speed/pace for each point.
  • Improved responsiveness of Hot Keys during messages, alerts, alarms, and lap banners.
  • Fixed potential issue with track log points being recorded when tracking has been paused.
  • Fixed potential issue with selecting 'Go' to a chirp location.
  • Fixed issue with proximity alerts only showing distance in miles.
  • Fixed issue with menu options shown for archive tracks.
  • Fixed issue with Demo Mode that could result in decreased battery life while in watch mode.
  • Version: 2.70
  • Datum: 04.10.2012
  • Installation: myDashboard
  • Changes made from version 2.60 to 2.70:
  • Added ability to import Garmin Connect Courses as tracks for navigation, viewing on map, etc. Plan a course at http://connect.garmin.com/courses.
  • Added ability to save FIT track files with more than 10,000 points (now number of points are only limited by memory available on device). Note: Setup>Tracks>Output must be set to 'FIT' only.
  • Added Off Course alert (Alerts>Distance>Off Course).
  • Added ability to configure the Back button behavior while viewing data pages (Setup>System>Hot Keys>Data Page Back).
  • Added ability to set FIT activity type (Setup>Fitness>FIT Activity).
  • Added percentage of max heart rate data fields (HR %MAX, AVG HR %, LAP HR %).
  • Improved time to save track data. Note: the GPX track format results in large file sizes. For faster save times, additional storage space, and if track navigation, etc. is not required for the track being recorded, please consider setting Setup>Tracks>Output to 'FIT'.
  • Improved compatibility of FIT files with some 3rd party websites.
  • Improved display of distance data fields to show additional precision after 10 miles/kilometers.
  • Improved calculation of ascent/descent data.
  • Improved display of speed data field when greater than 100mph/kph.
  • Fixed issues with display of grade data field.
  • Fixed issues with displaying all tracks in the Tracks list.
  • Fixed issues with back button usage in Map pan mode.
  • Fixed issues when downloading chirp data.
  • Fixed issue with Tone settings not being used properly when displaying the low battery message.
  • Fixed issue with backlight that could result in decreased battery life while in watch mode.
  • Version: 2.60
  • Datum: 21.09.2012
  • Installation: myDashboard
  • Changes made from version 2.40 to 2.60:
  • Added review of detailed fitness data when using FIT format. See Tracks>FIT History after saving track data.
  • Added lap distance for each lap in FIT files.
  • Added ability to set the notification type for auto pause and auto lap during setup.
  • Fixed issue with ascent and decent fields.
  • Fixed issue where invalid heart rate and cadence were shown in FIT files when the sensor was not connected.
  • Fixed bike cadence reported in FIT files.
  • Fixed issue with moving time and stopped time.
  • Fixed elevation over distance plot.
  • Fixed track distance, moving average, moving time, stopped time, pace and average speed shown in UltraTrac.
  • Fixed reliability issue with the alarm clock.
  • Fixed issue where some data fields would update when tracking was paused while GPS was still on.
  • Fixed issue where FIT files were not written if you saved via the tracks menu and the output method was set to FIT or GPX/FIT.
  • Fixed issues with editing a proximity alert.
  • Fixed issue where average heart rate and average cadence values were never reset when clearing the track or resetting trip data.
  • Fixed issue where incorrect ascent and descent are reported in FIT files on Garmin Connect
  • Version: 2.40
  • Datum: 07.09.2012
  • Installation: myDashboard
  • Changes made from version 2.30 to 2.40:
  • Added Active Route application in GPS Tools.
  • Added ability to set UltraTrac update as fast as 15 second intervals. ( Battery life varies according to interval )
  • Improved information output in FIT files.
  • Improved data page information in UltraTrac.
  • Fixed issue when exiting pan mode on the map.
  • Version: 2.30
  • Datum:
  • Installation: myDashboard
  • Changes made from version 2.20 to 2.30:
  • Improved course navigation using the compass
  • Improved vertical speed
  • Improved calories calculation
  • Improved navigation ETA/ETE calculations
  • Improved time field in UltraTrac
Garmin fenix2

Garmin fenix2

Garmin Fenix 2 (Bild: Garmin)

Garmin Fenix 2 (Bild: Garmin)

fenix2 Software Versionen: 2.30, 2.40, 2.50, 2.60, 2.90, 3.10, 3.20, 3.30, 3.60, 3.70, 3.80, 3.90, 4.00, 4.10, 4.20, 4.30, 4.40, 4.50

  • Version: 4.50
  • Datum: 25.09.2015
  • Installation: Garmin Express
  • Download: fenix2_450.gcd
  • Changes made from version 4.40 to 4.50:
  • Fixed issue with LiveTrack
  • Fixed issue with import of some workouts
  • Fixed issue with UltraTrac GPS mode in certain scenarios
  • Fixed issue with Area Calculation
  • Fixed Alt Zone time when timezone set to Moscow
  • Version: 4.40
  • Datum: 09.02.2015
  • Installation: Garmin Express
  • Changes made from version 4.30 to 4.40:
  • Improved Android compatibility (requires Android Garmin Connect Mobile 2.8 or higher)
  • Version: 4.30
  • Datum: 23.01.2015
  • Installation: Garmin Express
  • Changes made from version 4.20 to 4.30:
  • Fixed possible shutdown when saving an activity
  • Version: 4.20
  • Datum: 31.12.2014
  • Installation: Garmin Express
  • Changes made from version 4.10 to 4.20:
  • Fixed an issue with the minimum cadence alert
  • Modified cadence alert data entry: for running, cadence is entered in steps per minute (spm); for cycling, cadence is entered in revolutions per minute (rpm)
  • Version: 4.10
  • Datum: 22.12.2014
  • Installation: Garmin Express
  • Changes made from version 4.00 to 4.10:
  • Fixed heart rate zone alerts
  • Fixed pace units selection not being saved
  • Fixed cadence alerts when using Foot Pod or HRM-Run
  • Fixed possible issue with altimeter chart display when GPS is on
  • Fixed possible issue with storm alerts when GPS is on
  • Fixed possible erroneous storm alert when exiting USB mass storage mode
  • Version: 4.00
  • Datum: 23.09.2014
  • Installation: Garmin Express
  • Changes made from version 3.90 to 4.00:
  • Fixed possible issue with multisport session times
  • Fixed Resume Later for multisport activities
  • Fixed erroneous storm alarms after manual barometer calibration
  • Version: 3.90
  • Datum: 10.09.2014
  • Installation: Garmin Express
  • Changes made from version 3.80 to 3.90:
  • Improved smart notification formatting
  • Fixed average power balance calculation
  • Fixed elapsed time calculation for long activities
  • Fixed possible issue with long activities missing data
  • Fixed possible issue when starting an activity where Track Archive Error would appear repeatedly
  • Fixed icon and date overlap on time page when baro trend is enabled
  • Fixed cadence data page when using HRM-Run
  • Version: 3.80
  • Datum: 25.08.2014
  • Installation: Garmin Express
  • Changes made from version 3.70 to 3.80:
  • Added barometer graph scale settings. Settings->Sensors->Barometer->Plot
  • Added barometric pressure trend line. Enable in Settings->General->Time->Time Page->Addl. Data
  • Added storm alerts. Enable in Settings->Sensors->Barometer->Storm Alert
  • Added support for Nautical Units activity setting
  • Improved sensor low battery messages
  • Version: 3.70
  • Datum: 28.07.2014
  • Installation: Garmin Express
  • Changes made from version 3.60 to 3.70:
  • Fixed potential issue where device could become unresponsive during an activity
  • Fixed potential issues with ANT sensor communication consistency
  • Fixed potential issues with Garmin Connect Mobile syncing
  • Version: 3.60
  • Datum: 19.06.2014
  • Installation: Garmin Express
  • Changes made from version 3.30 to 3.60:
  • Added support for Android Smart Notifications
  • Added support for Power Alerts
  • Improved battery life when enabled ANT sensors are no longer present
  • Version: 3.30
  • Datum: 19.06.2014
  • Installation: Garmin Express
  • Changes made from version 3.20 to 3.30:
  • Added support for Android version of Garmin Connect Mobile app (automatic uploads, LiveTrack, faster GPS from downloaded satellite data file, ability to download Courses and Workouts)
  • Version: 3.20
  • Datum: 11.06.2014
  • Installation: Garmin Express
  • Changes made from version 3.10 to 3.20:
  • Added Training Plan feature support (visit www.garminconnect.com to setup and transfer)
  • Added support for Run/Walk alerts
  • Added support for Calorie alerts
  • Fixed potential issues with workout alerts
  • Fixed potential issues with custom activity names
  • Version: 3.10
  • Datum: 23.05.2014
  • Installation: Garmin Express
  • Changes made from version 2.90 to 3.10:
  • Improved reliability of connection and file sync with Garmin Connect Mobile (iOS only)
  • Fixed potential issues with swim pace
  • Fixed intermittent issue with barometer calculation
  • Version: 2.90
  • Datum: 29.04.2014
  • Installation: Garmin Express
  • Changes made from version 2.60 to 2.90:
  • Added pool swim Drill Logging support
  • Added ability to track pool swim rest periods on Garmin Connect
  • Added support for Auto Scroll
  • Improved BLE connectivity
  • Improved swim alerts
  • Improved display of workout time interval to count down instead of up
  • Fixed potential issue with ANT sensors failing to reconnect
  • Fixed potential issue with transfer of workouts from Garmin Connect Mobile
  • Fixed potential issue with battery drain
  • Fixed potential issue with saving Multisport activities
  • Version: 2.60
  • Datum: 07.04.2014
  • Installation: Garmin Express
  • Changes made from version 2.50 to 2.60:
  • Improved ANT sensor connection speed
  • Improved activity saving speed
  • Improved vertical speed stability
  • Improved cadence support
  • Improved pace alert labels
  • Fixed issue with activity recording if resuming after completing a workout
  • Fixed reporting of Multisport activity distance
  • Fixed potential issue with connection to ANT sensors after a Multisport activity transition
  • Version: 2.50
  • Datum: 26.03.2014
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Added swim alerts
  • Improved custom pool length selection experience
  • Fixed issues with cadence data
  • Fixed issue preventing Foot Pod from being located for outdoor activities
  • Fixed issue with Foot Pod calibration
  • Version: 2.40
  • Datum: 18.03.2014
  • Installation: Garmin Express
  • Changes made from version 2.30 to 2.40:
  • Added 4 Fields data page option
  • Improved average ascent, average descent, vertical speed and grade data fields
  • Improved accuracy of final lap time
  • Improved manual sync of activities to Garmin Connect Mobile
  • Fixed issue with wrist based cadence/distance/speed not being used when GPS is not available outdoors
  • Fixed issue with Jumpmaster
  • Version: 2.30
  • Datum: 03.03.2014
  • Installation: Garmin Express
  • Changes made from version 2.20 to 2.30:
  • Added support for Workouts and Courses transferred from Garmin Connect Mobile
  • Improved sync with Garmin Connect Mobile
  • Improved Open Water Swim activity
Garmin fenix3

Garmin fenix3

Garmin Fenix 3 (Bild: Garmin)

Garmin Fenix 3 (Bild: Garmin)

fenix3 Software Versionen: 2.10, 2.20, 2.40, 2.50, 2.80, 2.90, 3.00, 3.10, 3.20, 3.30, 3.40, 3.60, 3.80, 4.00, 4.20, 4.30, 4.40, 4.52 Beta, 4.60, 4.64 Beta, 4.70, 6.05 Beta, 6.06 Beta, 4.90, 6.08 Beta, 6.09 Beta, 6.11 Beta, 6.12 Beta, 6.14 Beta, 5.00, 6.15 Beta, 6.19 Beta, 5.10, 6.24 Beta, 6.27 Beta, 6.31 Beta, 6.32 Beta, 6.40 Beta, 6.42 Beta, 6.50, 6.52 Beta, 6.55 Beta, 6.63 Beta, 6.72 Beta, 6.80, 6.82 Beta, 6.84 Beta, 6.85 Beta, 6.90 Beta, 6.90, 6.91 Beta, 6.92 Beta, 6.93 Beta, 6.95 Beta, 7.00 Beta, 7.00, 7.01 Beta, 7.11 Beta, 7.20 Beta, 7.20, 7.31 Beta, 7.32 Beta, 7.34 Beta, 7.36 Beta, 7.40 Beta, 7.50 Beta, 7.51 Beta, 7.52 Beta, 7.60 Beta, 7.60, 7.61 Beta, 7.62 Beta, 7.64 Beta, 7.84 Beta, 8.00 Beta, 8.00, 8.02 Beta, 8.11 Beta

  • Version: 8.02 Beta, 8.11 Beta
  • Datum: 16.12.2016 (8.11 Beta)
  • Installation:Download
  • Changes made from version 8.02 to 8.11:
  • Fixed an issue where the activity summary information being displayed to the user was incorrect, immediately after a sync.
  • Reverted changes pertaining to Floors climbed that were introduced in previous beta v8.02.
  • Changes made from version 8.00 to 8.02:
  • Added support for CIQ SDK 1.4.1
  • Improved the floors climbed accuracy
  • Version: 8.00
  • Datum: 03.11.2016
  • Installation: Garmin Express
  • Changes made from version 7.60 to 8.00:
  • Added support for CIQ SDK 1.3.4
  • Added support for LiveTrack Auto Start. Once enabled on the Garmin Connect Mobile app (More > LiveTrack), the LiveTrack session will be automatically started when the user begins an activity.
  • Improved the app settings editing experience.
  • Fixed a potential issue where VO2 Max was not being generated for certain users living close to sea level.
  • Fixed a potential issue where the users calories could drop to 0 during an activity.
  • Fixed a potential issue where users VO2 max and Performance Condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP etc.)
  • Fixed a potential issue where the Virtual Partner pace could change during a multisport activity.
  • Fixed a potential issue where the track log for an activity was not being shown in Garmin Connect.
  • Version: 8.00 Beta
  • Datum: 01.11.2016
  • Installation:Download
  • Changes made from version 7.84 to 8.00:
  • Added support for CIQ SDK 1.3.4
  • Added support for LiveTrack Auto Start. Once enabled on the Garmin Connect Mobile app (More > LiveTrack), the LiveTrack session will be automatically started when the user begins an activity.
  • Improved the app settings editing experience.
  • Fixed a potential issue where VO2 Max was not being generated for certain users living close to sea level.
  • Fixed a potential issue where the users calories could drop to 0 during an activity.
  • Fixed a potential issue where users VO2 max and Performance Condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP etc.)
  • Fixed a potential issue where the Virtual Partner pace could change during a multisport activity.
  • Fixed a potential issue where track log is not shown in Garmin Connect.
  • Version: 7.84 Beta
  • Datum: 21.10.2016
  • Installation:Download
  • Changes made from version 7.64 to 7.84:
  • Added support for CIQ SDK 1.3.4.
  • Improved reliability of LiveTrack Auto Start functionality.
  • Fixed a potential issue where VO2 Max was not being generated for certain users living close to sea level.
  • Fixed a potential issue where certain smart notifications would show up blank on the device.
  • Version: 7.64 Beta
  • Datum: 29.09.2016
  • Installation: Download
  • Changes made from version 7.62 to 7.64:
  • Fixed a potential issue where we would attempt to display an invalid date/time for certain iOS calendar notifications.
  • Fixed a potential issue where invalid data would be entered in the activity FIT file during a pool swim, if one were to press the lap button in quick succession.
  • Fixed a potential issue where some data was getting clipped on a particular watch face. (Requires Display FW v3.60)
  • Fixed a potential issue where the users calories could drop to 0 during an activity.
  • Fixed a potential issue where users VO2 max and performance condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP).
  • Version: 7.61 Beta/ 7.62 Beta
  • Datum: 14.09.2016
  • Installation: Download
  • Changes made from version 7.61 to 7.62:
  • Fixed potential issue with missing app settings for the current app
  • Fixed potential issue with Virtual Partner paces changing during a multisport activity
  • Changes made from version 7.60 to 7.61:
  • Added support for CIQ SDK 1.3.3
  • Improved the app settings editing experience
  • Fixed a UI issue on the golf course list page
  • Fixed an issue where incorrect HRV data was being logged to the FIT file
  • Fixed an issue where Garmin Connect Mobile was displaying very high Intensity Minutes values
  • Version: 7.60
  • Datum: 02.09.2016
  • Installation: Garmin Express
  • Changes made from version 7.50 to 7.60:
  • Added support for 'Find My Watch'. (Garmin Connect Mobile App > More > Garmin Devices > Connected Device > Find My Device)
  • Added support for VIRB Ultra 30.
  • Improved support for the new Garmin Face-It mobile app, enabling creation of a Connect IQ watch face with a photo.
  • Improved the warning alert for the last length of a swim workout.
  • Improved the usability of the DogTrack widget.
  • Improved the Last Swim widget to display pace for open water swim activities.
  • Fixed a potential issue where intensity minutes would reset at midnight.
  • Fixed an issue where the units on the DogTrack widget were not in sync with the system unit settings.
  • Fixed an issue where the sport weekly and monthly total list items were getting highlighted even though they are not selectable.
  • Fixed a potential issue with writing developer data through apps that support the Connect IQ 1.3 SDK.
  • Version: 7.60 Beta
  • Datum: 31.08.2016
  • Installation: Download
  • Changes made from version 7.52 to 7.60:
  • Improved the usability of the DogTrack widget.
  • Version: 7.52 Beta
  • Datum: 18.08.2016
  • Installation: Download
  • Changes made from version 7.51 to 7.52:
  • Improved support for the new Garmin Face-It mobile app, enabling creation of a Connect IQ watch face with a photo.
  • Improved the DogTrack widget by adding status icons to indicate whether a dog is treed or on point.
  • Fixed an issue where the units on the DogTrack widget were not in sync with the system unit settings.
  • Fixed an issue where the sport weekly and monthly total list items were getting highlighted even though they are not selectable.
  • Fixed a potential issue with writing developer data through apps that support the Connect IQ 1.3 SDK.

  • Changes made from version 7.50 to 7.51:
  • Added support for 'Find My Watch'. (Garmin Connect Mobile App > More > Garmin Devices > Connected Device > Find My Device)
  • Fixed a potential issue where intensity minutes would reset at midnight for a certain population.
  • Improved the warning alert for the last length of a swim workout.
  • Updated the background color of the tracker widget sub-pages and made them consistent with other widgets.
  • Updated the Last Swim widget to display pace for open water swim activities.
  • Changes made from version 7.36 to 7.40:
  • Improved the user experience of the dog tracker widget.
  • Fixed a potential issue where the CIQ watch face would flicker in between transitions.
  • Version: 7.36 Beta
  • Datum: 02.08.2016
  • Installation: Download
  • Changes made from version 7.34 to 7.36:
  • Improved pace for paddle sports
  • Fixed issue with asset arrow in dog tracking widget
  • Fixed issue with cycling power discrepancies
  • Various bug fixes for Connect IQ 1.3
  • Version: 7.34 Beta
  • Datum: 22.07.2016
  • Installation: Download
  • Changes made from version 7.32 to 7.34:
  • Added additional improvements for CIQ 1.3 SDK.
  • Fixed an issue where calorie data was not being recorded correctly on the subsequent activity, after using a HRM-Tri or HRM-Swim.
  • Fixed a potential issue where invalid characters were being shown on the lap banner page.
  • Fixed a potential issue with golf scorecards.
  • Fixed a potential issue with intensity minutes calculations.
  • Version: 7.32 Beta
  • Datum: 14.07.2016
  • Installation: Download
  • Changes made from version 7.31 to 7.32:
  • Added music and volume controls for iOS with non-native music apps.
  • Improved the precision of 24/7 heart rate data, when being viewed on the Garmin Connect Mobile app.
  • Improved the responsiveness of floors climbed data.
  • Fixed issue where one would see small dropouts on the heart rate widget.
  • Version: 7.31 Beta
  • Datum: 06.07.2016
  • Installation: Download fenix3_tactixBravo_731Beta.zip
  • Changes made from version 7.20 to 7.31:
  • Brought in improvements for how sleep movement could impact intensity minutes calculations.
  • Brought in support for the dog tracker widget
  • Brought In support for CIQ SDK 1.3
  • Fixed an issue where a question mark was being displayed on the swim workout reps page.
  • Fixed an issue where the golf summary information could be incorrect.
  • Fixed an issue where UI elements would appear to be bold when using certain CIQ apps.
  • Fixed a potential issue with swim workouts, when the rest interval is the final step of the said workout
  • Fixed an issue where intensity minutes would reset to 0 after power cycling the watch.
  • Fixed an issue where one could start a navigation activity while running a CIQ app.
  • Fixed an issue where one could access activity settings for a particular FIT sport/sub sport profile, while running a CIQ app.
  • Fixed an issue where the backlight would not come on when using the power key.
  • Fixed an issue where the golf scorecard was displaying values from a discarded scorecard.
  • Fixed translation bugs.
  • Fixed an issue where the time mode was getting over-written by Connect, especially using the Military time setting.
  • Version: 7.20
  • Datum: 13.06.2016
  • Installation: Garmin Express
  • Download fenix3_tactixBravo_quatix3_720.rgn
  • Changes made from version 7.00 to 7.20:
  • Added support for accessing other data screens while in a swim workout rest interval.
  • Improved accuracy of distance and lap counting for Pool Swim.
  • Improved Auto Lock behavior to avoid locking while in use.
  • Improved the reliability of foot pod calibration.
  • Improved ETA and ETE estimates when navigating a course.
  • Improved label and background consistency across all widgets.
  • Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
  • Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
  • Fixed an issue where distance data fields for SUP were using incorrect precision and units.
  • Fixed a potential issue with high battery drain in watch mode.
  • Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
  • Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
  • Fixed a potential display issue with one of the analog watch faces. (Requires Display update 3.50)
  • Version: 7.20 Beta
  • Datum: 10.06.2016
  • Installation: Download fenix3_tactixBravo_720Beta.zip
  • Changes made from version 7.13 to 7.20:
  • Fixed a potential issue with swim workouts, when the rest interval is the final step of the said workout.
  • Version: 7.11 Beta
  • Datum: 26.05.2016
  • Installation: Download fenix3_tactixBravo_711Beta.zip
  • Changes made from version 7.01 to 7.11:
  • Added support for accessing other data screens while in a swim workout rest interval.
  • Improved Auto Lock behavior to avoid locking while in use.
  • Improved label and background consistency across all widgets.
  • Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
  • Fixed an issue where the interval SWOLF and stroke rate fields were labelled incorrectly.
  • Fixed an issue where distance data fields for SUP were using incorrect precision and units.
  • Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
  • Fixed an issue where high values for intensity minutes were getting clipped on the Intensity Minutes widget.
  • Fixed an issue where the multisport transition page was displaying information in the wrong color.
  • Version: 7.01 Beta
  • Datum: 12.05.2016
  • Installation: Download fenix3_tactixBravo_701Beta.zip
  • Changes made from version 7.00 to 7.01:
  • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
  • Fixed a potential issue with footpod calibration.
  • Fixed a potential issue with high battery drain in watch mode.
  • Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
  • Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
  • Fixed a potential issue where the user was not directed back to the time and date page correctly, after receiving a Lactate Threshold estimation.
  • Fixed potential BLE/ANT communication issues. (Requires BLE/ANT update 3.51)
  • Version: 7.00
  • Datum: 04.05.2016
  • Installation: Garmin Express
  • Download fenix3_tactixBravo_quatix3_700.rgn
  • Changes made from version 6.90 to 7.00:
  • Added support for CIQ SDK 1.2.6.
  • Added support for Achievements. (Summary of personal records available after an activity is saved, and while still on the saved activity summary page.)
  • Added support to turn off activity monitoring Goal Alerts. (Settings > Activity Monitoring > Goal Alert)
  • Added support for post activity download of Heart Rate data from HRM-Tri and HRM-Swim sensors. (History > Activity > Download Heart Rate)
  • Added support to calibrate altimeter at extreme altitudes.
  • Added floors climbed history to the steps widget.
  • Added the heading bug to the elevation plot page.
  • Added support for saving a waypoint from the Dual Grid page.
  • Added support for displaying status of GPS EPO data to the About page. (Settings > System > About > Scroll to the EPO Status Page, Note: downloaded EPO data will not always be stored on the device file system)
  • Added support for viewing more than 100 Saved Locations on the device.
  • Added support for Walk App (Settings > Apps > Walk).
  • Added support for Swimrun App (Settings > Apps > Swimrun).
  • Added additional backlight settings: a 4 second timeout and a 5% backlight level.
  • Improved distance scrolling on the Project Waypoint page.
  • Improved Bluetooth to phone connection reliability. (Requires BLE/ANT FW 3.50)
  • Improved auto zoom during waypoint navigation.
  • Improved the readability of golf course names on the golf course list page.
  • Improved accuracy of floors climbed data
  • Fixed a potential issue where Intensity Minutes were not being calculated correctly for devices paired with a Heart Rate sensor.
  • Fixed an issue where the Auto Scroll setting was not available for paddle sports activity profiles.
  • Fixed a potential issue with Timer alarms not working as expected if Do Not Disturb was enabled.
  • Fixed a potential issue where the device could crash when saving a swim activity with HRM Tri data.
  • Version: 7.00 Beta
  • Datum: 28.04.2016
  • Installation: Download fenix3_tactixBravo_700Beta.zip
  • Changes made from version 6.95 to 7.00:
  • Fixed a potential issue, where the display update prompt would not allow the SW updates to complete successfully.
  • Fixed a potential issue where the total time screen within a multisport activity could be blank.
  • Fixed an issue where the Indoor Bike auto lap setting was getting modified after a SW update.
  • Version: 6.95 Beta
  • Datum: 22.04.2016
  • Installation: Download fenix3_tactixBravo_695Beta.zip
  • Changes made from version 6.93 to 6.95:
  • Added support for CIQ 1.2.6.
  • Added support for Achievements. (Summary of personal records available after an activity is saved, and while still on the saved activity summary page.)
  • Added support to turn off activity monitoring Goal Alerts. (Settings > Activity Monitoring > Goal Alert)
  • Added support to calibrate altimeter at extreme altitudes.
  • Added support for Walk App (Settings > Apps > Walk).
  • Added support for Swimrun App (Settings > Apps > Swimrun).
  • Added additional backlight settings: a 4 second timeout and a 5% backlight level.
  • Improved the readability of golf course names on the golf course list page.
  • Fixed a potential issue where activity history had a ghost entry after deleting all activities.
  • Fixed an issue where the performance condition page was clipping the value being displayed.
  • Fixed a potential issue with deleting saved locations.
  • Fixed a potential issue with vertical distance to destination and glide ratio data fields, while navigating a course.
  • Version: 6.93 Beta
  • Datum: 07.04.2016
  • Installation: Download fenix3_tactixBravo_693Beta.zip
  • Changes made from version 6.92 to 6.93:
  • Added support for post activity download of Heart Rate data from HRM-Tri and HRM-Swim sensors. (History > Activity > Download Heart Rate)
  • Added additional information to the workout timer page.
  • Added support for displaying status of GPS EPO data to the About page. (Settings > System > About > Scroll to the EPO Status Page, Note: downloaded EPO data will not always be stored on the device file system)
  • Fixed a potential issue with viewing more than 100 nearest Saved Locations.
  • Fixed a potential issue where GPS EPO downloads were not being applied as expected.
  • Fixed a potential issue where Intensity Minutes were not being calculated correctly for devices paired with a Heart Rate sensor.
  • Fixed a potential issue with Timer alarms not working as expected if Do Not Disturb was enabled.
  • Fixed a potential issue with the instantaneous distance data field for paddle sports.
  • Fixed a potential issue where the Lactate Threshold value was not always available in the My Stats menu.
  • Fixed an issue where the Auto Scroll setting was not available for paddle sports activity profiles.
  • Fixed a potential issue where the Back button wouldn’t take the user back to the activity loop during Ski/Board activities.
  • Fixed a potential issue with auto zoom not working as expected during Waypoint navigation.
  • Version: 6.92 Beta
  • Datum: 29.03.2016
  • Installation: Download fenix3_tactixBravo_692Beta.zip
  • Changes made from version 6.91 to 6.92:
  • Added support for saving a waypoint from the Dual Grid page
  • Improved distance scrolling on the Project Waypoint page
  • Improved reliability of heart rate data on the Heart Rate graph widget
  • Improved accuracy of distance and lap counting for Pool Swim in certain situations
  • Improved accuracy of floors climbed and resting heart rate data
  • Version: 6.91 Beta
  • Datum: 11.03.2016
  • Installation: Download fenix3_tactixBravo_691Beta.zip
  • Changes made from version 6.90 to 6.91:
  • Added floors climbed history to the steps widget.
  • Added the heading bug to the elevation plot page.
  • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
  • Improved Bluetooth to phone connection reliability. (Requires BLE/ANT FW 3.34.)
  • Fixed a potential issue where the device could crash when saving a swim activity with HRM Tri data.
  • Fixed an issue where metronome wasn’t working correctly for the Tactical activity.
  • Version: 6.90
  • Datum: 10.03.2016
  • Installation: Garmin Express
  • Download fenix3_tactixBravo_quatix3_690.rgn
  • Changes made from version 6.80 to 6.90:
  • Added support for Elevation Plot navigation data screen (Settings > Navigation > Data Screens > Elevation Plot). Note: this screen should give a 'glanceable' indication of effort remaining along the course being navigated. It shows completed (in green) and future (in blue, if available in the course) altitude data plotted over the distance of the navigation. Ascent fields are also displayed for current accumulation and the amount remaining to destination. Plan your next adventure using the Course creation tool at garminconnect.com!
  • Added support for reviewing elevation history for an activity. (History > Activities > Choose an activity > Elevation Plot. The data field represents total ascent for the activity.)
  • Added support for Auto Lock. (Settings > System > Auto Lock)
  • Added support for configuring Wi-Fi as a Hot Key option. (Settings > System > Hot Keys > Choose a key > Wi-Fi)
  • Improved the colors used for sensor bar status icons.
  • Improved the accuracy of floors climbed data.
  • Fixed an issue where paddle sport activities could not be used for workouts that were classified as 'Other' on Garmin Connect.
  • Fixed a potential issue where one could not change the crank length of a third party power meter.
  • Fixed a potential issue where the device could fail to calculate HARP for a HALO jump.
  • Fixed a potential issue where par and bogey information on golf summary could be incorrect.
  • Fixed a potential issue where a users current CIQ watch face could change, if they had multiple CIQ watch faces and were upgrading from a software version before 6.50.
  • Fixed a potential issue where certain widgets could disappear from the widget loop after a software update.
  • Fixed a potential issue where Foot Pod was being used as a distance source in Bike Indoor activities.
  • Version: 6.90 Beta
  • Datum: 08.03.2016
  • Installation: Download fenix3_tactixBravo_690Beta.zip
  • Changes made from version 6.85 to 6.90:
  • Fixed a potential issue where map information for certain activities in history would fail to load.
  • Fixed a potential issue where the user was getting directed to an incorrect page, when no elevation data was present for an activity.
  • Version: 6.85 Beta
  • Datum: 03.03.2016
  • Installation: Download fenix3_tactixBravo_685Beta.zip
  • Changes made from version 6.84 to 6.85:
  • Improved the accuracy of total ascent displayed on the elevation plot page.
  • ixed potential issue with elevation plot where the green section didn’t align well with the blue section.
  • Fixed a potential issue where we could fail to calculate HARP for a HALO jump.
  • Fixed a potential issue where the watch would reboot when navigating an activity.
  • Fixed an issue where a filtered app list for navigation was displaying the incorrect icons.
  • Fixed the default auto lap distance for SUP.
  • Version: 6.82 Beta
  • Datum: 26.02.2016
  • Installation: Download fenix3_tactixBravo_684Beta.zip
  • Changes made from version 6.82 to 6.84:
  • Added support for Elevation Plot navigation data screen (Settings > Navigation > Data Screens > Elevation Plot). Note: this screen should give a 'glanceable' indication of effort remaining along the course being navigated. It shows completed (in green) and future (in blue, if available in the course) altitude data plotted over the distance of the navigation. Ascent fields are also displayed for current accumulation and the amount remaining to destination. Plan your next adventure using the Course creation tool at garminconnect.com!
  • Added support for reviewing elevation history for an activity. (History > Activities > Choose an activity > Elevation Plot. The data field represents total ascent for the activity.)
  • Added support for configuring Wi-Fi as a Hot Key option. (Settings > System > Hot Keys > Choose a key > Wi-Fi)
  • Improved visibility of the lap number on the lap banner page.
  • Improved Lock Device and Auto Lock behavior to only show the full hint text banner until it has been acknowledged once.
  • Fixed missing crank length setting for P1 power meters.
  • Fixed a potential issue where the watch would crash while using the 'Resume Later' option.
  • Fixed an issue where average stroke rate and SWOLF were incorrect on the Last Sport widget for a swim activity.
  • Fixed an issue where paddle sport activities could not be used for workouts that were classified as 'Other' on Garmin Connect.
  • Fixed an issue where auto lap distance for rowing was not being displayed in meters.
  • Fixed an issue where par and bogey information on golf summary was incorrect.
  • Version: 6.82 Beta
  • Datum: 18.02.2016
  • Installation: Download fenix3_tactixBravo_682Beta.zip
  • Changes made from version 6.72 to 6.82:
  • Added support for Auto Lock. (Settings > System > Auto Lock)
  • Added support for previewing backlight intensity as it is modified.
  • Improved the colors used for sensor bar status icons.
  • Improved the accuracy of floors climbed data.
  • Fixed a potential issue where the current CIQ watch face could change if one had multiple CIQ watch faces and was upgrading from before software version 6.50.
  • Fixed a potential issue where certain widgets could disappear from the widget loop after a software update.
  • Fixed a critical issue where the watch would reboot when trying to Track Back a really long activity.
  • Fixed an issue where auto lap distance for rowing was not being displayed in meters.
  • Fixed a potential issue where a user could configure their lap alert banners to choose 'Interval Time/Pace/Distance' data fields for non-Open Water Swim profiles.
  • Fixed a potential issue where Foot Pod was being used as a distance source in indoor Bike activities.
  • Fixed a potential issue where one couldn’t toggle the GPS setting for Row activities after profile creation.
  • Fixed a potential issue where the steps history graph was displaying certain days twice.
  • Version: 6.80
  • Datum: 09.02.2016
  • Installation: Garmin Express
  • Download fenix3_tactixBravo_quatix3_680.rgn
  • Changes made from version 6.50 to 6.80:
  • Added support for Connect IQ SDK 1.2.2.
  • Added Intensity Minutes widget (Settings > Widgets). Note: requires a connection to a Heart Rate Strap to accrue Vigorous minutes.
  • Restored support for the (optional) manual entry of Sleep mode (Settings > Activity Tracking).
  • Added support for 'Auto Do Not Disturb'. (Power Menu > Do Not Disturb > Sleep Time) Sleep and wake up times can be setup through Garmin Connect Mobile.
  • Added support for Speed/Pace and Heart Rate audio prompts. (Requires Garmin Connect Mobile App app version 3.2.1, select More > Settings > Device > Audio Prompts to configure)
  • Improved list of app activities shown during navigation and interval training.
  • Fixed an issue where users were seeing auto lap information during swim activities.
  • Fixed potential issue with battery drain when using Analog watch faces. (Requires display update 3.20)
  • Fixed a potential issue with display of day/month on the watch face. (Requires display update 3.20)
  • Fixed a potential issue with the back light coming on for Smart Notifications, after placing the watch in 'Do Not Disturb' mode.
  • Fixed a potential issue with the vibration setting getting affected after a software update.
  • Version: 6.72 Beta
  • Datum: 02.01.2016
  • Installation: Download fenix3_tactixBravo_672Beta.zip
  • Changes made from version 6.63 to 6.72:
  • Added support for Speed/Pace and Heart Rate audio prompts. (Requires Garmin Connect Mobile App app version 3.2.1, select More > Settings > Device > Audio Prompts to configure)
  • Improved list of app activities shown during navigation and interval training.
  • Fixed an issue where users were seeing auto lap information during swim activities.
  • Fixed potential issue with battery drain when using Analog watch faces. (Requires display update 3.11)
  • Version: 6.63 Beta
  • Datum: 22.01.2016
  • Installation: Download fenix3_tactixBravo_663Beta.zip
  • Changes made from version 6.55 to 6.63:
  • Improved average stroke rate calculations for paddle sports.
  • Fixed an issue where incorrect values for distance per stroke were being stored in paddle sports FIT files.
  • Fixed a potential issue where the device might crash due to excessive flooding of smart notifications.
  • Fixed a potential issue where device time would not update correctly, when crossing time zones and connected to the Garmin Connect Mobile app.
  • Fixed a potential issue where uninstalling the current Connect IQ watch face from the Garmin Connect Mobile app would not work as expected.
  • Fixed a potential issue where the performance condition alert could pop up while running a Connect IQ app.
  • Fixed a potential issue where Recovery Advisor setting was not being respected.
  • Version: 6.55 Beta
  • Datum: 15.01.2016
  • Changes made from version 6.52 to 6.55:
  • Added support for 'Auto Do Not Disturb'. (Power Menu > Do Not Disturb > Sleep Time) Sleep and wake up times can be setup through Garmin Connect Mobile.
  • Fixed a potential issue where calorie counts were being over-reported after disconnecting from a heart rate strap.
  • Fixed a potential issue where one could lose their daily accrued intensity minutes when power cycling the unit.
  • Fixed a potential issue with Stride Length being over-reported.
  • Fixed a potential issue with the unit rebooting after transferring Workouts from Garmin Connect.
  • Fixed a potential issue with the record screen being blank after ending an activity.
  • Made improvements to session average distance per stroke for Standup paddle boarding and Rowing.
  • Fixed a potential issue with single sport profile creation.
  • Version: 6.52 Beta
  • Datum: 08.01.2016
  • Changes made from version 6.42 to 6.52:
  • Added support for CIQ 1.2.2.
  • Added Intensity Minutes widget (Settings > Widgets). Note: requires a connection to a Heart Rate Strap to accrue Vigorous minutes.
  • Restored support for the (optional) manual entry of Sleep mode (Settings > Activity Tracking).
  • Fixed a potential issue with display of day/month on the watch face. (Requires display update 3.01)
  • Fixed a potential issue with the vibration setting getting affected after a software update.
  • Fixed a potential issue with the Floors climbed goal being reported as 0.
  • Fixed a potential issue with the backlight coming on for Smart Notifications, after placing the watch in 'Do Not Disturb' mode.
  • Fixed a potential issue where the unit would crash when using paddle sport activities within a multisport profile.
  • Fixed an issue where steps were not showing up on the last sport widget for a walking activity.
  • Made other minor UX bug fixes and improvements.
  • Version: 6.50
  • Datum: 05.01.2016
  • Installation: Garmin Express
  • Changes made from version 5.10 to 6.50:
  • Added support for Row App. New features include 500m pace, stroke rate, stroke count, distance per stroke, upgrades to virtual partner, stroke rate alerts, and 'every beat' metronome option. Garmin Connect support coming soon!
  • Added support for Row Indoor App. New features include stroke rate, stroke count, stroke rate alerts, and 'every beat' metronome option. Garmin Connect support coming soon!
  • Added support for Standup Paddleboarding (SUP) App. New features include stroke rate, stroke count, distance per stroke, upgrades to virtual partner, stroke rate alerts, and 'every beat' metronome option. Garmin Connect support coming soon!
  • Added support for Golf App. New features include download of courses through Garmin Connect Mobile, distance to front/middle/back of green, layup distances, measure shot, in-round scorecard, odometer/round timer, and scorecard uploads to Garmin Connect.
  • Added support for Project Waypoint App (Settings > Apps > Project Wpt).
  • Added support for Tactical App (Settings > Apps > Add New).
  • Added support for Jumpmaster App (Settings > Apps > Add New).
  • Added support for the Advanced Running Dynamics metric: Ground Contact Time Balance. This feature measures your running symmetry and appears as a percentage of your total ground contact time. While developing and testing running dynamics, the Garmin team found correlations between injuries and greater imbalances with certain runners. For many runners, ground contact time balance tends to deviate further from 50-50 when running up or down hills. Most running coaches agree that a symmetrical running form is good. Elite runners tend to have quick and balanced strides. You can watch the color gauge or data field during your run or view the summary on your Garmin Connect account after your run. (Requires HRM-Run v. 6.60, HRM-Tri v. 4.20)
  • Added support for the Advanced Running Dynamics metric: Stride Length. This feature measures the length of your stride from one footfall to the next. It is measured in meters. (Requires HRM-Run v. 6.60, HRM-Tri v. 4.20)
  • Added support for the Advanced Running Dynamics metric: Vertical Ratio. This feature provides the cost-benefit ratio of vertical oscillation to stride length, serving as one indicator of a runner’s efficiency. (Requires HRM-Run v. 6.60, HRM-Tri v. 4.20)
  • Added support for the Lactate Threshold feature (Main Menu > My Stats > Lactate Threshold). This estimates the level of effort at which fatigue rapidly increases in terms of a runner’s heart rate and pace. This includes the lactate threshold guided test, which is a structured activity that will output the user’s lactate threshold heart rate (LTHR) and threshold pace (T-Pace). Other features include LTHR autodetect and HR zones based on %LTHR. The guided test and autodetect require a physical HR strap and can only be calculated by running outdoors. A typical LTHR value is 90% of Max HR. Unlike VO2 max, which can be calculated from HR and pace data at a variety of speeds, autodetect and the guided test requires some time during the activity where the user’s HR is around their LTHR.
  • Added support for the Performance Condition feature. This provides a real-time fitness-level measurement relative to a runner’s average baseline, which indicates performance readiness for the day’s workout or race. This feature has two parts: a popup that occurs between 6 and 20 minutes into your outdoor running or cycling activity, and a data field that displays the same information. This feature uses heart rate, heart rate variability, and pace to tell the user how well they are performing. The performance condition popup replaces the Recovery Check feature, but Recovery Time is not affected. Performance condition requires a physical HR strap.
  • Added support for the Stress Score app. This uses heart rate variability to assess the user’s overall physiological stress. This feature requires a physical HR strap. Devices upgrading from software versions 5.10 or earlier should see this listed in the app list if a HRM has been previously paired. Otherwise, this app can be enabled through the main menu by going to Settings > Apps > Stress Score. It is important to carefully read the instructions presented on the watch before beginning the test for best results.
  • Added ABC widget which combines Altimeter, Barometer and Compass data (Settings > Widgets). Note: press START to view altimeter/barometer plots and compass view.
  • Added Steps widget with floors climbed (Settings > Widgets). Note: Steps replaces the previous Wellness widget. Sleep mode is now automatic and can be setup via Garmin Connect and Garmin Connect Mobile.
  • Added My Day widget (Settings > Widgets).
  • Added Golf widget (Settings > Widgets).
  • Added Last Run widget (Settings > Widgets). Note: press START to view history.
  • Added Last Ride widget (Settings > Widgets). Note: press START to view history.
  • Added Last Swim widget (Settings > Widgets). Note: press START to view history.
  • Added Last Sport widget (Settings > Widgets). Note: press START to view history.
  • Added Calories widget (Settings > Widgets).
  • Added Do Not Disturb feature (press & hold LIGHT). Note: Use during sleep if no notifications or alerts are desired.
  • Added support for a new HR gauge data screen (Settings > Apps > Activity > Data Screens > HR Gauge).
  • Added support for audio lap alerts in Garmin Connect Mobile. (GCM > Garmin Devices > Fenix 3 > Audio Alerts > Lap Alerts)
  • Added support for viewing GPS state before starting a workout.
  • Added support for a new 'MOB' (Man Overboard) hot key option. (Settings > System > Hot Keys)
  • Added support for a new 'Dual Grid' hot key option. (Settings > System > Hot Keys)
  • Added new Digital watch face Layout option (showing step goal progress and move bar)
  • Added new Digital watch face Seconds Style (Requires Display software v. 3.00)
  • Added new Hands and Background analog watch face options (Requires Display software v. 3.00).
  • Version: 6.42 Beta
  • Datum: 31.12.2015
  • Installation:
    1. Infos: fenix 3 Beta-Updates
  • Changes made from version 6.40 to 6.42:
  • Fixed potential issue with battery drain when using certain watch face combinations.
  • Version: 6.40 Beta
  • Datum: 30.12.2015
  • Changes made from version 6.32 to 6.40:
  • Fixed potential stability issues when viewing lap details
  • Fixed issue with dismissing a low battery message if device is locked
  • Fixed potential issue with creating an invalid watch face configuration
  • Fixed issue with playing a tone when stopping an activity with 'In App' tone setting
  • Fixed issue with backlight gesture setting not saving across watch restarts
  • Fixed issue with alarms failing to sound when Do Not Disturb is enabled
  • Version: 6.32 Beta
  • Datum: 23.12.2015
  • Installation:
    1. Infos: fenix 3 Beta-Updates
  • Changes made from version 6.31 to 6.32:
  • Added support for viewing activity history from Run/Bike/Swim and last sport widgets. (Widget > Start)
  • Added support for viewing GPS state before starting a workout.
  • Fixed an issue where pace would be dashed out on the Last Run and Last Ride widgets in certain use cases.
  • Fixed an issue where the dual grid page was using incorrect defaults.
  • Fixed an issue where the heart rate gauge background in the activity loop, was not respecting the current activity setting.
  • Reverted ability to auto-lap during a workout
  • Version: 6.31 Beta
  • Datum: 19.12.2015
  • Changes made from version 6.27 to 6.31:
  • Added support for a new 'MOB' (Man Overboard.) hot key option. (Settings > System > Hot Keys)
  • Added support for a new 'Dual Grid' hot key option. (Settings > System > Hot Keys)
  • Fixed an issue where the activity history displayed dashed out items.
  • Fixed a potential reboot when removing the device from the charge clip.
  • Fixed a potential reboot while charging.
  • Fixed a potential reboot while transitioning from the watch face to a widget.
  • Fixed a potential reboot while reordering applications via Garmin Connect Mobile.
  • Made other minor UI code improvements and bug fixes.
  • Version: 6.27 Beta
  • Datum: 19.12.2015
  • Installation:
    1. Infos: fenix 3 Beta-Updates
  • Changes made from version 6.24 to 6.27:
  • Added Steps widget (Settings > Widgets). Note: Steps replaces the previous Wellness widget
    /li>
  • Added My Day widget (Settings > Widgets)
  • Added Golf widget (Settings > Widgets)
  • Added Last Run widget (Settings > Widgets)
  • Added Last Ride widget (Settings > Widgets)
  • Added Last Swim (Settings > Widgets)
  • Added Last Sport widget (Settings > Widgets)
  • Added Calories widget (Settings > Widgets)
  • Added support for Jumpmaster App (Settings > Apps > Add New)
  • Added support for Tactical App (Settings > Apps > Add New)
  • Added new Digital watch face Layout option (showing step goal progress and move bar)
  • Added new Digital watch face Seconds Style (Requires Display update 2.95)
  • Added new Digital watch face Seconds Style (Requires Display update 2.95)
  • Added Do Not Disturb feature (press & hold LIGHT)
  • Added support for golf scorecard uploads
  • Version: 6.24 Beta
  • Datum: 09.12.2015
  • Installation: Download
  • Changes made from version 6.19 to 6.24:
  • Added support for Row App. New features include 500m pace, stroke rate, stroke count, distance per stroke, upgrades to virtual partner, stroke rate alerts, and 'every beat' metronome option.
  • Added support for Row Indoor App. New features include stroke rate, stroke count, stroke rate alerts, and 'every beat' metronome option.
  • Added support for Standup Paddleboarding (SUP) App. New features include stroke rate, stroke count, distance per stroke, upgrades to virtual partner, stroke rate alerts, and 'every beat' metronome option.
  • Added support for Golf App. New features include download of courses through Garmin Connect Mobile, distance to front/middle/back of green, layup distances, measure shot, scorecard, and odometer/round timer.
  • Added support for Project Waypoint App (Settings > Apps > Project Wpt.).
  • Added support for a new ABC widget which combines Altimeter, Barometer and Compass data. Note: previous altimeter/barometer plots and compass view will be accessible through this new widget (Settings > Widgets > ABC).
  • Added support for a new HR gauge data screen (Settings > Apps > Activity > Data Screens > HR Gauge).
  • Added new Hands and Background analog watch face options (requires Display firmware version 2.92).
  • Added support for audio lap alerts in Garmin Connect Mobile. (GCM > Garmin Devices > Fenix 3 > Audio Alerts > Lap Alerts)
  • Fixed potential issues with battery discharge beyond the typical rate.
  • Fixed a potential issue with Off-course alerts not working for certain use cases.
  • Installation:
    1. Connect your Fenix3 to your computer using the USB cable. Download and unzip Fenix3_Beta.zip. Place the gupdate.rgn file in the \GARMIN folder of your device’s internal storage drive.
    2. To update display software, place the 292_gup2051.bin file in the \Garmin\RemoteSW folder of your device’s internal storage drive. Rename the file to gup2051.bin.
    3. Disconnect your device from the computer, approve the update on the watch, and wait for the update to finish.
    4. If you would like to revert to a previous public release software, follow the above steps but place the gupdate_XYY.rgn file in the \GARMIN folder. Rename the file to gupdate.rgn before disconnecting your device. NOTE: If you revert to an older version of software, all of your settings will be reset to defaults.
  • Version: 5.10
  • Datum: 24.11.2015
  • Installation: Garmin Express
  • Changes made from version 5.00 to 5.10:
  • Fixed potential issue with unexpected battery drain.
  • Fixed potential issue reconnecting to ANT+ sensors.
  • Version: 6.19 Beta
  • Datum: 19.11.2015
  • Installation: Download
  • Changes made from version 6.15 to 6.19:
  • Added support for Advanced Running Dynamics. These include: Ground Contact Time Balance, Stride Length and Vertical Ratio (Requires HRM-Run v.6.60, HRM-Tri v. 4.20)
  • Improved reliability of altitude during activities
  • Fixed potential issue with auto lap during workouts
  • Fixed potential issue with the location field layout for certain position formats
  • Fixed potential issues with battery discharge beyond the typical rate when Bluetooth is turned off
  • Fixed potential issue reconnecting to ANT+ sensors
  • Version: 6.15 Beta
  • Datum: 06.11.2015
  • Installation: Download
  • Changes made from version 6.14 to 6.15:
  • Added support for viewing altitude on the watch face. Note: This requires Display update v2.91, see installation instructions below.
  • Further improvements to altimeter and barometer accuracy in watch mode (when not performing a GPS activity). Note: Settings > Sensors > Altimeter >
  • Calibrate or press START from the Altimeter widget to calibrate the Altimeter to a known altitude.
  • Improved reliability of Bluetooth manual syncs for certain use cases.
  • Fixed potential issues with altitude inaccuracies at low speeds during a GPS activity.
  • Fixed a potential issue where the button lock banner could prevent viewing of smart notifications.
  • Fixed a potential issue with Wi-Fi syncs.
  • Fixed a potential issue with VO2 Max when the Foot Pod Speed setting was set to 'Always'.
  • Fixed a potential issue where activity files with HR data would fail to upload.
  • Version: 5.00
  • Datum: 05.11.2015
  • Installation: Garmin Express
  • Changes made from version 4.90 to 5.00:
  • Added support for Connect IQ SDK 1.2.1.
  • Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation).
  • Added support for 'repeating' sports in a multisport profile (Settings > Apps > Multi Sport Profile > Repeat). This is useful for events such as 'Swimrun'. (https://en.wikipedia.org/wiki/Swimrun).
  • Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature.
  • Added new Hands and Background analog watch face options (requires Display firmware version 2.90).
  • Improved consistency and accuracy of altimeter auto calibration (performed during a GPS activity). Notes: GPS and manual calibration points will be used to determine the best overall calibration possible. A secondary step when acquiring a GPS fix at activity start will help denote a more accurate fix for altitude purposes (yellow to green ring indication). Settings > Sensors > Altimeter > Auto Cal. is now an On/Off setting as the 'Once' and 'Continuous' settings are no longer necessary. Use Settings > Sensors > Altimeter > Calibrate to calibrate the Altimeter to a known altitude.
  • Improved altimeter and barometer accuracy in watch mode (when not performing a GPS activity). Note: use Settings > Sensors > Altimeter > Calibrate or press START from the Altimeter widget to calibrate the Altimeter to a known altitude.
  • Improved vibration profiles to be differentiated based on alert type.
  • Improved reliability of 'Weather' widget on iOS.
  • Improved ability to detect time zone changes without a GPS fix (requires connection to Garmin Connect Mobile app and time set to 'Auto' on device, Settings > System > Time > Set Time).
  • Improved activity tracking step calculation accuracy for certain use cases.
  • Fixed potential issue with a Foot Pod sensor dropping out as a source for speed.
  • Fixed an issue where key presses would not work, if a low battery notification was received when the unit was locked.
  • Fixed potential issue with manual altimeter calibration during a GPS activity.
  • Fixed issue with Tempe sensor connectivity.
  • Fixed a potential issue with exiting the 'Find Phone' app.
  • Fixed a potential issue with storm alerts not working in certain use cases.
  • Fixed a potential issue with a Foot Pod sensor being incorrectly used as the source for distance accrual.
  • Fixed issue with storing a large number of saved locations.
  • Version: 6.14 Beta
  • Datum: 30.10.2015
  • Installation: Download
  • Changes made from version 6.12 to 6.14:
  • Fixed an issue where user’s alerts would get corrupted when upgrading software. Note: Any alert created after 6.01 will be removed and will need to be added again.
  • Fixed a potential issue where the watch would randomly reboot, while playing a vibration.
  • Fixed a potential issue with setting up the crank length for non Vector power meters.
  • Version: 6.12 Beta
  • Datum: …10.2015
  • Installation: Download
  • Changes made from version 6.11 to 6.12:
  • Fix for foot pod dropping as speed source
  • Version: 6.11 Beta
  • Datum: 23.10.2015
  • Installation: Download
  • Changes made from version 6.09 to 6.11:
  • Added support for Connect IQ SDK 1.2.1.
  • Further improvements for consistency and accuracy of altimeter auto calibration (performed during a GPS activity).
  • Improved activity tracking step calculation accuracy for certain use cases.
  • Fixed an issue where key presses would not work, if a low battery notification was received when the unit was locked.
  • Due to intermittent reliability issues, reverted pool swim algorithm changes to those found in the current public release (4.90).
  • Version: 6.09 Beta
  • Datum: 19.10.2015
  • Installation: Download
  • Changes made from version 6.08 to 6.09:
  • Improved consistency and accuracy of altimeter auto calibration (performed during a GPS activity). Notes: GPS and manual calibration points will be used to determine the best overall calibration possible. A secondary step when acquiring a GPS fix at activity start will help denote a more accurate fix for altitude purposes (yellow to green ring indication). Settings > Sensors > Altimeter > Auto Cal. is now an On/Off setting as the 'Once' and 'Continuous' settings are no longer necessary. Use Settings > Sensors > Altimeter > Calibrate to calibrate the Altimeter to a known altitude.
  • Further improvements to altimeter and barometer accuracy in watch mode (when not performing a GPS activity). Note: Settings > Sensors > Altimeter > Calibrate or press START from the Altimeter widget to calibrate the Altimeter to a known altitude.
  • Fixed potential issue with manual altimeter calibration during a GPS activity.
  • Fixed issue with tempe connectivity.
  • Version: 6.08 Beta
  • Datum: 08.10.2015
  • Installation: Download
  • Changes made from version 6.06 to 6.08:
  • Improved altimeter and barometer accuracy in watch mode (when not performing a GPS activity). Note: use Settings > Sensors > Altimeter > Calibrate or press START from the Altimeter widget to calibrate the Altimeter to a known altitude.
  • Improved vibration profiles to be differentiated based on alert type.
  • Improved reliability of 'Weather' widget on iOS.
  • Fixed a potential issue with exiting the 'Find Phone' app.
  • Fixed a potential issue with storm alerts not working in certain use cases.
  • Version: 4.90
  • Datum: 01.10.2015
  • Installation: Garmin Express
  • Changes made from version 4.70 to 4.90:
  • Added new Hands and Background analog watch face options (requires Display firmware version 2.90).
  • Fixed a potential issue with Footpod being incorrectly used as the source for distance accrual.
  • Fixed potential issue when receiving a large number of notifications using iOS 9.
  • Version: 6.06 Beta
  • Datum: 30.09.2015
  • Installation: Download
  • Changes made from version 6.05 to 6.06:
  • Added support for Connect IQ SDK 1.2.0.
  • Fixed a potential issue with Footpod being incorrectly used as the source for distance accrual.
  • Version: 6.05 Beta
  • Datum: 24.09.2015
  • Installation: Download
  • Changes made from version 4.70 to 6.05:
  • Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation).
  • Added support for 'repeating' sports in a multisport profile (Settings > Apps > Multi Sport Profile > Repeat). This is useful for events such as 'Swimrun'. (https://en.wikipedia.org/wiki/Swimrun).
  • Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature.
  • Added new Hands and Background analog watch face options (requires Display firmware version 2.90).
  • Added support for CIQ 1.1.4.
  • Improved ability to detect time zone changes without a GPS fix (requires connection to Garmin Connect Mobile app and time set to 'Auto' on device, Settings > System > Time > Set Time).
  • Improved pool swim distance algorithm (see beta release notes above).
  • Fixed issue with storing a large number of saved locations.
  • Fixed potential issue when receiving a large number of notifications using iOS 9.
  • Installation
    1. Connect your Fenix3 to your computer using the USB cable. Download and unzip Fenix3_Beta.zip. Place the gupdate.rgn file in the \GARMIN folder of your device’s internal storage drive. Disconnect your device from the computer, approve the update on the watch, and wait for the update to finish. If you would like to revert to a previous public release software, follow the above steps but place the gupdate_XYY.rgn file in the \GARMIN folder. Rename the file to gupdate.rgn before disconnecting your device. NOTE: If you revert to an older version of software, all of your settings will be reset to defaults.
    2. Place the display firmware file (gup2051.bin, v2.90, which is also included in the zip file) in the GARMIN\RemoteSW\ folder of your device’s internal storage.
  • Version: 4.70
  • Datum: 14.09.2015
  • Installation: Garmin Express
  • Changes made from version 4.60 to 4.70:
  • Fixed a potential issue with Scheduled workouts.
  • Fixed a potential issue with heart rate zones not persisting across software updates. This change will take effect with subsequent software updates.
  • Version: 4.64 Beta
  • Datum: 09.09.2015
  • Installation: Download
  • Changes made from version 4.52 to 4.64:
  • Fixed a potential issue with Scheduled workouts.
  • Fixed a potential issue with heart rate zones getting lost in between software updates.
  • Installation: If you would like to test the Heart Rate Zones change, please first update to software version 4.63 using the gupdate_463.rgn file (rename to gupdate.rgn once copied to your Fenix 3 \Garmin directory). You will need to resend your Heart Rate Zones from Garmin Connect to your Fenix 3 once updated to 4.63. Verify your Heart Rate Zones are accurate and then upgrade to software version 4.64. This process will then allow you to verify the Heart Rate Zones are no longer lost.
  • Version: 4.60
  • Datum: 03.09.2015
  • Installation: Garmin Express
  • Changes made from version 4.40 to 4.60:
  • Added ability to configure foot pod speed and distance (Settings > Sensors > Foot Pod).
  • Added support for setting up compass user magnetic variation (Settings > Sensors > Compass > North Ref.).
  • Added the option to configure the navigation heading bug (Settings > Navigation > Heading Bug).
  • Added support for editing altitude and position for Saved Locations (Navigation > Saved Locations).
  • Fixed a potential issue with navigating activities.
  • Fixed a potential issue with distance calculations during workouts.
  • Fixed potential issues with syncing activity tracking data.
  • Version: 4.52 Beta
  • Datum: 28.08.2015
  • Installation: Download
  • changes made from version 4.40 to 4.52:
  • Added ability to configure foot pod speed and distance (Settings > Sensors > Foot Pod).
  • Added support for setting up compass user magnetic variation (Settings > Sensors > Compass > North Ref.).
  • Added the option to configure the navigation heading bug (Settings > Navigation > Heading Bug).
  • Added support for editing altitude and position for Saved Locations (Navigation > Saved Locations).
  • Fixed a potential issue with navigating activities.
  • Fixed a potential issue with distance calculations during workouts.
  • Fixed potential issues with syncing activity tracking data.
  • Installation: Connect your Fenix3 to your computer using the USB cable. Download and unzip Fenix3_Beta.zip. Place the gupdate.rgn file in the \GARMIN folder of your device’s internal storage drive. Disconnect your device from the computer, approve the update on the watch, and wait for the update to finish. If you would like to revert to the last public release software, follow the above steps but place the gupdate_440.rgn file in the \GARMIN folder. Rename the file to gupdate.rgn before disconnecting your device. NOTE: If you revert to an older version of software, all of your settings will be reset to defaults
  • Version: 4.40
  • Datum: 14.08.2015
  • Installation: Garmin Express
  • Changes made from version 4.20 to 4.40:
  • Added Course navigation mode (Settings > Navigation > Type). A HSI Compass will be utilized on the Guide data page when navigating in this mode.
  • Added support for deleting all saved locations (Navigation > Saved Locations > Delete All).
  • Added support for automatic saving of an activity after 25 minutes without an action on the Save/Resume/Discard options.
  • Improved support of edited locations from BaseCamp.
  • Improved low battery notifications.
  • Improved the Swim Drill Log page.
  • Fixed a potential issue with navigating courses.
  • Fixed an issue with utilizing the setting for Swim Stroke Type Detection.
  • Note: If updating from 4.30, the app list will be reset to defaults. All custom activity apps created before this update will be cleared as well.
  • Version: 4.30
  • Datum: 12.08.2015
  • Installation: Garmin Express
  • Changes made from version 4.20 to 4.30:
  • Added Course navigation mode (Settings > Navigation > Type). An HSI Compass will be utilized on the Guide data page when navigating in this mode.
  • Added support for deleting all saved locations (Navigation > Saved Locations > Delete All).
  • Added support for automatic saving of an activity after 25 minutes without an action on the Save/Resume/Discard options.
  • Improved support of edited locations from BaseCamp.
  • Improved low battery notifications.
  • Improved the Swim Drill Log page.
  • Fixed a potential issue with navigating courses.
  • Fixed an issue with utilizing the setting for Swim Stroke Type Detection.
  • Version: 4.20
  • Datum: 30.07.2015
  • Installation: Garmin Express
  • Changes made from version 4.00 to 4.20:
  • Fixed a potential issue with the 'Set a Target' Training option.
  • Fixed an issue with displaying smart notifications while sleeping.
  • Fixed an issue with customization of data fields on 'Lap Alert' and 'Rest Screen' data screens.
  • Version: 4.00
  • Datum: 23.07.2015
  • Installation: Garmin Express
  • Changes made from version 3.80 to 4.00:
  • Added support for HRM-Tri and HRM-Swim.
  • Added support for Smart Notification Actions (interact with the incoming notifications directly from the pop-up or within the Notifications widget, e.g. clear a message or reject an incoming call).
  • Added 'Find My Phone' app (added at the end of the app list).
  • Added a heading arrow indicator to data pages when in navigation mode.
  • Added support for advanced VIRB remote (compatible with VIRB X/XE: control camera settings, display additional status information).
  • Added advanced alarm clock features (multiple alarms, recurring options, notification customization).
  • Added support for 'Auto' backlight mode (options are now available to configure backlight separately for keys, alerts and gestures: Settings > System > Backlight).
  • Added setting to control Bluetooth connection alerts (Settings > Bluetooth > Alerts).
  • Improved ascent and descent calculations.
  • Improved pairing time with the tempe sensor.
  • Fixed issue with saving of lap ascent values.
  • Fixed potential issue with steps being lost during an activity.
  • Fixed potential issues with heart rate sensor connection reliability.
  • Version: 3.80
  • Datum: 08.07.2015
  • Installation: Garmin Express
  • Changes made from version 3.60 to 3.80:
  • Fix potential issue with GPS acquisition, when resuming an activity.
  • Version: 3.60
  • Datum: 23.06.2015
  • Installation: Garmin Express
  • Changes made from version 3.40 to 3.60:
  • Improved GPS tracking performance (Requires GPS Software 2.90. Note: after applying GPS software updates, for best results please allow the device to track GPS signals continuously for 10 to 15 minutes. This one-time process will allow the device to re-accumulate satellite information lost in the update process).
  • Improved GPS distance accumulation (requires GPS Software 2.90).
  • Added support for Connect IQ SDK 1.1.3.
  • Fixed potential issues with 'Resume Later' app option.
  • Version: 3.40
  • Datum: 16.06.2015
  • Installation: Garmin Express
  • Changes made from version 3.30 to 3.40:
  • Added support for Walking sport type (Settings > Apps > Add New).
  • Added support for configuring LAP key behavior (Settings > Apps).
  • Added support for Connect IQ SDK 1.1.2.
  • Fixed issue with Open Water app settings
  • Fixed potential issue with GPS acquisition when using the My Workouts feature.
  • Fixed potential issue with alarm settings
  • Version: 3.30
  • Datum: 26.05.2015
  • Installation: Garmin Express
  • Changes made from version 3.20 to 3.30:
  • Fixed potential issue with the latest time zone update.
  • Version: 3.20
  • Datum: 17.04.2015
  • Installation: Garmin Express
  • Changes made from version 3.10 to 3.20:
  • Added Hot Keys press-and-hold START and BACK key customization (Settings > System > Hot Keys).
  • Added Back to Start option for straight-line navigation back to activity start.
  • Improved Connect IQ stability.
  • Improved pace stability at low speeds.
  • Fixed issue with import of elevation of saved locations from GPX files.
  • Fixed issue with display of 3 digit speeds on ski data pages.
  • Fixed potential device lockup when exiting watch mode.
  • Version: 3.10
  • Datum: 27.03.2015
  • Installation: Garmin Express
  • Changes made from version 3.00 to 3.10:
  • Improved Connect IQ experience and stability.
  • Fixed issue with updating Barometer plot scale.
  • Version: 3.00
  • Datum: 19.03.2015
  • Installation: Garmin Express
  • Changes made from version 2.90 to 3.00:
  • Added Foot Pod auto calibration support.
  • Improved Connect IQ experience and stability.
  • Fixed potential issue with heading data fields.
  • Version: 2.90
  • Datum: 09.03.2015
  • Installation: Garmin Express
  • Changes made from version 2.80 to 2.90:
  • Fixed a potential issue with starting custom apps.
  • Version: 2.80
  • Datum:
  • Installation:
  • Changes made from version 2.50 to 2.80:
  • Added Music Controls widget.
  • Added support for Connect IQ apps and widgets.
  • Fixed an issue with power data fields.
  • Version: 2.50
  • Datum: 11.02.2015
  • Installation: Garmin Express
  • Changes made from version 2.20 to 2.50:
  • Added access to sensor-specific settings from Compass, Altimeter, and Barometer widgets (press the START key).
  • Added lock keys feature (hold the LIGHT key).
  • Version: 2.40
  • Datum: 09.02.2015
  • Installation: Garmin Express
  • Changes made from version 2.20 to 2.40:
  • Added access to sensor-specific settings from Compass, Altimeter, and Barometer widgets (press the START key).
  • Added lock keys feature (hold the LIGHT key).
  • Version: 2.20
  • Datum: 23.01.2015
  • Installation: Garmin Express
  • Version: 2.10
  • Datum: 21.01.2015
  • Installation: Garmin Express

17. Garmin fenix 3 HR

fenix 3 HR Software Versionen: 2.91 Beta, 2.92 Beta, 2.93 Beta, 2.95 Beta, 3.00 Beta, 3.00, 3.01 Beta, 3.11 Beta, 3.13 Beta, 3.20

  • Version: 3.20
  • Datum: 13.06.2016
  • Installation: Garmin Express
  • Download: fenix3HR_320.rgn
  • Changes made from version 3.00 to 3.20:
  • Added support for accessing other data screens while in a swim workout rest interval.
  • Improved accuracy of distance and lap counting for Pool Swim.
  • Improved Auto Lock behavior to avoid locking while in use.
  • Improved the reliability of foot pod calibration.
  • Improved ETA and ETE estimates when navigating a course.
  • Improved label and background consistency across all widgets.
  • Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
  • Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
  • Fixed an issue where distance data fields for SUP were using incorrect precision and units.
  • Fixed a potential issue with high battery drain in watch mode.
  • Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
  • Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
  • Fixed a potential display issue with one of the analog watch faces. (Requires Display update 3.50)
  • Fixed a potential issue with wrist HR failing to update. (Requires WHR update 2.60)
    • Version: 3.13 Beta
    • Datum: 02.06.2016
    • Installation: Download
    • Download: fenix3HR_313Beta.zip
    • Changes made from version 3.11 to 3.13:
    • Improved accuracy of distance and lap counting for Pool Swim.
    • Improved ETA and ETE estimates when navigating a course.
    • Improved distinction between raceable course for training and courses for navigation.
    • Fixed labels on altimeter and barometer graphs in ABC widget.
    • Fixed issue with page color after a rest interval in a Pool Swim.
    • Version: 3.11 Beta
    • Datum: 26.05.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_311Beta.zip
    • Changes made from version 3.01 to 3.11:
    • Added support for accessing other data screens while in a swim workout rest interval.
    • Improved Auto Lock behavior to avoid locking while in use.
    • Improved label and background consistency across all widgets.
    • Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
    • Fixed an issue where the interval SWOLF and stroke rate fields were labelled incorrectly.
    • Fixed an issue where distance data fields for SUP were using incorrect precision and units.
    • Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
    • Fixed an issue where high values for intensity minutes were getting clipped on the Intensity Minutes widget.
    • Fixed an issue where the multisport transition page was displaying information in the wrong color.
    • Version: 3.01 Beta
    • Datum: 12.05.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_301Beta.zip
    • Changes made from version 3.00 to 3.01:
    • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
    • Fixed a potential issue with footpod calibration.
    • Fixed a potential issue with high battery drain in watch mode.
    • Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
    • Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
    • Fixed a potential issue where the user was not directed back to the time and date page correctly, after receiving a Lactate Threshold estimation.
    • Fixed a potential issue where optical heart rate data was being logged to the activity file for a Swim activity, when used within a multisport profile.
    • Fixed potential BLE/ANT communication issues. (Requires BLE/ANT update 3.51)
    • Version: 3.00
    • Datum: 04.05.2016
    • Garmin Express
    • Download: fenix3HR_300.rgn
    • Changes made from version 2.20 to 3.00:
    • Added support for CIQ SDK 1.2.6.
    • Added support for Achievements. (Summary of personal records available after an activity is saved, and while still on the saved activity summary page.)
    • Added support to turn off activity monitoring Goal Alerts. (Settings > Activity Monitoring > Goal Alert)
    • Added support for post activity download of Heart Rate data from HRM-Tri and HRM-Swim sensors. (History > Activity > Download Heart Rate)
    • Added support to calibrate altimeter at extreme altitudes.
    • Added floors climbed history to the steps widget.
    • Added the heading bug to the elevation plot page.
    • Added support for saving a waypoint from the Dual Grid page.
    • Added support for displaying status of GPS EPO data to the About page. (Settings > System > About > Scroll to the EPO Status Page, Note: downloaded EPO data will not always be stored on the device file system)
    • Added support for viewing more than 100 Saved Locations on the device.
    • Added support for Walk App (Settings > Apps > Walk).
    • Added support for Swimrun App (Settings > Apps > Swimrun).
    • Added additional backlight settings: a 4 second timeout and a 5% backlight level.
    • Improved distance scrolling on the Project Waypoint page.
    • Improved Bluetooth to phone connection reliability. (Requires BLE/ANT FW 3.50)
    • Improved auto zoom during waypoint navigation.
    • Improved the readability of golf course names on the golf course list page.
    • Improved reliability and accuracy of Heart Rate data. (Requires WHR FW 2.30 (10.02.21))
    • Improved accuracy of floors climbed data
    • Fixed a potential issue where the device could crash when saving a swim activity with HRM Tri data.
    • Fixed a potential issue where Intensity Minutes were not being calculated correctly for devices paired with a Heart Rate sensor.
    • Fixed an issue where the Auto Scroll setting was not available for paddle sports activity profiles.
    • Fixed a potential issue with Timer alarms not working as expected if Do Not Disturb was enabled.
    • Version: 3.00 Beta
    • Datum: 28.04.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_300Beta.zip
    • Changes made from version 2.95 to 3.00:
    • Fixed a potential issue, where the display update prompt would not allow the SW updates to complete successfully.
    • Fixed a potential issue where the total time screen within a multisport activity could be blank.
    • Fixed an issue where the Indoor Bike auto lap setting was getting modified after a SW update.
    • Version: 2.95 Beta
    • Datum: 22.04.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_295Beta.zip
    • Changes made from version 2.93 to 2.95:
    • Added support for CIQ 1.2.6.
    • Added support for Achievements. (Summary of personal records available after an activity is saved, and while still on the saved activity summary page.)
    • Added support to turn off activity monitoring Goal Alerts. (Settings > Activity Monitoring > Goal Alert)
    • Added support to calibrate altimeter at extreme altitudes.
    • Added support for Walk App (Settings > Apps > Walk).
    • Added support for Swimrun App (Settings > Apps > Swimrun).
    • Added additional backlight settings: a 4 second timeout and a 5% backlight level.
    • Improved the readability of golf course names on the golf course list page.
    • Fixed a potential issue where activity history had a ghost entry after deleting all activities.
    • Fixed an issue where the performance condition page was clipping the value being displayed.
    • Fixed a potential issue with deleting saved locations.
    • Fixed a potential issue with vertical distance to destination and glide ratio data fields, while navigating a course.
    • Fixed a potential issue where optical Heart Rate was being used for Lactate threshold calculations.
    • Fixed a potential issue with calorie calculations when using a HRM Tri.
    • Version: 2.93 Beta
    • Datum: 07.04.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_293Beta.zip
    • Changes made from version 2.92 to 2.93:
    • Added support for post activity download of Heart Rate data from HRM-Tri and HRM-Swim sensors. (History > Activity > Download Heart Rate)
    • Added additional information to the workout timer page.
    • Added support for displaying status of GPS EPO data to the About page. (Settings > System > About > Scroll to the EPO Status Page, Note: downloaded EPO data will not always be stored on the device file system)
    • Fixed a potential issue with viewing more than 100 nearest Saved Locations.
    • Fixed a potential issue where GPS EPO downloads were not being applied as expected.
    • Fixed a potential issue where Intensity Minutes were not being calculated correctly for devices paired with a Heart Rate sensor.
    • Fixed a potential issue with Timer alarms not working as expected if Do Not Disturb was enabled.
    • Fixed a potential issue with the instantaneous distance data field for paddle sports.
    • Fixed a potential issue where the Lactate Threshold value was not always available in the My Stats menu.
    • Fixed an issue where the Auto Scroll setting was not available for paddle sports activity profiles.
    • Fixed a potential issue where the Back button wouldn’t take the user back to the activity loop during Ski/Board activities.
    • Fixed a potential issue with auto zoom not working as expected during Waypoint navigation.
    • Fixed potential display issues with the Heart Rate Widget plot.
    • Version: 2.92 Beta
    • Datum: 29.03.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_292Beta.zip
    • Changes made from version 2.91 to 2.92:
    • Added support for saving a waypoint from the Dual Grid page.
    • Improved distance scrolling on the Project Waypoint page.
    • Improved reliability of heart rate data on the Heart Rate graph widget.
    • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
    • Improved accuracy of floors climbed and resting heart rate data.
    • Version: 2.91 Beta
    • Datum: 22.03.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_291Beta.zip
    • Changes made from version 2.20 to 2.91:
    • Added support for Elevation Plot navigation data screen (Settings > Navigation > Data Screens > Elevation Plot). Note: this screen should give a 'glanceable' indication of effort remaining along the course being navigated. It shows completed (in green) and future (in blue, if available in the course) altitude data plotted over the distance of the navigation. Ascent fields are also displayed for current accumulation and the amount remaining to destination. Plan your next adventure using the Course creation tool at garminconnect.com!
    • Added support for reviewing elevation history for an activity. (History > Activities > Choose an activity > Elevation Plot. The data field represents total ascent for the activity.)
    • Added support for Auto Lock. (Settings > System > Auto Lock)
    • Added floors climbed history to the steps widget.
    • Added support for configuring Wi-Fi as a Hot Key option. (Settings > System > Hot Keys > Choose a key > Wi-Fi)
    • Added the heading bug to the elevation plot page.
    • Added support for previewing backlight intensity as it is modified.
    • Improved the accuracy and reliability of optical heart rate data. (Requires WHR FW 2.17)
    • Improved Bluetooth to phone connection reliability. (Requires BLE/ANT FW 3.34.)
    • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
Garmin fenix3 HR

17. Garmin fenix 3 HR

fenix 3 HR Software Versionen: 2.91 Beta, 2.92 Beta, 2.93 Beta, 2.95 Beta, 3.00 Beta, 3.00, 3.01 Beta, 3.11 Beta, 3.13 Beta, 3.20, 3.31 Beta, 3.32 Beta, 3.34 Beta, 3.36 Beta, 3.40 Beta, 3.51 Beta, 3.50, 3.52 Beta, 3.60 Beta, 3.60, 3.62 Beta, 3.64 Beta, 3.84 Beta, 3.90 Beta, 4.00 Beta, 4.00, 4.02 Beta, 4.11 Beta

  • Version: 4.02 Beta, 4.11 Beta
  • Datum: 16.12.2016 (4.11 Beta)
  • Installation: Download
  • Changes made from version 4.02 to 4.11:
  • Fixed an issue where the activity summary information being displayed to the user was incorrect, immediately after a sync.
  • Reverted changes pertaining to Floors climbed that were introduced in previous beta v4.02.
  • Changes made from version 4.00 to 4.02:
  • Added support for CIQ SDK 1.4.1
  • Improved the floors climbed accuracy
  • Version: 4.00
  • Datum: 03.11.2016
  • Installation: Garmin Express
  • Changes made from version 3.60 to 4.00:
  • Added support for CIQ SDK 1.3.4
  • Added support for LiveTrack Auto Start. Once enabled on the Garmin Connect Mobile app (More > LiveTrack), the LiveTrack session will be automatically started when the user begins an activity.
  • Improved the app settings editing experience.
  • Fixed a potential issue where VO2 Max was not being generated for certain users living close to sea level.
  • Fixed a potential issue where the users calories could drop to 0 during an activity.
  • Fixed a potential issue where users VO2 max and Performance Condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP etc.)
  • Fixed a potential issue where the Virtual Partner pace could change during a multisport activity.
  • Fixed a potential issue where the track log for an activity was not being shown in Garmin Connect.
  • Version: 4.00 Beta
  • Datum: 01.11.2016
  • Installation: Download
  • Changes made from version 3.84 to 4.00:
  • Added support for CIQ SDK 1.3.4
  • Added support for LiveTrack Auto Start. Once enabled on the Garmin Connect Mobile app (More > LiveTrack), the LiveTrack session will be automatically started when the user begins an activity.
  • Improved the app settings editing experience.
  • Improved Heart Rate consistency on the Heart Rate history widget.
  • Fixed a potential issue where the users calories could drop to 0 during an activity.
  • Fixed a potential issue where users VO2 max and Performance Condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP etc.)
  • Fixed a potential issue where the Virtual Partner pace could change during a multisport activity.
  • Fixed an issue preventing automatic Foot Pod calibration.
  • Fixed a potential issue where VO2 Max was not being generated for certain users living close to sea level.
  • Fixed a potential issue where track log is not shown in Garmin Connect.
  • Version: 3.84 Beta
  • Datum: 21.10.2016
  • Installation: Download
  • Changes made from version 3.64 to 3.84:
  • Added support for CIQ SDK 1.3.4.
  • Improved reliability of LiveTrack Auto Start functionality.
  • Fixed a potential issue where VO2 Max was not being generated for certain users living close to sea level.
  • Fixed a potential issue where certain smart notifications would show up blank on the device.
  • Version: 3.64 Beta
  • Datum: 29.09.2016
  • Installation: Download
  • Changes made from version 3.62 to 3.64:
  • Fixed a potential issue where we would attempt to display an invalid date/time for certain iOS calendar notifications.
  • Fixed a potential issue where invalid data would be entered in the activity FIT file during a pool swim, if one were to press the lap button in quick succession.
  • Fixed a potential issue where some data was getting clipped on a particular watch face. (Requires Display FW v3.60)
  • Fixed a potential issue where the users calories could drop to 0 during an activity.
  • Fixed a potential issue where users VO2 max and performance condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP).
  • Version: 3.62 Beta
  • Datum: 14.09.2016
  • Installation: Download
  • Changes made from version 3.61 to 3.62:
  • Fixed issue preventing automatic Foot Pod calibration
  • Fixed potential issue with missing app settings for the current app
  • Fixed potential issue with Virtual Partner paces changing during a multisport activity
  • Version: 3.60
  • Datum: 02.09.2016
  • Installation: Garmin Express
  • Changes made from version 3.50 to 3.60:
  • Added support for 'Find My Watch'. (Garmin Connect Mobile App > More > Garmin Devices > Connected Device > Find My Device)
  • Added support for VIRB Ultra 30.
  • Improved support for the new Garmin Face-It mobile app, enabling creation of a Connect IQ watch face with a photo.
  • Improved the warning alert for the last length of a swim workout.
  • Improved the usability of the DogTrack widget.
  • Improved the Last Swim widget to display pace for open water swim activities.
  • Fixed a potential issue where intensity minutes would reset at midnight.
  • Fixed an issue where the units on the DogTrack widget were not in sync with the system unit settings.
  • Fixed an issue where the sport weekly and monthly total list items were getting highlighted even though they are not selectable.
  • Fixed a potential issue with writing developer data through apps that support the Connect IQ 1.3 SDK.
  • Version: 3.60 Beta
  • Datum: 31.08.2016
  • Installation: Download
  • Changes made from version 3.52 to 3.60:
  • Improved the usability of the DogTrack widget.
  • Version: 3.52 Beta
  • Datum: 18.08.2016
  • Installation: Download
  • Changes made from version 3.51 to 3.52:
  • Improved support for the new Garmin Face-It mobile app, enabling creation of a Connect IQ watch face with a photo.
  • Improved the DogTrack widget by adding status icons to indicate whether a dog is treed or on point.
  • Fixed an issue where the units on the DogTrack widget were not in sync with the system unit settings.
  • Fixed an issue where the sport weekly and monthly total list items were getting highlighted even though they are not selectable.
  • Fixed a potential issue with writing developer data through apps that support the Connect IQ 1.3 SDK.
  • Version: 3.50
  • Datum: 08.08.20168
  • Installation: Garmin Express
  • Changes made from version 3.20 to 3.50:
  • Added support for Connect IQ 1.3.0 SDK. See the Connect IQ 1.3.0 SDK for a list of new features.
  • Added support for Apple Media Service – users can now control any active music player, e.g. Spotify, as well as volume. (requires iOS 8.0 and higher)
  • Added support for phone apps to subscribe for more frequent data updates.
  • Added support for the dog tracker widget. (Settings > Widgets > DogTrack)
  • Added support for broadcasting wrist heart rate data over ANT to other devices during an activity. (Settings > Sensors > Wrist Heart Rate > Broadcast HR > In App)
  • Improved wrist heart rate performance. (Requires WHR 2.70)
  • Improved the accuracy of pace data for paddle sports.
  • Improved how sleep movement could impact intensity minutes calculations.
  • Improved the responsiveness of floors climbed data.
  • Fixed potential issues with golf scorecards and summary information.
  • Fixed an issue with the intensity minutes widget potentially showing dashes for high intensity minute values.
  • Fixed a potential issue with access to navigation while running a Connect IQ app.
  • Fixed a potential issue with access to app settings while running a Connect IQ app.
  • Fixed a potential issue with the backlight failing to turn on when using the LIGHT key.
  • Fixed an issue where calorie data was not being recorded correctly on the subsequent activity, after using an HRM-Tri or HRM-Swim.
  • Fixed a potential issue with swim workouts.
  • Version: 3.51 Beta
  • Datum: 12.08.2016
  • Installation: Download
  • Changes made from version 3.40 to 3.51:
  • Added support for 'Find My Watch'. (Garmin Connect Mobile App > More > Garmin Devices > Connected Device > Find My Device)
  • Fixed a potential issue where intensity minutes would reset at midnight for a certain population.
  • Improved wrist heart rate display responsiveness prior to lock.
  • Improved the warning alert for the last length of a swim workout.
  • Improved scaling of data on the heart rate graph widget.
  • Updated the background color of the tracker widget sub-pages and made them consistent with other widgets.
  • Updated the Last Swim widget to display pace for open water swim activities.
  • Version: 3.40 Beta
  • Datum: 08.2016
  • Installation: Download
  • Changes made from version 3.36 to 3.40:
  • Improved the user experience of the dog tracker widget.
  • Fixed an issue where step goal alert notifications were not creating a vibe.
  • Fixed a potential issue where the CIQ watch face would flicker in between transitions.

 

  • Version: 3.36 Beta
  • Datum: 02.08.2016
  • Installation: Download
  • Changes made from version 3.34 to 3.36:
  • Improved pace for paddle sports
  • Fixed issue with asset arrow in dog tracking widget
  • Fixed issue with cycling power discrepancies
  • Various bug fixes for Connect IQ 1.3
  • Version: 3.34 Beta
  • Datum: 22.07.2016
  • Installation:Download
  • Changes made from version 3.32 to 3.34:
  • Added support for broadcasting wrist heart rate data during an activity. (Settings > Sensors > Wrist Heart Rate > Broadcast HR > In App)
  • Added additional improvements for CIQ 1.3 SDK.
  • Improved wrist heart rate performance. (upgrade to 2.61 – GUP2415.GCD)
  • Fixed a potential issue where invalid characters were being shown on the lap banner page.
  • Fixed a potential issue with golf scorecards.
  • Fixed a potential issue with intensity minutes calculations.
  • Fixed an issue where calorie data was not being recorded correctly on the subsequent activity, after using an HRM-Tri or HRM-Swim.
  • Version: 3.32 Beta
  • Datum: 14.07.2016
  • Installation: Download
  • Changes made from version 3.31 to 3.32:
  • Added music and volume controls for iOS with non-native music apps.
  • Improved the precision of 24/7 heart rate data, when being viewed on the Garmin Connect Mobile app.
  • Improved the responsiveness of floors climbed data.
  • Fixed issue where one would see small dropouts on the heart rate widget.
  • Version: 3.31 Beta
  • Datum: 06.07.2016
  • Installation: Download
  • Download: fenix3HR_331Beta.zip
  • Changes made from version 3.20 to 3.31:
  • Brought in improvements for how sleep movement could impact intensity minutes calculations.
  • Brought in support for the dog tracker widget.
  • Brought In support for CIQ SDK 1.3.
  • Fixed an issue where a question mark was being displayed on the swim workout reps page.
  • Fixed an issue where the golf summary information could be incorrect.
  • Fixed an issue where UI elements would appear to be bold when using certain CIQ apps.
  • Fixed an issue where a question mark was being displayed on the HR broadcast page.
  • Fixed a potential issue with swim workouts, when the rest interval is the final step of the said workout.
  • Fixed an issue where intensity minutes would reset to 0 after power cycling the watch.
  • Fixed an issue where one could start a navigation activity while running a CIQ app.
  • Fixed an issue where one could access activity settings for a particular FIT sport/sub sport profile, while running a CIQ app.
  • Fixed an issue where the backlight would not come on when using the power key.
  • Fixed an issue where the golf scorecard was displaying values from a discarded scorecard.
  • Fixed translation bugs.
  • Fixed an issue where the time mode was getting over-written by Connect, especially using the Military time setting.
  • Version: 3.20
  • Datum: 13.06.2016
  • Installation: Garmin Express
  • Download: fenix3HR_320.rgn
  • Changes made from version 3.00 to 3.20:
  • Added support for accessing other data screens while in a swim workout rest interval.
  • Improved accuracy of distance and lap counting for Pool Swim.
  • Improved Auto Lock behavior to avoid locking while in use.
  • Improved the reliability of foot pod calibration.
  • Improved ETA and ETE estimates when navigating a course.
  • Improved label and background consistency across all widgets.
  • Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
  • Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
  • Fixed an issue where distance data fields for SUP were using incorrect precision and units.
  • Fixed a potential issue with high battery drain in watch mode.
  • Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
  • Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
  • Fixed a potential display issue with one of the analog watch faces. (Requires Display update 3.50)
  • Fixed a potential issue with wrist HR failing to update. (Requires WHR update 2.60)
    • Version: 3.13 Beta
    • Datum: 02.06.2016
    • Installation: Download
    • Download: fenix3HR_313Beta.zip
    • Changes made from version 3.11 to 3.13:
    • Improved accuracy of distance and lap counting for Pool Swim.
    • Improved ETA and ETE estimates when navigating a course.
    • Improved distinction between raceable course for training and courses for navigation.
    • Fixed labels on altimeter and barometer graphs in ABC widget.
    • Fixed issue with page color after a rest interval in a Pool Swim.
    • Version: 3.11 Beta
    • Datum: 26.05.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_311Beta.zip
    • Changes made from version 3.01 to 3.11:
    • Added support for accessing other data screens while in a swim workout rest interval.
    • Improved Auto Lock behavior to avoid locking while in use.
    • Improved label and background consistency across all widgets.
    • Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
    • Fixed an issue where the interval SWOLF and stroke rate fields were labelled incorrectly.
    • Fixed an issue where distance data fields for SUP were using incorrect precision and units.
    • Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
    • Fixed an issue where high values for intensity minutes were getting clipped on the Intensity Minutes widget.
    • Fixed an issue where the multisport transition page was displaying information in the wrong color.
    • Version: 3.01 Beta
    • Datum: 12.05.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_301Beta.zip
    • Changes made from version 3.00 to 3.01:
    • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
    • Fixed a potential issue with footpod calibration.
    • Fixed a potential issue with high battery drain in watch mode.
    • Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
    • Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
    • Fixed a potential issue where the user was not directed back to the time and date page correctly, after receiving a Lactate Threshold estimation.
    • Fixed a potential issue where optical heart rate data was being logged to the activity file for a Swim activity, when used within a multisport profile.
    • Fixed potential BLE/ANT communication issues. (Requires BLE/ANT update 3.51)
    • Version: 3.00
    • Datum: 04.05.2016
    • Garmin Express
    • Download: fenix3HR_300.rgn
    • Changes made from version 2.20 to 3.00:
    • Added support for CIQ SDK 1.2.6.
    • Added support for Achievements. (Summary of personal records available after an activity is saved, and while still on the saved activity summary page.)
    • Added support to turn off activity monitoring Goal Alerts. (Settings > Activity Monitoring > Goal Alert)
    • Added support for post activity download of Heart Rate data from HRM-Tri and HRM-Swim sensors. (History > Activity > Download Heart Rate)
    • Added support to calibrate altimeter at extreme altitudes.
    • Added floors climbed history to the steps widget.
    • Added the heading bug to the elevation plot page.
    • Added support for saving a waypoint from the Dual Grid page.
    • Added support for displaying status of GPS EPO data to the About page. (Settings > System > About > Scroll to the EPO Status Page, Note: downloaded EPO data will not always be stored on the device file system)
    • Added support for viewing more than 100 Saved Locations on the device.
    • Added support for Walk App (Settings > Apps > Walk).
    • Added support for Swimrun App (Settings > Apps > Swimrun).
    • Added additional backlight settings: a 4 second timeout and a 5% backlight level.
    • Improved distance scrolling on the Project Waypoint page.
    • Improved Bluetooth to phone connection reliability. (Requires BLE/ANT FW 3.50)
    • Improved auto zoom during waypoint navigation.
    • Improved the readability of golf course names on the golf course list page.
    • Improved reliability and accuracy of Heart Rate data. (Requires WHR FW 2.30 (10.02.21))
    • Improved accuracy of floors climbed data
    • Fixed a potential issue where the device could crash when saving a swim activity with HRM Tri data.
    • Fixed a potential issue where Intensity Minutes were not being calculated correctly for devices paired with a Heart Rate sensor.
    • Fixed an issue where the Auto Scroll setting was not available for paddle sports activity profiles.
    • Fixed a potential issue with Timer alarms not working as expected if Do Not Disturb was enabled.
    • Version: 3.00 Beta
    • Datum: 28.04.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_300Beta.zip
    • Changes made from version 2.95 to 3.00:
    • Fixed a potential issue, where the display update prompt would not allow the SW updates to complete successfully.
    • Fixed a potential issue where the total time screen within a multisport activity could be blank.
    • Fixed an issue where the Indoor Bike auto lap setting was getting modified after a SW update.
    • Version: 2.95 Beta
    • Datum: 22.04.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_295Beta.zip
    • Changes made from version 2.93 to 2.95:
    • Added support for CIQ 1.2.6.
    • Added support for Achievements. (Summary of personal records available after an activity is saved, and while still on the saved activity summary page.)
    • Added support to turn off activity monitoring Goal Alerts. (Settings > Activity Monitoring > Goal Alert)
    • Added support to calibrate altimeter at extreme altitudes.
    • Added support for Walk App (Settings > Apps > Walk).
    • Added support for Swimrun App (Settings > Apps > Swimrun).
    • Added additional backlight settings: a 4 second timeout and a 5% backlight level.
    • Improved the readability of golf course names on the golf course list page.
    • Fixed a potential issue where activity history had a ghost entry after deleting all activities.
    • Fixed an issue where the performance condition page was clipping the value being displayed.
    • Fixed a potential issue with deleting saved locations.
    • Fixed a potential issue with vertical distance to destination and glide ratio data fields, while navigating a course.
    • Fixed a potential issue where optical Heart Rate was being used for Lactate threshold calculations.
    • Fixed a potential issue with calorie calculations when using a HRM Tri.
    • Version: 2.93 Beta
    • Datum: 07.04.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_293Beta.zip
    • Changes made from version 2.92 to 2.93:
    • Added support for post activity download of Heart Rate data from HRM-Tri and HRM-Swim sensors. (History > Activity > Download Heart Rate)
    • Added additional information to the workout timer page.
    • Added support for displaying status of GPS EPO data to the About page. (Settings > System > About > Scroll to the EPO Status Page, Note: downloaded EPO data will not always be stored on the device file system)
    • Fixed a potential issue with viewing more than 100 nearest Saved Locations.
    • Fixed a potential issue where GPS EPO downloads were not being applied as expected.
    • Fixed a potential issue where Intensity Minutes were not being calculated correctly for devices paired with a Heart Rate sensor.
    • Fixed a potential issue with Timer alarms not working as expected if Do Not Disturb was enabled.
    • Fixed a potential issue with the instantaneous distance data field for paddle sports.
    • Fixed a potential issue where the Lactate Threshold value was not always available in the My Stats menu.
    • Fixed an issue where the Auto Scroll setting was not available for paddle sports activity profiles.
    • Fixed a potential issue where the Back button wouldn’t take the user back to the activity loop during Ski/Board activities.
    • Fixed a potential issue with auto zoom not working as expected during Waypoint navigation.
    • Fixed potential display issues with the Heart Rate Widget plot.
    • Version: 2.92 Beta
    • Datum: 29.03.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_292Beta.zip
    • Changes made from version 2.91 to 2.92:
    • Added support for saving a waypoint from the Dual Grid page.
    • Improved distance scrolling on the Project Waypoint page.
    • Improved reliability of heart rate data on the Heart Rate graph widget.
    • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
    • Improved accuracy of floors climbed and resting heart rate data.
    • Version: 2.91 Beta
    • Datum: 22.03.2016
    • Installation: Download (Infos: garmin.com/support)
    • Download: fenix3HR_291Beta.zip
    • Changes made from version 2.20 to 2.91:
    • Added support for Elevation Plot navigation data screen (Settings > Navigation > Data Screens > Elevation Plot). Note: this screen should give a 'glanceable' indication of effort remaining along the course being navigated. It shows completed (in green) and future (in blue, if available in the course) altitude data plotted over the distance of the navigation. Ascent fields are also displayed for current accumulation and the amount remaining to destination. Plan your next adventure using the Course creation tool at garminconnect.com!
    • Added support for reviewing elevation history for an activity. (History > Activities > Choose an activity > Elevation Plot. The data field represents total ascent for the activity.)
    • Added support for Auto Lock. (Settings > System > Auto Lock)
    • Added floors climbed history to the steps widget.
    • Added support for configuring Wi-Fi as a Hot Key option. (Settings > System > Hot Keys > Choose a key > Wi-Fi)
    • Added the heading bug to the elevation plot page.
    • Added support for previewing backlight intensity as it is modified.
    • Improved the accuracy and reliability of optical heart rate data. (Requires WHR FW 2.17)
    • Improved Bluetooth to phone connection reliability. (Requires BLE/ANT FW 3.34.)
    • Improved accuracy of distance and lap counting for Pool Swim in certain situations.
Garmin Edge Touring

Garmin Edge Touring, Edge Touring Plus

Garmin Edge Touring (Bild: Garmin)

Garmin Edge Touring (Bild: Garmin)

Edge Touring Software Versionen: 2.60, 2.70, 2.80, 2.90, 4.00, 4.10

  • Version: 4.10
  • Datum: 27.05.2016
  • Installation: Garmin Express
  • Download: EdgeTouring_GCDfile__410.gcd
  • Changes made from version 4.00 to 4.10:
  • Fix the issue that Course Turn Guidance feature not be disabled properly.
  • Version: 4.00
  • Datum: 10.05.2016
  • Installation: Garmin Express
  • Download: EdgeTouring_400.gcd
  • Changes made from version 2.90 to 4.00:
  • New feature! Added support for Varia Rearview Radar. (Edge Touring Plus Only)
  • New feature! Added support for Varia Smart Bike Lights. (Edge Touring Plus Only)
  • Added Ferries avoidance for routing.
  • Added duplicate waypoint name check.
  • Removed addressed/intersections search when no map available.
  • Offered addressing information when searching postcodes.
  • Version: 2.90
  • Datum: 17.11.2015
  • Installation: Garmin Express
  • Download: EdgeTouring_290.gcd
  • Changes made from version 2.80 to 2.90:
  • Support new cycle maps.
  • Fixed an issue causing missed turn prompts during course navigation.
  • Version: 2.80
  • Datum: 20.04.2015
  • Installation: Garmin Express
  • Changes made from version 2.70 to 2.80:
  • Added Course Turn Guidance settings.
  • Showed an prompt for searching invalid countries.
  • Automatically scale map to view a location.
  • Set the proper map scale to add a map location for Route Planner.
  • Disable the address search and the intersection search while the map is not available.
  • Fixed issues that cancel the prompt pages.
  • Fixed an issue of the custom POI loading.
  • Fixed an issue of searching locations.
  • Version: 2.70
  • Datum: 05.03.2014
  • Installation: Garmin Express
  • Changes made from version 2.60 to 2.70:
  • Fixed an issue that caused the map information to be incorrect.
  • Fixed an issue that caused 'Long Route Calculation' to not be displayed.
  • Fixed an issue that caused Address Search to not display results.
  • Fixed an issue that caused the intersection road names to be incorrect on the map.
  • Fixed an issue that caused an unexpected straight line when editing a location.
  • Made improvements to round trip routing.
  • Made improvements to eBike.
  • Made improvements to the route planner.
  • Made improvements to back to start.
  • Made improvements to courses.
  • Added support to load custom POIs.
  • Delay displaying prompt pages until the device has fully power on.
  • Version: 2.60
  • Datum: 05.11.2013
  • Installation: myGarmin Dashboard
  • Changes made from version 2.40 to 2.60:
  • Fixed an issue causing some maps to not be recognized by the device.
  • Made improvements to increase write speed to an SD card.
  • Improved routing performance while on bike specific paths and trails.
  • Added the ability to press and hold the back arrow to return to the Home screen from the menus.
  • Add a power down prompt when unplugging from a USB charger.
  • Made improvements to Round Trip Routing.
  • Made improvements to the Route Planner.
  • Made improvements to Back to Start.
  • Improved map zooming.
  • Fixed an issue causing messages to not be displayed correctly.
  • Made improvements to the elevation profile.
Garmin Edge 1000

Garmin Edge 1000

Garmin Edge 1000 (Bild: Garmin)

Garmin Edge 1000 (Bild: Garmin)

Edge 1000 Software Versionen: 2.10, 2.30, 2.40, 2.50, 2.57 Beta, 2.70, 2.80, 3.00, 3.10, 4.10, 5.00, 5.10, 90.03 Beta, 90.05 Beta, 5.20, 8.12 Beta, 5.20, 6.00, 7.00, 8.00, 8.10, 8.30, 8.34 Beta, 9.00, 9.10, 9.20, 10.00, 11.10, 11.20, 12.00

  • Version: 12.00
  • Datum: 27.02.17
  • Installation: Garmin Express
  • Changes made from version 11.20 to 12.00:
  • New Feature! Added support for Shimano Di2 Synchronized Shift. Graphical Gear data fields will now blink, an alert tone will be played, and a message banner will be displayed to indicate a chain ring shift is upcoming. Synchronized Shift mode can be changed and the alert tones can be disabled through the Shimano Di2 sensor settings.
  • Added improvements for ANT+ bike lights. Added new Light Beam Activated and network Light Mode settings to ANT+ Bike Lights sensor settings. You can now configure your lights to turn On with a Timer Start by using the new Light Beam Activated setting and there is also a new Trail Light Mode.
  • Added support for Connect IQ version 2.2.3.
  • Fixed power zone settings not being retained.
  • Fixed shutdowns during navigation.
  • Fixed route calculation on special maps.
  • Version: 11.20
  • Datum: 15.12.2016
  • Installation: Garmin Express
  • Changes made from version 11.10 to 11.20:
  • Improvements to Workout Data Screen.
  • Fixed a bug to properly set target power when using the indoor trainer.
  • Version: 11.10
  • Datum: 07.11.2016
  • Installation: Garmin Express
  • Changes made from version 10.00 to 11.10:
  • New feature! Connect IQ 2.2 Support: Connect IQ Apps, Widgets and Data Fields can now communicate with ANT+ Power Meters and Bike Lights that are already connected to your Edge and can also now take advantage of ANT Burst mode. In addition, Apps and Widgets can take advantage of downloadable content and the new Intents system to create new and innovative experiences.
  • New feature! Time in Zone data fields for Heart Rate and Power.
  • Fixed an issue with the Turn Guidance Popup where the Map was not centering on the turn.
  • Version: 10.00
  • Datum: 13.10.2016
  • Installation: Garmin Express
  • Changes made from version 9.20 to 10.00:
  • New feature! Added support for LiveTrack Auto Start.
  • New feature! Added support for GroupTrack.
  • Added Distance and Time Ahead/Behind as configurable data fields.
  • Added Bike Lights options to Shimano Di2 remote controls. Now you can control ANT+ Bike Lights remotely with your Shimano Di2 Dura Ace shifters!
  • Version: 9.20
  • Installation: Garmin Express
  • Changes made from version 9.10 to 9.20:
  • Fixed several issues and made improvements for Varia Vision.
  • Fixed several issues and made improvements for Connect IQ.
  • Fixed an issue uploading activities over Wi-Fi.
  • Made improvements to the software update page.
  • Added mixed surface ride type.
  • Version: 9.10
  • Datum: 15.08.2016
  • Installation: Garmin Express
  • Changes made from version 9.00 to 9.10:
  • Fixed an issue with syncing Connect IQ settings.
  • Fixed issue where activities using Connect IQ data fields could be corrupted.
  • We apologize for the inconvenience, but this update will require you to pair your Edge and phone after the update.
  • Version: 9.00
  • Datum: 08.08.2016
  • Installation: Garmin Express
  • Changes made from version 8.30 to 9.00:
  • New feature! CIQ Apps. This release adds the ability run Connect IQ 2.1 apps, which can be downloaded from Garmin Connect. On the device, apps can be found under the IQ button on the home screen.
  • New feature! CIQ Widgets. This release adds the ability run Connect IQ 2.1 widgets, which can be downloaded from Garmin Connect. Widgets allow for convenient access to information any time. On the device, widgets are accessible by swiping left or right after pulling down the Status Page.
  • Improved experience with ANT+ Bontrager Transmitr bike lights.
  • Version: 8.34 Beta
  • Datum: 14.07.2016
  • Installation: Download
  • Changes made from version 8.30 to 8.34:
  • Added support for Connect IQ 2.1.
  • Changes made from version 8.10 to 8.30:
  • New feature! Added the ability to set an activity’s Ride Type. Garmin Connect will show this setting in each ride’s Activity Type. You can modify the default setting for each Activity Profile and also manually override this value on the save/discard page for each ride. Please note that the following Ride Type settings are not yet supported on Garmin Connect, but will be added in the upcoming weeks: Commuting, eBike, and eMountain.
  • Fixed issue where an extra activity profile is created when importing settings from WKO4.
  • Added support for two new data fields on the Varia Vision: Gear Battery and Gear Combo
  • Fixed issue where CIQ data fields could cause sensor dropouts.
  • Improved experience with Bontrager lights.
  • Fixed issue where FTP could be corrupted, which caused TSS and IF metrics to not be recorded.
  • Fixed issues with gear shifting data.
  • Changes made from version 8.00 to 8.10:
  • Fixed heart rate zone target alerts in workouts.
  • Fixed various Varia Vision issues.
  • Changes made from version 7.00 to 8.00:
  • Varia Vision users: Please update to the latest version of Varia Vision software to maintain compatibility with your Edge.
  • Added support for ANT+ shifting, enabling the SRAM RED eTAP and Campagnolo EPS systems. You can now view current gear information such as gear ratio and battery status directly on your device.
  • Added compatibility with the new WKO4 Coggan individualized power levels (iLevels) by TrainingPeaks. Users can now update their iLevels directly from WKO4 by syncing through a USB connection. To change between using seven power zones or nine Coggan iLevels, go to My Stats > Training Zones > Power Zones > Configuration.
  • Added the following features from the Edge 520:
  • Indoor trainer support
  • Independent GPS modes for activity profiles
  • FTP test workout
  • Auto-FTP calculation
  • Auto-Max HR calculation
  • VO2 Max calculation
  • Recovery advisor
  • Fixed an issue with segment leaderboard and weight file syncing through Garmin Connect Mobile.
  • Changed the 'Gear Ratio' data field to be expressed as the front gear size divided by the rear gear size. For example, 52-11 is now 4.7. You can now view the size expressed in gear teeth with the new 'Gear Combo' data field.
  • Added support for the Connect IQ smartphone API for CIQ developers.
  • Fixed editing CIQ data field settings on Garmin Connect Mobile.
  • Improved the software update process by skipping the initial setup wizard after completing an update.
  • Added Firstbeat settings file storage to allow the VO2Max value to be preserved when updating software.
  • Changed call and text prompts to require a key press to dismiss so they are not missed.
  • Fixed issue with course time for Garmin Connect courses.
  • Fixed activity review for rides recorded without location information (indoor rides).
  • Improved direct routing and Back-to-Start.
  • Changes made from version 6.00 to 7.00:
  • Added support for Connect IQ data fields. On the Edge 1000, you can have ten Connect IQ data fields active at a time. To install Connect IQ data fields, manage your Edge 1000 in Garmin Connect Mobile or Garmin Express. After installing data fields, they will be available in the 'Connect IQ' category when selecting data fields to put on a data screen.
  • Fixed a bug preventing the Vector installation angle wizard from advancing.
  • Fixed a bug causing the 'Next:' field in a workout to show incorrect information when a series of steps are repeated.
  • Improved searching in the 'Where To?' menu.
  • Fixed once-per-second data recording.
  • Changes made from version 5.20 to 6.00:
  • Added support for Varia Vision. Pair with this sensor by turning it on and adding it by selecting Settings > Sensors > Add Sensor > Varia Vision. Choose it from your list of sensors to configure its display settings and data screens.
  • Improved stability of ANT+ and Bluetooth connections to address dropout issues.
  • Improved navigation by leveraging enhanced map data in 2015.30 cycle maps.
  • Added the ability to automatically download software updates over Bluetooth. You will be able to download the next software update after this one by pairing to a smartphone with the Garmin Connect Mobile app. Updates can be installed when you are prompted after they are downloaded. If you choose to wait, a ready-to-install update can be found in Menu > Settings > About > System > Software Update.
  • Fixed an issue causing some manual activity uploads over Bluetooth to fail.
  • Version: 8.12 Beta
  • Datum: 12.05.2016
  • Download: Edge1000_812Beta.zip
  • Changes made from version 8.10 to 8.12:
  • Fixed an issue causing an extra Activity Profile to be created when syncing Power Zone settings from WKO4.
  • Added the ability to set a Ride Type for each activity. This setting will appear in each ride’s Activity Type in Garmin Connect. You can set default Ride Types for each activity profile or manually override this with another type when saving an activity. The device will also automatically set the Ride Type to be saved as Indoors when the GPS is off (you can also manually override this on the save/discard page).
  • Added support for the following data fields on the Varia Vision: Gear Battery and Gear Combo.
  • Notes:
  • This release is intended to fix an issue where an extra activity profile is created when importing settings from WKO4.
  • New feature: this release includes the ability to set an activity’s Ride Type. Garmin Connect will show this setting in each ride’s Activity Type. You can modify the default setting for each Activity Profile and also manually override this value on the save/discard page for each ride. Please note that the following Ride Type settings are not yet supported on Garmin Connect, but will be added in the upcoming weeks: Commuting, eBike, and eMountain.
  • This release also includes support for four new data fields on the Varia Vision: Gear Battery, Gear Combo, Time in Power Zone 8, and Time in Power Zone 9.
  • Version: 6.00
  • Datum: 23.02.2016
  • Installation: Garmin Express
  • Download: Edge1000_600.gcd
  • Changes made from version 5.20 to 6.00:
  • Added support for Varia Vision. Pair with this sensor by turning it on and adding it by selecting Settings > Sensors > Add Sensor > Varia Vision. Choose it from your list of sensors to configure its display settings and data screens.
  • Improved stability of ANT+ and Bluetooth connections to address dropout issues.
  • Improved navigation by leveraging enhanced map data in 2015.30 cycle maps.
  • Added the ability to automatically download software updates over Bluetooth. You will be able to download the next software update after this one by pairing to a smartphone with the Garmin Connect Mobile app. Updates can be installed when you are prompted after they are downloaded. If you choose to wait, a ready-to-install update can be found in Menu > Settings > About > System > Software Update.
  • Fixed an issue causing some manual activity uploads over Bluetooth to fail.
  • Version: 5.20
  • Datum: 08.12.2015
  • Installation: Garmin Express
  • Download: Edge1000_520.gcd
  • Changes made from version 5.10 to 5.20:
  • Improved Varia bike light network performance when using multiple lights and a radar. Update your Varia Rearview Radar to software version 3.00 or greater to take advantage of this.
  • A new Radar sensor type has been added and new radar settings are available under Sensor Details that allow you to control radar tones, color overlay, and vehicle column position. These settings are available only after updating your Varia Rearview Radar to software version 3.00 or greater.
  • Improved radar overlay display when using Edge menus.
  • Improved the light sensor menu and refined light network mode options, adding a high visibility mode.
  • Fixed issue where the odometer data field reported the total distance for the wrong activity profile.
  • Added support for 2015.30 cycle maps.
  • Version: 90.05 Beta
  • Datum: 03.11.2015
  • Installation: Download
  • Changes made from version 90.03 to 90.05:
  • Made various ConnectIQ UI improvements.
  • Version: 90.03 Beta
  • Datum: 30.09.2015
  • Installation: Download
  • Changes made from version to 90.03:
  • Added support for Connect IQ data fields.
  • Installation Instructions
    1. Plug your Edge 1000 device into USB.
    2. Download and unzip the Edge1000_9003Beta.zip and place the GUPDATE.gcd file in the \Garmin folder of your device’s internal storage drive.
    3. Eject device from USB and wait for the update to finish.
    4. If you would like to revert to the latest public release software:
    5. Plug your Edge 1000 device into USB.
    6. Place the GUPDATE-510.gcd file in the \Garmin folder of your device’s internal storage drive and rename it to GUPDATE.gcd.
    7. Eject device from USB and wait for the update to finish. NOTE: If you revert to the latest public release software, all of your settings will be reset to defaults. Your user data (history, courses, etc.) will be retained.
  • Version: 5.10
  • Datum: 23.09.2015
  • Installation: Garmin Express
  • Changes made from version 5.00 to 5.10:
  • Added support for Varia Smart Bike Lights. Now you can form a network of lights including head lights, tail lights, and a rearview radar tail light.
  • Added the ability to edit crank length for PowerTap P1 pedals.
  • Fixed an issue where the totals for custom activity profiles would be erased after a software update.
  • Fixed an issue where auto lap distance, auto pause speed, alert distances, and virtual partner speed would revert back to default values after a software update.
  • Fixed an issue where segments would randomly not start.
  • Fixed an issue where courses would sometimes not start at a point along the course but away from the start location.
  • Improved device performance with many segments loaded.
  • Version: 5.00
  • Datum: 13.08.2015
  • Installation: Garmin Express
  • Changes made from version 4.10 to 5.00:
  • Added support for Varia Rearview Radar.
  • Improved stability of device transfers.
  • Version: 4.10
  • Datum: 22.07.2015
  • Installation: Garmin Express
  • Changes made from version 3.10 to 4.10:
  • Added support for Strava Live Segments. To start the Strava Live Segments experience, go to connect.garmin.com and link your Garmin Connect account with your Strava premium account through the segments widget, then sync with your Edge 1000 through WiFi, Garmin Connect Mobile, or Garmin Express.
  • Increased the amount of segments that can be stored from 50 to 100.
  • Fixed Edge Remote connection issues.
  • Fixed an issue with route replacement.
  • Fixed missed calls not displaying the phone number when connected to an Android phone.
  • Improved Bluetooth file download notifications.
  • Fixed Distance Ahead/Behind data field when riding a segment with the Virtual Partner training page disabled.
  • Fixed Course Point Distance data field.
  • Fixed Pedal Smoothness and Torque Effectiveness ride summary fields with left-side-only power meters.
  • Version: 3.10
  • Datum: 22.06.2015
  • Installation: Garmin Express
  • Changes made from version 3.00 to 3.10:
  • Restored support for legacy heart rate monitors.
  • Version: 3.00
  • Datum: 28.04.2015
  • Installation: Garmin Express
  • Changes made from version 2.80 to 3.00:
  • New feature! Added the ability to update sensor software on supporting sensors which includes Vector power and HRM-Run sensors.
  • New feature! Added the ability to configure Vector features. Turning off the Cycling Dynamics setting will help to extend Vector battery life. To do so, select Settings > Sensors > [your Vector sensor] > Sensor Details > Vector Features > Cycling Dynamics.
  • Due to the previous change, cycling dynamics, torque effectiveness and pedal smoothness capabilities for supporting Vector power sensors will need to be re-enabled. These new settings can be found in the Settings > Sensors > [your Vector sensor] > Sensor Details > Vector Features menu.
  • New feature! Added the ability to pair Vector S and Vector 2S pedals to a Vector upgrade pedal.
  • Improved the accuracy of the ascent and descent calculations.
  • Fixed bug preventing downloading training plans over Wi-Fi.
  • Fixed bugs and made improvements to the Elevation graph page.
  • Improved turn guidance instructions.
  • Fixed issue where parts of map files would not load. This issue could be seen on devices that contained large map files such as the GB Discoverer Premium 1:25K maps.
  • Version: 2.80
  • Datum: 04.03.2015
  • Installation: Garmin Express
  • Changes made from version 2.70 to 2.80:
  • Fixed an issue causing automatic upload failures with the Garmin Connect Mobile app on Android.
  • Fixed an issue causing manual upload failures with the Garmin Connect Mobile app on both Android and iPhone platforms.
  • Version: 2.70
  • Datum: 16.12.2014
  • Installation: Garmin Express
  • Changes made from version 2.50 to 2.70:
  • Added landscape orientation option. To switch orientation, select Settings > System > Display > Orientation > Landscape.
  • Added Vector Cycling Dynamics support, which includes Power Phase (PP) and Platform Center Offset (PCO). Visit http://sites.garmin.com/vector to learn more.
  • Added Shimano Di2 shifter remote control support. Now you can advance training pages on your Edge 1000 remotely with your Shimano Di2 shifters.
  • Improved stability of ANT and Bluetooth connections.
  • Fixed issue with sensors not automatically connecting on power-up.
  • Fixed issue with Wi-Fi network settings disappearing.
  • Improved device transfers.
  • Improved odometer data field by displaying the total distance for the active activity profile.
  • Improved course settings by allowing independent control of turn guidance and off course warnings.
  • Fixed issue with custom maps failing to load from internal storage.
  • Fixed issue causing the elevation profile to display incorrectly while riding a segment.
  • Fixed issue causing the Edge Remote and Shimano Di2 icons to not display in the status bar when connected.
  • Made numerous general UI improvements.

 

  • Version: 2.57 Beta
  • Datum: 11.11.2014
  • Installation: Download
  • Changes made from version 2.50 to 2.57:
  • Added landscape orientation option. To switch orientation, select Settings > System > Display > Orientation > Landscape.
  • Improved stability of ANT and Bluetooth connections.
  • Fixed issue with sensors not automatically connecting on power-up.
  • Fixed issue with Wi-Fi network settings disappearing.
  • Improved device transfers.
  • Improved odometer data field by displaying the total distance for the active activity profile.
  • Improved course settings by allowing independent control of turn guidance and off course warnings.
  • Fixed issue causing the elevation profile to display incorrectly while riding a segment.
  • Fixed issue causing the Edge Remote icon to not display in the status bar when connected.
  • Made numerous general UI improvements.

 

  • Version: 2.50
  • Datum: 24.09.2014
  • Installation: Garmin Express
  • Changes made from version 2.40 to 2.50:
  • Added support for iOS 8 call and text notifications.
  • Version: 2.40
  • Datum: 28.08.2014
  • Installation: Garmin Express
  • Changes made from version 2.30 to 2.40:
  • Added support for call and text notifications for Android (4.3 and higher). Requires Garmin Connect Mobile app update (2.3 and higher).
  • Improved Bluetooth connection stability.
  • Added many options for courses and segments, including a turn guidance option that is off by default. Previously, turn guidance was always on, enabling turn-by-turn directions using available roads in the map. With turn guidance off, an off-course warning will be given if you stray from the course.
  • Added Vector S support.
  • Added a step to enter crank length to the initial Vector setup process.
  • Added ability to customize Vector left and right pedal scale factors.
  • Fixed issues with setting slope for SRM power meters.
  • Added activity profile totals, which includes total distance, time, calories, and number of rides. If you miss the bike profile odometer feature, you can track totals by creating activity profiles for each bike.
  • Added upcoming elevation information to the elevation profile while following a course, segment, or route.
  • Increased text size for alert messages.
  • Improved post-ride experience by adding an activity review and an improved personal records summary.
  • Improved reliablity of device transfers.
  • Improved Wi-Fi stability.
  • Fixed issue sending WEP passwords from Garmin Express to the device.
  • Made numerous general UI improvements.
  • Version: 2.30
  • Installation: Garmin Express
  • Changes made from version 2.20 to 2.30:
  • Made improvements to Bluetooth connection stability.
  • Made improvements to prevent unnecessary touch screen locked messages. While recording an activity and other situations when touch accuracy is critical, a large amount of perspiration or rain may cause the screen to lock. To clear the locked status remove perspiration or rain by swiping the screen with a full, bare palm.
  • Added Device Transfers feature for sharing Courses, Workouts, and Segments between Edge 1000 devices.
  • Added Segment support to the Route Planner.
  • Fixed issue preventing Shimano Di2 gear sizes from being entered. Some users may need to reenter the gear sizes following the update.
  • Changed supported Wifi WEP security from WEP-shared to WEP-open.
  • Fixed an issue causing Bluetooth Smart to advertise without a smart phone being previously paired.
  • Made numerous improvements to Segments, including smarter detection to ignore Segments that are heading in the opposite direction of travel and increased Segment name length.
  • Made improvements to Route Planner.
  • Added Bluetooth and Wifi MAC addresses to the device About page.
  • Added Sensor About page for all sensors. Some older ANT+ sensors may not support sending this information.
  • Fixed issue causing unrealistic values to be calculated for Normalized Power, Intensity Factor, and Training Stress Score with some power sensors.
  • Added Navigation in Progress to the Status Bar / Connections UI for easier access to stopping navigation.
  • Fixed collection of bugs, freezes, and shutdowns.
  • Made several general UI improvements.
  • Version: 2.20
  • Installation: Garmin Express
  • Changes made from version 2.10 to 2.20:
  • Made various improvements to segments.
  • Improved ANT sensor reception.
  • Improved Bluetooth connection setup.
  • Fixed issues with connecting to some Wi-Fi networks.
  • Improved Edge Remote connection reliability.
Garmin Edge Explore 1000

Garmin Edge Explore 1000

Garmin Edge Explore 1000 Software Versionen: 2.10, 3.00, 4.00, 4.10, 5.00, 6.00, 7.10

  • Version: 7.10
  • Datum: 04.01.2017
  • Installation: Garmin Express
  • Changes made from version 6.00 to 7.10:
  • New feature! Added support for LiveTrack Auto Start.
  • New feature! Added support for GroupTrack.
  • Fix Course Creator issues.
  • Version: 5.00, 6.00
  • Datum: 10.11.2016 (6.00)
  • Installation: Garmin Express
  • Changes made from version 5.00 to 6.00:
  • New feature! Connect IQ 2.2 Support: Connect IQ Apps, Widgets and Data Fields can now communicate with ANT+ Power Meters and Bike Lights that are already connected to your Edge and can also now take advantage of ANT Burst mode. In addition, Apps and Widgets can take advantage of downloadable content and the new Intents system to create new and innovative experiences.
  • Fixed an issue with the Turn Guidance Popup where the Map was not centering on the turn.
  • Improved Incident Detection Alert Page to have proper control flow.
  • Changes made from version 4.10 to 5.00:
  • Added support for Varia Vision. Pair with this sensor by turning it on and adding it by selecting Settings > Sensors > Add Sensor > Varia Vision. Choose it from your list of sensors to configure its display settings and data screens.
  • Improved experience with Bontrager lights.
  • Improved experience with incident detection.
  • Resolved issue connecting device to computer
  • Resolved issues related to syncing over WiFi and phone
  • Version: 4.10
  • Datum: 17.08.2016 (4.00)
  • Installation: Garmin Express
  • Changes made from version 4.00 to 4.10:
  • Fixed an issue with syncing Connect IQ settings.
  • Fixed issue where activities using Connect IQ data fields could be corrupted.
  • We apologize for the inconvenience, but this update will require you to pair your Edge and phone after the update.
  • Version: 3.00, 4.00
  • Datum: 0.8.08.2016 (4.00)
  • Installation: Garmin Express
  • Changes made from version 3.00 to 4.00:
  • New feature! CIQ Apps. This release adds the ability run Connect IQ 2.1 apps, which can be downloaded from Garmin Connect. On the device, apps can be found under the IQ button on the home screen.
  • New feature! CIQ Widgets. This release adds the ability run Connect IQ 2.1 widgets, which can be downloaded from Garmin Connect. Widgets allow for convenient access to information any time. On the device, widgets are accessible by swiping left or right after pulling down the Status Page.
  • Improved Incident Detection usability and handling when not connected to a phone.
  • Changes made from version 2.10 to 3.00:
  • Added support for Connect IQ data fields. On the Edge Explore 1000, you can have ten Connect IQ data fields active at a time. To install Connect IQ data fields, manage your Edge Explore 1000 in Garmin Connect Mobile or Garmin Express. After installing data fields, they will be available in the 'Connect IQ' category when selecting data fields to put on a data screen.
  • Fixed a bug preventing the Vector installation angle wizard from advancing.
  • Version: 2.10
  • Datum: 10.12.2015
  • Installation: Garmin Express
  • Changes made from version 2.00 to 2.10:
  • Improved Varia bike light network performance when using multiple lights and a radar. Update your Varia Rearview Radar to software version 3.00 or greater to take advantage of this.
  • A new Radar sensor type has been added and new radar settings are available under Sensor Details that allow you to control radar tones, color overlay, and vehicle column position. These settings are available only after updating your Varia Rearview Radar to software version 3.00 or greater.
  • Improved radar overlay display when using Edge menus.
  • Improved the light sensor menu and refined light network mode options, adding a high visibility mode.
  • Improved the incident detection alert display layout.
  • Improved the stability of incident detection and fix the duplicate incident record in the activity summary.
  • Improve the performance of POI search.
  • Fix the automatic re-connection of LEV sensor.

5 Kommentare

  1. Das Etrex 35 Touch wird ohne zu fragen auf die FW 3.50 geupdatet. Anschließend läuft die Zeiterfassung auf dem Profil hoch, ohne das es gestartet wurde.
    Hier scheint es noch Klärungsbedarf zu geben.
    Die FW 3.40 läuft recht stabil.

    Antworten
    • Hallo, siehe:
      Einstellungen > Tracks > Auto-Start > Aus bzw. Tracks > Erweiterte Einst. > Reiseaufzeichnung > Beim Tracking
      sollte helfen.
      Grüße

      Antworten
      • Bringt leider nichts. Habe in allen Profilen die Auto-Start Funktion abgeschaltet.
        Beim ersten Einschalten des Gerätes muß man die Aufzeichnung noch manuell starten. Danach startet die Aufzeichnung immer wieder automatisch. Auch wenn man alle Aufzeichnungen/ Tracks löscht.
        Beim Ausschalten und anschließendem Einschalten steht die letzte Zeit im Profil und beim starten läuft sie ab da weiter. Da funktioniert m.E. irgendwas nicht.
        Zurück zu FW 3.40

        Antworten
  2. Für Garmin eTrex 20/30 ist seit 20.08.2013 eine Version 3.20 verfügbar (garmin-etrex.wikispaces.com/firmware).

    VORSICHT! Ein Downgrade von 3.20 auf 3.00 ist offensichtlich nicht möglich [3.00 ist nur ca. 1,2 MB groß (zum Vergleich: 3.20 ist ca. 8,9 MB groß)]. (3.10 ist auf der genannten Website nicht zum Download angeboten.) Stattdessen kann auf 2.90 downgegraded werden.

    Antworten
  3. Kann es sein, dass die FW nur Beta-Versionen sind ?
    Weder über Basecamp, noch Webupdater werden für meinen OE450 bzw. 62 ST Updates angeboten, auch über mygarmin wird mir kein Update angezeigt ?

    Gruß

    Frank

    Antworten

Einen Kommentar abschicken

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.




Pin It on Pinterest

Share This